Beschreibung
Produktdetails
Hastelloy threaded flanges are forged or machined flanges with female pipe threads that connect directly to threaded pipe without welding. They are widely used in corrosive chemical lines, Säurehandhabungssysteme, Instrumentierungsanschlüsse, small-bore process piping and maintenance-sensitive plants where hot work should be minimized. Key advantages include excellent corrosion resistance, reliable assembly, easy replacement and suitability for moderate to high pressure service depending on design standard.
SASA FLANGE supplies Hastelloy threaded flanges in standard and customized sizes with precision machining for NPT, BSPT or BSPP threads. Jede Bestellung kann durch eine chemische Analyse unterstützt werden, mechanische Prüfung, Maßprüfung, PMI-Tests, EN 10204 3.1 Zertifikat und vollständige Rückverfolgbarkeit der Herdnummer. Kundenspezifisches Bohren, gegenüber, special marking and project documentation are available for international industrial buyers.
- ✓Produktname: Hastelloy-Gewindeflansche
- ✓Materialqualität: Hastelloy C276, C22, B2, B3
- ✓Produkttyp: Geschmiedete Gewindeflansche / Schraubflansche
- ✓Hauptmerkmal: Outstanding corrosion resistance with non-welded threaded connection
- ✓Anwendungen: Chemische Verarbeitung, Off-Shore-, Wäschersysteme, Kraftwerke, water treatment and instrumentation piping
Produktparameter
| Produktname | Hastelloy-Gewindeflansche |
| Materialqualität | Hastelloy C276, Hastelloy C22, Hastelloy B2, Hastelloy B3, UNS N10276, UNS N06022, UNS N10665, UNS N10675 |
| Materialtyp | Korrosionsbeständige Legierung auf Nickelbasis |
| Produktform | Geschmiedeter und CNC-gefräster Gewindeflansch |
| Größenbereich | DN15 – DN600 (1/2 Zoll – 24 Zoll) |
| Druckklasse | Klasse 150 – 2500 / PN10 – PN100 |
| Dichtfläche | RF, FF, RTJ |
| Oberflächenbehandlung | Beizen, Passivierung, Bearbeitete Oberfläche, Schutzöl auf bearbeiteten Oberflächen |
| Standard | ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, GB/T 9119 oder Kundenspezifikation |
| Inspektion | Chemische Analyse, Mechanischer Test, PMI-Test, Dimensional, Hydrostatisch |
| Zertifikat | EN 10204 3.1 Materialzertifikat verfügbar |
| Bearbeitungsservice | Schneiden, CNC-Bearbeitung, Kundenspezifisches Bohren, Verarbeitung kundenspezifischer Größen |
Chemische Zusammensetzung
The chemical composition below is for reference for a typical Hastelloy C276 threaded flange material. Final composition shall conform to the applicable ASTM or ASME alloy specification, purchase order requirements and the mill test certificate. Exact values may vary slightly by heat, forging practice and product form while remaining within standard limits.
| Element | C | Und | Mn | P | S | Cr | In | Mo | Andere |
|---|---|---|---|---|---|---|---|---|---|
| Hastelloy C276 | 0.01 max | 0.08 max | 1.00 max | 0.04 max | 0.03 max | 14.5-16.5 | Gleichgewicht | 15.0-17.0 | Fe 4.0-7.0, W 3.0-4.5, Co 2.5 max, V 0.35 max |
Mechanische Eigenschaften
Mechanical properties shown are typical minimum room-temperature values for common Hastelloy grades used in threaded flanges. Actual results may vary according to alloy grade, Wärmebehandlungsbedingung, section thickness and forging process. Wo erforderlich, SASA FLANGE can provide supporting test reports and MTC data for supplied material lots.
