Sự miêu tả
Carbon steel anchoring components
ASTM F1554 Cấp 36 Bu lông neo
Factory-direct supply of common straight, uốn cong, headed and headless anchor bolt configurations. Each quotation is checked against the drawing, chủ đề, hoàn thành, nut and washer requirements.
Là gì ASTM F1554 Cấp 36?
ASTM F1554 Cấp 36 is a steel anchor-bolt grade with a specified 36 ksi yield-strength level. ASTM F1554 covers straight and bent, headed and headless anchor bolts, including all-thread rod used for anchoring structural supports to concrete foundations. The product may be called an anchor bolt or anchor rod depending on its geometry and project terminology.
Cấp 36 is selected when the project drawing, structural specification or engineer identifies it. The grade designation does not by itself define the complete part. Đường kính, chiều dài tổng thể, thread dimensions, bend geometry or head style, projection, embedment, lớp phủ, quả hạch, washers and documentation must also be stated.
Product and ordering specification
| Sản phẩm | ASTM F1554 Cấp 36 steel anchor bolts or anchor rods |
|---|---|
| Tiêu chuẩn | ASTM F1554; the edition stated on the purchase order governs |
| Cấp | Cấp 36, identified by the complete order description and required marking/documentation |
| Common configurations | Straight rod, L-bolt, J-bolt, headed anchor bolt, headless anchor bolt or all-thread anchor rod, as shown on the approved drawing |
| Kích thước | Common market diameters and lengths; thread length, bend radius, hook dimensions, projection and embedment are confirmed from the order drawing |
| Thread | Chuỗi chủ đề, lớp học, đường kính, pitch and threaded length as ordered; do not mix inch and metric descriptions |
| Nuts and washers | Compatible nuts and washers supplied when requested; cấp, phong cách, quantity and coating must match the project specification |
| Surface condition | Plain or zinc-coated options where specified and technically suitable; coating scope and matching hardware are confirmed before production |
| Packaging | Common market and export packaging, including bundles, cartons, pallets, cases and order-specific protection |
| thời gian dẫn | As fast as 7 working days after technical and commercial confirmation; actual timing depends on geometry, Số lượng, lớp phủ, kiểm tra và tài liệu |
The product image is a representative photograph of F1554 anchor bolts. Appearance cannot establish Grade 36 Tuân thủ; cấp, kích thước, marking and documentation are verified for the specific order.
Available anchor bolt configurations
Straight anchor rods
Straight rods can be supplied with threads at one end, both ends or over the full length. State whether the drawing dimensions use overall length or another reference point.
L-shaped and J-shaped bolts
Bent anchors require the leg or hook dimensions, inside bend radius, bend angle, threaded projection and overall length. A drawing reduces dimensional ambiguity.
Headed anchor bolts
Headed designs are supplied to the specified head style and dimensions. Head geometry, shank length and thread position must be defined before manufacture.
Assemblies
quả hạch, vòng đệm, plates or templates can be reviewed as part of the order. Each component requires its own material, kích thước, finish and quantity.
How to define the order
1. Grade and edition
Tình trạng ASTM F1554 Cấp 36 and the required standard edition or project specification.
2. Hình học
Provide the anchor type, đường kính, chiều dài tổng thể, thread and every bend, head or projection dimension.
3. Finish and assembly
Define plain or coated condition plus the nut, máy giặt, plate and template requirements.
4. Quality scope
List marking, truy xuất nguồn gốc, điều tra, test report and third-party requirements before quotation.
Coating and assembly considerations
ASTM F1554 includes provisions for zinc coating when coating is ordered. The quotation should identify the coating process, the surfaces to be coated and whether nuts and washers are to be supplied as a coordinated assembly. Coating affects thread fit, handling and the selection or preparation of mating components, so a general request for “galvanized bolts” is not a complete purchase description.
For plain anchors, state whether temporary rust-preventive protection is acceptable for shipment. For coated anchors, identify any special packaging needed to protect the surface during transport. Field modification, hàn, heating, rethreading or coating repair should not be assumed acceptable without the responsible engineer’s review.
Common applications
ASTM F1554 anchor bolts are used to anchor structural supports to concrete foundations. Typical project uses include building columns, equipment supports, bearing plates, sign structures, street-lighting supports and traffic-signal supports. The exact grade and geometry are chosen by the design specification; similar-looking anchors may have different material, sức mạnh, coating or traceability requirements.
Cấp 36 should not be substituted for Grade 55, Cấp 105 or an unspecified commercial anchor rod solely because the dimensions appear similar. A substitution review must consider the governing drawing, design loads, yêu cầu cơ khí, installation method and applicable code.
Inspection and documentation
Order documentation can include dimensional inspection, truy xuất nguồn gốc vật liệu, marking checks, coating records, mechanical test reports or third-party inspection when specified. These items are not automatically included in every quotation. State the documentation and witnessing requirements at RFQ stage so they can be priced and scheduled correctly.
A product photograph, quotation title or material name is not a certificate of compliance. Acceptance should be based on the approved order description, required test documentation, marking and inspection results. SASA FLANGE reviews the requested supply configuration and confirms the available documentation for the order.
Danh sách kiểm tra RFQ
- ASTM F1554 Cấp 36 and the required standard edition
- Anchor type: straight, L-shaped, J-shaped, headed, headless or all-thread rod
- Đường kính, chiều dài tổng thể, loạt chủ đề, thread class and threaded length
- Bend, hook, head, projection and embedment dimensions from the drawing
- Hạt, máy giặt, plate and template details with quantities
- Plain or coated finish, coating process and coating scope
- Đánh dấu, truy xuất nguồn gốc, test report and inspection requirements
- Order quantity, bao bì, điểm đến và ngày giao hàng được yêu cầu
Câu hỏi thường gặp
What does Grade 36 mean in ASTM F1554?
It identifies the 36 ksi yield-strength grade within ASTM F1554. The ordered standard edition and complete product description control the material, thử nghiệm, dimensions and acceptance requirements.
Can Grade 36 anchor bolts be galvanized?
Zinc-coated supply can be reviewed when specified. Quá trình phủ, coated surfaces, thread fit and matching nuts and washers must be confirmed for the order.
Can you supply L-bolts, J-bolts and straight rods?
Common market straight, uốn cong, headed and headless configurations can be supplied. Send a drawing with all geometry and thread dimensions for confirmation.
What is the fastest lead time?
Lead time can be as fast as 7 working days after technical and commercial confirmation. Hình học, Số lượng, lớp phủ, inspection and documentation determine the actual schedule.
Request an ASTM F1554 Cấp 36 quotation
Send the drawing, đường kính, chiều dài, chủ đề, configuration, hoàn thành, assembly parts, tài liệu, số lượng và điểm đến. We will confirm the available supply configuration and schedule.
