Why there is no single F91 maximum temperature

Flange ratings decrease as temperature changes, and each pressure class follows the material group assigned by the standard. The piping code may impose additional allowable-stress, creep-life, Zähigkeit, cyclic or service restrictions. Plant owners can also set limits that are more conservative than the published standard.

daher, a supplier should not approve a design from temperature alone. A technical enquiry needs design pressure, Auslegungstemperatur, Größe, Klasse, pipe wall, service, design code and required standard edition.

What makes Grade 91 different?

F91 is a modified 9Cr-1Mo steel strengthened through controlled composition and heat treatment. Its elevated-temperature properties depend on achieving and preserving the intended microstructure. Improper heat treatment or field welding can reduce performance even if PMI confirms chromium and molybdenum content.

Documentation should show the required heat-treatment route and mechanical results. Project controls frequently address hardness before welding, after PWHT and across repaired areas.

Pressure class and temperature must be checked together

ASME Class 150, 300, 600, 900, 1500 Und 2500 are rating designations, not fixed pressure values. A Class 600 F91 flange can have a different allowable pressure from another material at the same temperature, and its rating changes as temperature changes.

Use the exact table in the purchased standard. Do not design from an online summary table, a catalogue nominal value or a room-temperature pressure label.

What buyers should request from an F91 flange supplier

• Original or traceable ASTM A182 F91 material certificate
• Heat-treatment temperatures and mechanical-property results
• Hardness readings and test-location plan where required
• PMI method appropriate to the elements being verified
• Dimensional report, NDE records and heat-number marking
• Protected weld ends and sealing faces for export shipment

The flange certificate must be reviewed together with the approved welding procedure and the adjoining P91 material records.