الشفاه الملولبة الفولاذية المزدوجة سوبر دوبلكس

الفلنجات الفولاذية المزدوجة والمزدوجة للغاية عبارة عن مكونات توصيل أنابيب مقاومة للتآكل مصممة للتجميع الملولب بدون لحام. متوفر في ASTM A182 F51, F53, F55, F60 و UNS S31803, S32205, S32750, درجات S32760, فهي تستخدم على نطاق واسع في النفط والغاز, المعالجة الكيميائية, البحرية, أنظمة معالجة الطاقة والمياه. SASA FLANGE supplies these threaded flanges with EN 10204 3.1 شهادة, اختبار مؤشر مديري المشتريات (PMI) وإمكانية تتبع رقم الحرارة الكامل.

  • ✓درجة: أستم A182 F51, F53, F55, F60; UNS S31803, S32205, S32750, S32760
  • ✓سطح: مخلل, تخميله, الانتهاء من تشكيله, زيت مضاد للصدأ على المناطق الآلية, protective end caps
  • ✓مواصفة: 1/2 بوصة ل 24 بوصة, فصل 150 ل 2500, PN10 إلى PN100

وصف

تفاصيل المنتج

Duplex and super duplex steel threaded flanges are forged flanges with internal tapered or parallel threads for connection to threaded pipe or fittings, eliminating the need for field welding in low to medium vibration service. These flanges combine high mechanical strength with excellent resistance to chloride pitting, تآكل الشقوق وتكسير التآكل الإجهادي, مما يجعلها مناسبة للمنصات البحرية, أنظمة مياه البحر, النباتات الكيميائية, firewater lines and process piping.

SASA FLANGE supplies duplex super duplex steel threaded flanges in standard and customized dimensions according to ASME, EN, DIN, JIS, GB ورسومات المشروع. Each batch can be supplied with chemical analysis, الاختبار الميكانيكي, فحص الأبعاد, اختبار مؤشر مديري المشتريات (PMI)., EN 10204 3.1 شهادة وإمكانية تتبع الرقم الحراري الكامل لدعم متطلبات المشتريات الصناعية الهامة.

  • ✓اسم المنتج: الشفاه الملولبة الفولاذية المزدوجة سوبر دوبلكس
  • ✓درجة المادة: ASTM A182 F51, F53, F55, F60; UNS S31803, S32205, S32750, S32760
  • ✓نوع المنتج: Forged threaded flanges with female NPT or BSP threading
  • ✓الميزة الرئيسية: قوة عالية مع تأليب ممتاز, crevice and chloride SCC resistance
  • ✓التطبيقات: النفط والغاز, في الخارج, تحلية المياه, المعالجة الكيميائية, power plants and water treatment

معلمات المنتج

اسم المنتج الشفاه الملولبة الفولاذية المزدوجة سوبر دوبلكس
درجة المادة ASTM A182 F51, F53, F55, F60; UNS S31803, S32205, S32750, S32760
نوع المادة Duplex stainless steel and super duplex stainless steel
نموذج المنتج Forged threaded flange, female threaded bore, raised face or ring type joint
نطاق الحجم DN15 – DN600 (1/2 بوصة – 24 بوصة)
فئة الضغط فصل 150 – 2500 / PN10 – PN100
وجه الختم الترددات اللاسلكية, FF, آر تي جيه
المعالجة السطحية تخليل, التخميل, الانتهاء من تشكيله, زيت مضاد للصدأ على الأسطح المصنعة
معيار ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, جيجابايت/ت 9119 أو مواصفات العملاء
تقتيش التحليل الكيميائي, اختبار ميكانيكي, اختبار مؤشر مديري المشتريات (PMI)., الأبعاد, الهيدروستاتيكي
شهادة EN 10204 3.1 شهادة المواد المتاحة
خدمة المعالجة قطع, التصنيع باستخدام الحاسب الآلي, الحفر المخصص, معالجة الحجم المخصص

التركيب الكيميائي

The following chemical composition is for reference for typical duplex and super duplex forged flange grades. Final chemical composition depends on the specified ASTM or EN grade, heat number and material test certificate supplied with the order. SASA FLANGE provides MTC-backed chemistry verification and PMI testing for each production batch when required.

