Thép không gỉ 316 mặt bích được sử dụng rộng rãi trong khai thác dầu khí, đường ống dịch vụ chua, cơ sở xử lý hóa chất, nền tảng ngoài khơi, và môi trường ăn mòn áp suất cao. Tuy nhiên, when equipment is exposed to hydrogen sulfide H2S containing environments, standard stainless steel materials may suffer from sulfide stress cracking SSC, stress corrosion cracking SCC, or hydrogen induced cracking HIC. To ensure safety and long term reliability, flanges must comply with the strict material and testing requirements outlined in NACE MR0175 / ISO 15156, the global standard for materials used in H2S containing oil and gas service. Là nhà sản xuất toàn cầu đáng tin cậy, sasa thuôn dài cung cấp SS 316 flanges that meet or exceed NACE MR0175 / ISO 15156 requirements through rigorous material control, thử nghiệm cơ khí, and manufacturing precision.

This article explains how SS 316 flanges satisfy NACE specifications, what requirements the standard defines, and how Sasaflange ensures compliance for critical sour service applications.

---

Hiểu biết NACE MR0175 / ISO 15156

NACE MR0175 / ISO 15156 is an international standard that specifies the material requirements for equipment exposed to H2S environments in the petroleum and natural gas industries. The standard ensures that materials used in sour service applications:

• Resist sulfide stress cracking

• Minimize hydrogen embrittlement

• Withstand stress corrosion cracking

• Maintain mechanical integrity under sour service pressure

• Provide safe long term operation

Tuân thủ NACE MR0175 is mandatory for oil and gas operators worldwide.

---

Tại sao SS 316 Stainless Steel Is Selected for Sour Service

SS 316 stainless steel is an austenitic stainless steel alloy containing chromium, niken, và molypden. It offers:

• Khả năng chống ăn mòn chung tuyệt vời

• Superior pitting resistance compared to SS 304

• Good resistance to chlorides and acidic environments

• Stable performance in offshore and marine settings

Tuy nhiên, cho dịch vụ chua, SS 316 must meet specific hardness and microstructure requirements to avoid cracking.

---

NACE MR0175 Requirements for SS 316 Mặt bích

To be used in sour service, SS 316 flanges must comply with the following criteria:

1. Hardness Limitations

Hardness must not exceed HRC 22 (khoảng 248 HB or 96 HRB). Excessive hardness increases susceptibility to sulfide stress cracking.

2. Proper Heat Treatment

Materials must be solution annealed to ensure the correct austenitic microstructure and eliminate sensitization.

3. Acceptable Chemical Composition

crom, niken, and molybdenum must remain within strict ASTM A182 limits while ensuring resistance to chloride and H2S induced corrosion.

4. Microstructure Control

Material must be free from harmful phases such as sigma phase or carbide precipitation, which weaken resistance to cracking.

5. Weldability Compliance

Filler metals and weld procedures must also meet NACE requirements.

6. Restricted Use Conditions

Austenitic steels like SS 316 are approved for specific partial pressure limits of H2S and defined environmental conditions.

Sasaflange ensures all flanges sold for NACE service meet these criteria before shipment.

---

How Sasaflange Ensures NACE MR0175 Sự tuân thủ

Manufacturers must follow strict processes to guarantee that SS 316 flanges meet all NACE requirements. Sasaflange uses advanced production control and third party verification to ensure compliance.

---

Certified Raw Material Selection

All SS 316 raw materials used for NACE applications undergo:

• Chemical analysis certification

• Low sulfur content control

• Verified mill test certificates MTC EN10204 3.1

• Traceability through heat numbers

Only materials with precise chemistry and low hardness are accepted into production.

---

Strict Heat Treatment for Sour Service Compatibility

Heat treatment is essential for creating the proper microstructure.

Sasaflange applies:

• Solution annealing at 1900°F to 2100°F

• Rapid quenching to prevent carbide precipitation

• Microstructure verification for sigma phase elimination

This ensures long term resistance to sulfide stress cracking.

