وصف
Build-to-print forged or machined component
دوبلكس 2205 شفة مخصصة للرسم
A duplex 2205 custom flange is a build-to-print component whose forging or plate material route is selected from the drawing, service and mechanical requirements.
What is a duplex 2205 custom flange?
Nonstandard drilling, hubs, seal grooves and envelope dimensions are manufactured to the approved revision. The selected product form determines the applicable material specification.
دوبلكس 2205 combines high strength with resistance to chloride stress-corrosion cracking. المعالجة الحرارية, phase balance, welding and service-temperature limits need engineering control.
دوبلكس 2205 custom flange to drawing specifications
| منتج | custom flange to drawing |
|---|---|
| مادة | دوبلكس 2205 / UNS S32205 / EN 1.4462 |
| مواصفات المواد | ASTM A182 F60 or ASTM A240 S32205, as drawing-specified |
| معيار الأبعاد | رسم العملاء; ASME B16.5, ASME B16.47 أو إن 1092-1 references when applicable |
| اتصال / form | Drawing-defined bore, نمط الترباس, تواجه, hub and special features |
| Size and rating | Drawing-defined dimensions, tolerance, mass and acceptance criteria |
| سطح / end detail | Surface roughness, طلاء, marking and edge break per drawing |
| Manufacturing route | Forging or plate route, heat treatment and CNC machining after technical review |
| وثائق التفتيش | EN 10204 3.1 إم تي سي, dimensional report and additional testing when specified |
أبعاد, tolerances and acceptance criteria follow the standard edition and project documents named on the purchase order. Published ranges are enquiry guidance, not a pressure-temperature design approval.
Material and dimensional standards
مواصفات المواد
ASTM A182 F60 applies to UNS S32205 forgings; ASTM A240 S32205 applies to plate. The two product forms should not be described as interchangeable without approval.
Product dimensions
A custom flange is controlled by the approved drawing. Standard references apply only to the features explicitly retained in that drawing.
Typical applications and selection boundary
Applications are examples only. Confirm corrosion resistance, حدود درجة الحرارة, impact properties and code compliance for the actual service.
تصنيع, التفتيش والتوثيق
SASA FLANGE can supply this product with identification linked to the raw-material heat. The agreed inspection and documentation plan is controlled by the purchase order.
Heat-number control and material certificate review.
Drawing dimensions, GD&T features, surface finish and documented hold points.
مؤشر مديري المشتريات, حزب العمال, يوتا, hardness or third-party inspection when specified.
EN 10204 3.1 MTC and ordered inspection reports.
قائمة مراجعة طلب عرض الأسعار (RFQ).
- Material grade and specification
- معيار الأبعاد والإصدار
- الحجم الاسمي
- Quantity and destination
- إم تي سي, تجربة الاقتراب من الموت ومتطلبات التفتيش من طرف ثالث
- Controlled drawing and revision
- Service and design code
- التسامح, surface finish and inspection plan
الأسئلة المتداولة
What should be included in an RFQ for a duplex 2205 custom flange?
State the material specification, معيار الأبعاد والطبعة, مقاس, pressure class or wall thickness, end or facing detail, كمية, inspection requirements and delivery destination.
Can a duplex 2205 custom flange be supplied with EN 10204 3.1 الوثائق?
نعم. EN 10204 3.1 material certification and heat-number traceability can be supplied. مؤشر مديري المشتريات, تجربة الاقتراب من الموت, dimensional reporting or third-party inspection should be stated on the purchase order.
هو دوبلكس 2205 suitable for every corrosive service?
لا. Grade selection depends on the fluid chemistry, مستوى الكلوريد, درجة حرارة, ضغط, fabrication route and governing design code. The project engineer should confirm service suitability.
طلب عرض أسعار
إرسال المعيار, مادة, مقاس, rating or wall thickness, quantity and inspection requirements for a technical and commercial review.
