ASTM A182 F91 高温配管システム用フランジ
直接の答え
アン ASTM A182 F91 flange does not have one universal “temperature range.” Its permitted pressure at temperature depends on the adopted ASME B16.5 edition, material group, flange class, governing piping code and project limits. F91 is intended for elevated-temperature Grade 91 システム, but both lower-temperature toughness and upper-temperature creep behaviour must be checked by the designer.
重要なポイント
- Never convert flange Class directly into psi without the material-specific pressure-temperature table.
- Chemical composition alone cannot prove that an F91 forging has the correct normalized-and-tempered condition.
- 学年 91 reliability depends heavily on welding, PWHT and hardness control across the complete joint.
Why there is no single F91 maximum temperature
Flange ratings decrease as temperature changes, and each pressure class follows the material group assigned by the standard. The piping code may impose additional allowable-stress, creep-life, 靭性, cyclic or service restrictions. Plant owners can also set limits that are more conservative than the published standard.
したがって, a supplier should not approve a design from temperature alone. A technical enquiry needs design pressure, 設計温度, サイズ, クラス, pipe wall, サービス, design code and required standard edition.
What makes Grade 91 different?
F91 is a modified 9Cr-1Mo steel strengthened through controlled composition and heat treatment. Its elevated-temperature properties depend on achieving and preserving the intended microstructure. Improper heat treatment or field welding can reduce performance even if PMI confirms chromium and molybdenum content.
Documentation should show the required heat-treatment route and mechanical results. Project controls frequently address hardness before welding, after PWHT and across repaired areas.
Pressure class and temperature must be checked together
ASMEクラス 150, 300, 600, 900, 1500 そして 2500 are rating designations, not fixed pressure values. A Class 600 F91 flange can have a different allowable pressure from another material at the same temperature, and its rating changes as temperature changes.
Use the exact table in the purchased standard. Do not design from an online summary table, a catalogue nominal value or a room-temperature pressure label.
What buyers should request from an F91 flange supplier
- Original or traceable ASTM A182 F91 material certificate
- Heat-treatment temperatures and mechanical-property results
- Hardness readings and test-location plan where required
- PMI method appropriate to the elements being verified
- Dimensional report, NDE records and heat-number marking
- Protected weld ends and sealing faces for export shipment
The flange certificate must be reviewed together with the approved welding procedure and the adjoining P91 material records.
よくある質問
Can a supplier state an exact F91 maximum temperature?
A supplier can identify published rating data for a stated standard edition, サイズとクラス, but the project engineer must approve the actual design limit under the governing code.
Does PMI confirm correct F91 heat treatment?
いいえ. PMI identifies alloy chemistry. 熱処理記録, 機械的試験, hardness and—where required—additional metallurgical examination address material condition.
Why is PWHT important for an F91 joint?
A qualified PWHT cycle helps establish the required weld and heat-affected-zone condition. Incorrect temperature, hold time or heating control can create unacceptable properties.
参照される主な規格
発注書で指定されたエディションを常に確認し、設計と承認に関する完全に管理された基準を取得してください。.
合金鋼フランジの見積もりをリクエストする
材料グレードを送信します, 標準, NPS, 圧力クラス, フランジタイプ, 直面している, パイプスケジュール, 数量と検査要件. SASA FLANGE 見積もりの前に技術的な説明を確認します.
関連投稿
