Mặt bích là thành phần quan trọng trong hệ thống đường ống, kết nối đường ống, van, và thiết bị đồng thời đảm bảo vận hành an toàn và hiệu quả dưới áp lực. Mặc dù tồn tại nhiều loại mặt bích—chẳng hạn như mặt bích cổ hàn, trượt trên, mù, and socket weld—some are designed for very specific functions. One such specialized flange is the mặt bích lỗ.

Orifice flanges are not only connectors but also measurement devices, enabling operators to monitor fluid flow in a pipeline. This makes them especially valuable in industries such as oil and gas, xử lý hóa chất, xử lý nước, và phát điện.

This article explains what an orifice flange is, nó hoạt động như thế nào, its design features, ứng dụng, and why industries depend on it for accurate flow measurement.

---

Mặt bích Orifice là gì?

MỘT mặt bích lỗ is a type of flange assembly that incorporates an orifice plate for measuring the flow rate of liquids, chất khí, or steam in a pipeline. Unlike standard flanges, orifice flanges include radial, tapped holes drilled into the flange ring. These allow differential pressure to be measured across the orifice plate, enabling calculation of flow.

Nói một cách đơn giản, orifice flanges act as both a structural connection and an instrument for flow monitoring.

---

Components of an Orifice Flange Assembly

An orifice flange assembly typically consists of:

• Mặt bích lỗ: A pair of flanges with pressure tap holes.

• Orifice Plate: A thin plate with a precise hole in the center.

• Bolts and Gaskets: To secure the assembly and ensure leak-proof operation.

• Jack Screws: Facilitate separation of flanges during plate replacement or inspection.

---

Working Principle of an Orifice Flange

1. Fluid flows through the pipeline and reaches the orifice plate.

2. The orifice plate introduces a restriction, creating a pressure drop across the plate.

3. Pressure taps in the flange measure the differential pressure before and after the orifice plate.

4. Flow rate is calculated based on this pressure difference using Bernoulli’s principle.

This method is widely used due to its simplicity, độ tin cậy, and accuracy.

---

Tiêu chuẩn và thông số kỹ thuật

Orifice flanges are manufactured according to international standards to ensure compatibility and accuracy:

• ASME B16.36: Standard for orifice flanges.

• ASME B16.5: Covers dimensions for flanges up to 24 inch.

• Xếp hạng áp lực: Typically available from Class 300 đến lớp 2500.

• Kích cỡ: Commonly manufactured from ½ inch to 24 inches or larger, depending on pipeline design.

---

Materials Used in Orifice Flanges

Orifice flanges are produced in a variety of materials depending on operating conditions:

• Thép cacbon (A105, A350 LF2): Economical choice for general service.

• thép không gỉ (304, 316, 321, 347): Khả năng chống ăn mòn vượt trội.

• Thép hợp kim (F11, F22): High strength for elevated temperature applications.

• Thép không gỉ song công: Excellent resistance to stress corrosion cracking in chloride-rich environments.

• Hợp kim niken (Inconel, Hastelloy, Monel): Exceptional resistance to aggressive chemicals.

---

Advantages of Orifice Flanges

• Đo lưu lượng chính xác: Simple and effective method for monitoring flow rates.

• Dual Functionality: Acts as both a flange and a measuring device.

• Standardized Design: Complies with ASME standards for easy integration.

• Hiệu quả về chi phí: More affordable than advanced flow meters while providing reliable results.

• Tính linh hoạt: Suitable for liquids, chất khí, và hơi nước.

---

Applications of Orifice Flanges

Orifice flanges are widely used in industries where flow monitoring is critical:

Dầu khí

Used to measure crude oil, khí tự nhiên, and refined product flow in pipelines and processing plants.

Hóa chất và hóa dầu

Enables accurate flow measurement of corrosive chemicals in refineries and chemical plants.

Phát điện

Monitors steam flow in boilers, tua-bin, and cooling water circuits.

Xử lý và phân phối nước

Measures water flow in treatment facilities, pumping stations, and distribution networks.

Hàng hải và ngoài khơi

Used in shipboard systems and offshore platforms to track fuel and cooling flows.

---

Types of Orifice Plates Used in Orifice Flanges

Different orifice plate designs can be fitted into the flange assembly:

• Concentric Orifice Plate: Phổ biến nhất, with a central bore for general flow measurement.

• Eccentric Orifice Plate: Bore offset from the center, used for measuring dirty or slurry fluids.

• Segmental Orifice Plate: Semi-circular bore, suitable for gas or liquid with suspended solids.

• Quadrant Edge Orifice Plate: Rounded bore edge, ideal for viscous fluids.

---

Cài đặt và bảo trì

• Cài đặt: Orifice flanges are installed in pairs, with the orifice plate clamped between them. Pressure taps are aligned for differential pressure measurement.

• BẢO TRÌ: Plates can be removed and replaced using jack screws without dismantling the entire system. Regular inspection ensures accuracy.

---

Difference Between Orifice Flanges and Standard Flanges

• Standard Flanges: Serve only as mechanical connectors.

• Mặt bích lỗ: Connect pipes and measure flow simultaneously.

This unique functionality makes orifice flanges indispensable in flow-critical systems.

---

Case Study Example

A power plant needed to monitor steam flow through its high-pressure boilers. Traditional flow meters were too costly. By installing orifice flanges with concentric plates, the plant achieved reliable flow measurement, simplified maintenance, and reduced equipment costs, all while meeting ASME standards.

---

Future Trends in Orifice Flanges

• Integration with Digital Monitoring: Coupled with smart sensors for real-time data collection.

• Vật liệu tiên tiến: Increased use of duplex and nickel alloys for extreme environments.

• Customized Designs: Tailored flange and plate assemblies for specific flow and pressure conditions.

---

Why Choose sasaflange for Orifice Flanges

When sourcing critical flange components, reliability and precision are essential. sasa thuôn dài supplies high-quality orifice flanges manufactured to ASME B16.36 and B16.5 standards. With options in carbon steel, thép không gỉ, thép hợp kim, và hợp kim niken, sasa thuôn dài ensures accurate flow measurement and long-lasting performance across industries.

---

Phần kết luận

An orifice flange is a specialized flange assembly used to measure flow rates in pipelines by introducing an orifice plate and capturing differential pressure readings. It combines the strength of a flange connection with the functionality of a flow measurement device, making it highly valuable in industries such as oil and gas, xử lý hóa chất, phát điện, và xử lý nước.

With standardized design, tính linh hoạt, và hiệu quả chi phí, orifice flanges remain one of the most widely used solutions for monitoring fluid flow. By selecting the right materials and working with trusted suppliers, industries can ensure reliable performance and long-term efficiency in critical operations.