عنصر ج و من ص س كر في شهر آخر
F51 / UNS S31803 % 0.03 الأعلى 1.00 الأعلى 2.00 الأعلى 0.03 الأعلى 0.02 الأعلى 21.0 – 23.0 4.5 – 6.5 2.5 – 3.5 ن 0.08 – 0.20
F55 / UNS S32760 % 0.03 الأعلى 1.00 الأعلى 1.00 الأعلى 0.03 الأعلى 0.01 الأعلى 24.0 – 26.0 6.0 – 8.0 3.0 – 4.0 ن 0.20 – 0.30, النحاس 0.50 – 1.00, دبليو 0.50 – 1.00

الخواص الميكانيكية

Mechanical properties shown below are typical minimum values for commonly supplied duplex and super duplex flange grades. Actual values may vary according to grade, حالة المعالجة الحرارية, تزوير نسبة التخفيض وسمك القسم. Material is supplied in accordance with the applicable ASTM forging standard and verified through mechanical testing as required by the purchase specification.

درجة قوة الشد قوة العائد استطالة صلابة كثافة
ASTM A182 F51 / UNS S31803 620 الآلام والكروب الذهنية دقيقة 450 الآلام والكروب الذهنية دقيقة 25% دقيقة 290 HB كحد أقصى 7.80 جم/سم3
ASTM A182 F55 / UNS S32760 750 الآلام والكروب الذهنية دقيقة 550 الآلام والكروب الذهنية دقيقة 25% دقيقة 300 HB كحد أقصى 7.80 جم/سم3

جدول الحجم المشترك

نطاق الحجم فئة الضغط وجه الختم مادة التوفر
DN15 – DN50 فصل 150 – 600 الترددات اللاسلكية F51 / F55 مخزون / إنتاج
DN65 – DN300 فصل 150 – 1500 الترددات اللاسلكية / آر تي جيه F51 / F53 / F55 مخزون / إنتاج
DN350 – DN600 فصل 150 – 2500 الترددات اللاسلكية / آر تي جيه F51 / F55 / F60 إنتاج
DN700 – DN1500 فصل 150 – 900 الترددات اللاسلكية Duplex or super duplex on request صنع حسب الطلب

مقارنة المواصفات المختلفة

يكتب وصف الاستخدام النموذجي
ASME الخيوط شفة Forged flange with female NPT thread in accordance with ASME B16.5 أبعاد عملية الأنابيب, انزلاقات النفط والغاز, خطوط المرافق
AR شفة ملولبة شفة ملولبة تم إنتاجها وفقًا لـ EN 1092-1 drilling and facing dimensions with threaded bore by project requirement European industrial plants and water systems
شفة الترددات اللاسلكية Raised face threaded flange for use with standard gasketed bolted joints General industrial service and chemical lines
RTJ Threaded Flange Ring type joint threaded flange for higher pressure sealing performance High-pressure hydrocarbon and offshore service

المعايير المعادلة والأسماء الدولية

Threaded flange dimensions and drilling can be manufactured to major international standards, while duplex and super duplex material grades are supplied to the applicable forging specification and equivalent regional designation where required. Equivalent names may vary by project documentation, لكن SASA FLANGE can match dimensions, pressure ratings and material requirements based on client specifications and approved drawings.

معيار / منطقة الكود القياسي الدرجة النموذجية / مقابل
الولايات المتحدة الأمريكية ASME B16.5 ASTM A182 F51, F53, F55, F60
أوروبا EN 1092-1 1.4462, 1.4410
ألمانيا DIN 2527 / 2566 DIN equivalent drilling with 1.4462 أو 1.4410 مادة
اليابان JIS B2220 SUS329J3L equivalent project grade on request
الصين جيجابايت/ت 9119 022Cr22Ni5Mo3N, 022Cr25Ni7Mo4N

تدفق عملية الإنتاج

Manufacturing control is critical for duplex and super duplex threaded flanges because corrosion resistance and mechanical properties depend on correct material selection, ممارسة تزوير, المعالجة الحرارية ودقة الآلات. SASA FLANGE applies full traceability and inspection control throughout production.

