View Inconel 625 Mặt bích

Buyers often write only “ASTM B564 UNS N06625 flange.” That identifies the material route, but it does not fully define the required item. Cấp 1 versus Grade 2 affects heat-treatment condition and intended temperature regime, trong khi ASME B16.5 or another dimensional standard controls a different part of the order.

Cái gì ASTM B564 bìa

ASTM B564 is a material specification for nickel-alloy forgings. Vì UNS N06625, it sets requirements associated with chemistry, xử lý nhiệt, mechanical properties and testing. It does not, by itself, define every flange dimension or pressure-temperature rating.

ASTM B564 Cấp 1 vs Grade 2

The 1100°F boundary is not permission to select a flange from temperature alone. Áp suất thiết kế, applicable code rules, môi trường ăn mòn, fabrication history, mating components and project-specific acceptance criteria still need review. Hot working or subsequent reannealing can also affect properties, so the delivered condition and traceability matter.

ASTM B564 vs ASME B16.5

ASTM B564 Và ASME B16.5 are complementary, not competing specifications. A usable order may identify ASTM B564 UNS N06625 Cấp 1 hoặc lớp 2 for the forged material, sau đó ASME B16.5 for the applicable flange size, lớp học, kích thước, dung sai, marking and testing framework.

“Hợp kim 625 flange” is therefore incomplete. Buyers should add flange type, NPS hoặc DN, lớp hoặc PN, đối mặt, lịch trình đường ống khoan hoặc phù hợp, tiêu chuẩn chiều và phiên bản. Pressure class is not a material grade, và lớp 1 hoặc lớp 2 is not a pressure rating.

What to Check on the MTC

The MTC should be checked against the purchase order and the adopted specification edition. Tối thiểu, review:

1. Nhận dạng vật chất: ASTM B564, UNS N06625 and the ordered Grade 1 hoặc lớp 2 tình trạng.
2. Truy xuất nguồn gốc: heat or lot reference connected to the flange marking and item documentation.
3. Xử lý nhiệt: the reported condition and any required temperature record or statement.
4. Chemistry and mechanical results: actual reported values assessed against the governing edition and purchase order.
5. Required tests: only the examinations, supplementary requirements and acceptance criteria actually invoked by the order.
6. Certification scope: document type, manufacturer identity, inspector or third-party endorsement when contractually required.

Producer datasheets are useful for typical alloy behaviour, but typical values are not acceptance limits for a purchase order. Acceptance should follow the cited material specification, dimensional standard and project requirements.

RFQ Checklist for UNS N06625 Mặt bích

Câu hỏi thường gặp

Là ASTM B564 Tương tự với Inconel 625?

KHÔNG. ASTM B564 is a product/material specification. UNS N06625 is the alloy designation commonly associated with Alloy 625; Inconel is a trademark. A controlled order should cite the applicable specification, số UNS, grade or condition and product details.

Làm ASTM B564 define flange pressure class?

KHÔNG. Cấp 1 và lớp 2 describe material conditions. Pressure class belongs to the applicable flange standard and must be evaluated with temperature, material grouping and code requirements.

Can Grade 2 replace Grade 1?

Không tự động. Even if Grade 2 is solution annealed, substitution can affect the approved specification, design review, documentation and commercial scope. Obtain formal approval first.

Which standard applies to Alloy 625 mặt bích?

ASTM B564 thường được sử dụng cho UNS N06625 forged flange material. The flange also needs an applicable dimensional standard such as ASME B16.5, or another project-specified standard for its size and type.

Primary References

• ASTM B564-25 specification page — scope and Grade 1/Grade 2 service notes.
• ASME B16.5-2025 Tổng quan — flange ratings, kích thước, dung sai, marking and testing scope.
• Kim loại đặc biệt Hợp kim INCONEL 625 bản tin — typical alloy data; not a substitute for specification acceptance limits.