---

Hardness Testing to Ensure NACE Compliance

All sour service flanges must comply with the hardness limit of HRC 22.

Sasaflange performs:

• Rockwell hardness tests

• Brinell hardness tests (khi được yêu cầu)

• Hardness mapping for large flanges

• Third party hardness verification (không bắt buộc)

Hardness results are included in the MTC to verify compliance.

---

Non Destructive Testing (NDT) for Structural Integrity

To prevent failure in sour service, NDT ensures the flanges are free from harmful defects.

Typical NDT Methods Used:

• Kiểm tra siêu âm UT

• Thử nghiệm thẩm thấu thuốc nhuộm PT

• Kiểm tra chụp ảnh phóng xạ RT (for weld integrity)

• Visual inspection with enhanced lighting

NDT ensures no cracks, laminations, or inclusions are present.

---

PMI Testing for Accurate Alloy Identification

Positive Material Identification PMI confirms that the flange alloy is true SS 316 and not a lower grade.

PMI provides:

• Spectrochemical analysis

• Molybdenum verification

• Nickel content confirmation

This ensures no material mix ups during production or shipment.

---

Dimensional Accuracy and Surface Finish for Safe Operation

Even with compliant materials, dimensional precision is essential for leak free sealing.

Sasaflange checks:

• Độ dày mặt bích

• Căn chỉnh lỗ bu lông

• Bore tolerance

• Facing roughness (tiêu biểu 125 ĐẾN 250 AARH)

• Gasket seating area integrity

Accurate dimensions minimize stress concentrations, improving sour service performance.

---

Pressure Class Availability for NACE Compliant SS 316 Mặt bích

Sasaflange provides NACE certified SS 316 flanges in all major pressure classes:

• Lớp học 150

• Lớp học 300

• Lớp học 600

• Lớp học 900

• Lớp học 1500

• Lớp học 2500

Compliance is guaranteed across ASME B16.5, B16.47, và VN 1092 tiêu chuẩn chiều.

---

Applications Requiring NACE Certified SS 316 Mặt bích

Công nghiệp dầu khí

• Sour gas pipelines

• High H2S concentration wells

• Giàn khoan ngoài khơi

• Refineries and separators

Petrochemical Processing

• Acidic gas environments

• Hydrogen rich process lines

Hàng hải và ngoài khơi

• High chloride exposure

• Subsea systems

Chemical and Energy Sectors

• Corrosive processing reactors

• High pressure fluid systems

In these critical environments, non compliant flanges can fail catastrophically.

---

Documentation and Certification Provided by Sasaflange

Every NACE compliant flange is shipped with a full documentation package, bao gồm:

• MTC EN10204 3.1

• Hardness test results

• Báo cáo thử nghiệm PMI

• NDT inspection results

• Hồ sơ xử lý nhiệt

• Compliance statement for NACE MR0175 / ISO 15156

• Truy xuất nguồn gốc số nhiệt

This ensures complete transparency for engineering, mua sắm, and inspection teams.

---

Why NACE Compliance Matters in Oil and Gas Projects

NACE MR0175 compliance ensures:

• Long term safe operation

• Prevention of catastrophic cracking

• Guaranteed material performance

• Chi phí bảo trì thấp hơn

• Compliance with global project specifications

Non compliant materials can lead to severe failures and regulatory penalties.

---

Phần kết luận

Cuộc họp NACE MR0175 / ISO 15156 requirements is essential for stainless steel flanges used in sour service environments containing hydrogen sulfide. Through controlled raw material selection, precise heat treatment, strict hardness control, comprehensive NDT, Xác minh PMI, and full certification, sasa thuôn dài ensures that every SS 316 flange meets the highest standards of safety and reliability. These compliant flanges are trusted by major oil and gas operators worldwide and play an essential role in maintaining the integrity of sour gas pipelines, nhà máy lọc dầu, và hệ thống ngoài khơi.