  • 1. اختيار المواد الخام
  • 2. تزوير / قطع
  • 3. المعالجة الحرارية
  • 4. الآلات الخام
  • 5. الانتهاء من الآلات
  • 6. حفر
  • 7. المعالجة السطحية
  • 8. تقتيش
  • 9. وضع العلامات
  • 10. التعبئة
  • 11. توصيل
خطوة العملية وصف نقطة مراقبة الجودة
المواد الخام حدد قطع أو ألواح تزوير معتمدة شهادة المواد وإمكانية التتبع
تزوير تزوير الساخنة لتحقيق الشكل المطلوب تزوير درجة الحرارة ونسبة التخفيض
المعالجة الحرارية Solution annealing and rapid cooling as applicable التحكم في درجة الحرارة وعقد الوقت
بالقطع وجه الختم, المواضيع, فتحات الترباس, أبعاد دقة الأبعاد والانتهاء من السطح
تقتيش التفتيش النهائي قبل الشحن البعد, سطح, مؤشر مديري المشتريات, الهيدروستاتيكي

فحص المنتج

1. فحص التركيب الكيميائي

Chemical composition inspection verifies that chromium, النيكل, الموليبدينوم, يلبي النيتروجين وعناصر السبائك الأخرى متطلبات درجة الازدواج أو الازدواج الفائق المحددة. Testing is performed against the applicable ASTM or customer specification to confirm corrosion-resistant performance. Results are linked to the heat number and recorded in the material test certificate for full traceability.

2. اختبار الخواص الميكانيكية

Mechanical testing confirms that the forged flange material achieves the required tensile strength, قوة الخضوع, elongation and hardness values for the specified grade. These tests help ensure safe use under pressure and mechanical loading. للأوامر الحرجة, test reports are reviewed together with heat treatment records to verify compliance with project and standard requirements.

3. التفتيش الأبعاد

يتحقق فحص الأبعاد من القطر الخارجي, سماكة, دائرة الترباس, قطر ثقب الترباس, flange facing dimensions and thread accuracy against the required standard. Sealing face finish and concentricity are also verified to support leak-tight assembly. This inspection ensures interchangeability with mating components in ASME, EN, DIN, أنظمة الأنابيب JIS أو GB.

4. اختبار PMI والاختبار الهيدروستاتيكي

PMI testing is used to confirm the alloy grade of each flange or production lot before shipment, which is especially important for duplex and super duplex materials. Hydrostatic or pressure-related verification can be arranged according to project scope and applicable standards. SASA FLANGE كما يوفر EN 10204 3.1 شهادة, heat number traceability and supporting inspection documents.

تغليف المنتج

  • ✓تغليف علبة خشبية: مناسبة للمنتجات ذات الضغط العالي والقطر الكبير
  • ✓التعبئة البليت مع التفاف يتقلص: مناسبة للشحنات الدفعية والأحجام القياسية
  • ✓طلاء زيت مضاد للصدأ + ورق مقاوم للماء: تستخدم لحماية الشحن البحري
  • ✓كيس من البلاستيك الفردي + كرتون: تستخدم للتجهيزات الصغيرة والمنتجات المترابطة
  • ✓وضع علامات واضحة: درجة, مقاس, فئة الضغط, رقم الحرارة ورقم أمر الشراء

التطبيقات

Duplex and super duplex steel threaded flanges are used in corrosive and chloride-containing environments where high strength and excellent resistance to pitting, crevice corrosion and stress corrosion cracking are required. They are selected for welded-free installation in maintenance-sensitive systems, compact skids and threaded branch connections across demanding industrial sectors.

صناعة التطبيقات النموذجية لماذا يتم استخدام هذا المنتج
النفط والغاز Wellhead utility lines, chemical injection, firewater and process piping High strength and strong resistance to chlorides and sour service environments
المعالجة الكيميائية Corrosive media transfer lines, reactors and dosing systems Good resistance to aggressive chemicals and reduced risk of stress corrosion cracking
توليد الطاقة مياه التبريد, auxiliary piping and desulfurization systems Reliable pressure performance with long service life in wet corrosive conditions
معالجة المياه زلاقات تحلية المياه, seawater intake and brine handling systems Excellent seawater corrosion resistance and durable threaded assembly
البحرية والبحرية أنابيب مياه البحر, ballast systems and offshore utility modules Suitable for saltwater exposure, compact assemblies and maintenance-intensive locations

لماذا تختار SASA FLANGE?

  • ✓الشركة المصنعة المهنية للحافات الملولبة للمشاريع الصناعية العالمية
  • ✓حجم مخصص, فئة الضغط ودرجة المواد وفقا للرسومات
  • ✓الدعم القياسي الكامل: ASME, EN, DIN, JIS, غيغابايت, GOST ومواصفات العملاء
  • ✓إمكانية تتبع المواد مع التحكم في رقم الحرارة و EN 10204 3.1 شهادة المواد
  • ✓التحليل الكيميائي, الاختبار الميكانيكي, اختبار مؤشر مديري المشتريات (PMI)., التفتيش الهيدروستاتيكي والأبعاد
  • ✓توافر المخزون للعناصر القياسية, مهلة 3-7 أيام; إنتاج مخصص 15-30 أيام
  • ✓التعبئة والتغليف للتصدير للبحر, النقل الجوي والبري
  • ✓15+ سنوات من الخبرة في التوريد 50+ البلدان في جميع أنحاء العالم

التعليمات

س: What is a duplex super duplex steel threaded flange?

أ: A duplex or super duplex steel threaded flange is a forged flange with an internally threaded bore used to connect threaded pipe without welding. It is designed for systems requiring corrosion resistance and high mechanical strength. These flanges are commonly used in offshore, chemical and water treatment piping where chloride resistance and easier field installation are important.

س: ما هي المواد المتوفرة للفلنجات الملولبة الفولاذية المزدوجة المزدوجة?

أ: SASA FLANGE commonly supplies threaded flanges in ASTM A182 F51, F53, درجات F55 وF60, مشتمل UNS S31803, S32205, S32750 وS32760. Equivalent EN and GB material designations can also be provided based on project requirements. Material selection depends on operating pressure, درجة حرارة, chloride concentration and corrosion allowance requirements.

س: ما هي فئة الضغط المدعومة?

أ: Duplex and super duplex threaded flanges are typically supplied in ASME Class 150, 300, 600, 900, 1500 و 2500, اعتمادا على الحجم ومعيار التصميم. PN-rated EN, DIN and GB versions can also be manufactured, usually from PN10 up to PN100. Final pressure rating should always be selected according to the applicable flange standard and service conditions.

س: يستطيع SASA FLANGE توريد أحجام مخصصة?

أ: نعم, SASA FLANGE can manufacture custom threaded flanges according to client drawings or special project specifications. نحن نؤيد الحفر المخصص, أبعاد غير قياسية, NPT or BSP threads, raised face or RTJ facing, and special duplex or super duplex grades. Customized marking, inspection scope and packaging can also be arranged for export and EPC procurement requirements.

س: ما هي الشهادة المقدمة?

أ: SASA FLANGE لوازم EN 10204 3.1 material certificate for duplex and super duplex threaded flanges, together with heat number traceability and standard inspection records. اعتمادا على النظام, we can also provide chemical analysis, تقارير الاختبار الميكانيكي, نتائج مؤشر مديري المشتريات, dimensional inspection documents and pressure or hydrostatic-related verification records to meet industrial project documentation requirements.

اتصل بنا

If you are looking for duplex super duplex steel threaded flanges or related custom flange products, يرجى الاتصال SASA FLANGE مع الحجم المطلوب الخاص بك, فئة الضغط, الصف المادي, معيار, المعالجة السطحية, متطلبات الكمية والتفتيش. سيقدم فريقنا حلولًا تقنية احترافية وعروض أسعار تنافسية في الداخل 24 ساعات.

  • 📧 البريد الإلكتروني: sales@sasaflange.com
  • 📱 واتساب: +86 13764965049
  • ☎️ هاتف: +86 21 52236361
  • 🌐 موقع الكتروني: www.sasaflange.com

اترك رسالتك

    أرسل مقاسك, مادة, المعيار والكمية. سوف نقوم بالرد داخل 24 ساعات.

    تحميل الصورة / رسم (خياري)

    مقبول: جبغ, PNG, ويب بي أو بي دي إف. الحد الأقصى لحجم الملف: 5 ميغابايت.