| Grad | Zugfestigkeit | Streckgrenze | Verlängerung | Härte | Dichte |
|---|---|---|---|---|---|
| Hastelloy C276 | 690 MPa min | 283 MPa min | 40% min | 100 HRB max | 8.89 g/cm3 |
| Hastelloy C22 | 690 MPa min | 310 MPa min | 45% min | 95 HRB max | 8.69 g/cm3 |
Gemeinsame Größentabelle
| Größenbereich | Druckklasse | Dichtfläche | Material | Verfügbarkeit |
|---|---|---|---|---|
| DN15 – DN50 | Klasse 150 – 600 | RF | Hastelloy C276 / C22 | Aktie / Produktion |
| DN65 – DN300 | Klasse 150 – 1500 | RF / RTJ | Hastelloy C276 / C22 | Aktie / Produktion |
| DN350 – DN600 | Klasse 150 – 2500 | RF / RTJ | Hastelloy C276 / B3 | Produktion |
| DN700 – DN1500 | Klasse 150 – 900 | RF | Hastelloy C276 / C22 | Auf Bestellung gefertigt |
Vergleich verschiedener Spezifikationen
| Typ | Beschreibung | Typische Verwendung |
|---|---|---|
| ASME-Gewindeflansch | Female threaded flange manufactured to ASME B16.5 dimensions with NPT threads | Öl und Gas, Chemieanlagen, skid piping and maintenance-friendly systems |
| DE Gewindeflansch | Internally threaded flange produced to EN 1092-1 dimensions with customer-specified thread form | Europäische Prozessrohrleitungen, utility systems and retrofit projects |
| Erhöhter Flansch mit Gewinde | Threaded flange with raised face gasket seating area for standard spiral wound or soft gaskets | General corrosive service and moderate to high pressure lines |
| RTJ-Gewindeflansch | Threaded flange with ring type joint groove for high-integrity metallic sealing | High-pressure hydrocarbon and critical chemical service |
Äquivalente Standards und internationale Namen
Threaded flange dimensions can be manufactured to multiple international standards, while the alloy grade is generally supplied to ASTM or ASME nickel alloy specifications. Equivalent grade naming may vary by region, Aber SASA FLANGE verifies chemical composition, mechanical properties and traceability to ensure the supplied Hastelloy material matches project and end-user requirements.
| Standard / Region | Standardcode | Typische Note / Äquivalent |
|---|---|---|
| USA | ASME B16.5 | Hastelloy C276 / UNS N10276 Gewindeflansch |
| Europa | EN 1092-1 | 2.4819 alloy flange to EN dimensions |
| Deutschland | DIN 2527 / 2566 | NiMo16Cr15W alloy equivalent dimensional execution |
| Japan | JIS B2220 | Hastelloy C276 equivalent alloy flange to JIS drilling |
| China | GB/T 9119 | NS3304 / UNS N10276 equivalent flange dimensions |
Ablauf des Produktionsprozesses
Manufacturing control is essential for Hastelloy threaded flanges because nickel alloy machining, thread accuracy and sealing face quality directly affect service performance in corrosive applications. SASA FLANGE manages each stage from raw material verification to final packing.
- 1. Rohstoffauswahl
- 2. Schmieden / Schneiden
- 3. Wärmebehandlung
- 4. Grobbearbeitung
- 5. Fertigbearbeitung
- 6. Bohren
- 7. Oberflächenbehandlung
- 8. Inspektion
- 9. Markierung
- 10. Verpackung
- 11. Lieferung
| Prozessschritt | Beschreibung | Qualitätskontrollpunkt |
|---|---|---|
| Rohstoff | Wählen Sie zertifizierte Schmiedeknüppel oder -platten | Materialzertifikat und Rückverfolgbarkeit |
| Schmieden | Warmschmieden, um die gewünschte Form zu erreichen | Schmiedetemperatur und Reduktionsverhältnis |
| Wärmebehandlung | Solution annealing or stress-relief as applicable | Temperatur- und Haltezeitkontrolle |
| Bearbeitung | Dichtfläche, Schraubenlöcher, Gewinde und Abmessungen | Maßhaltigkeit, Gewindestärke und Oberflächenbeschaffenheit |
| Inspektion | Endkontrolle vor dem Versand | Dimension, Oberfläche, PMI, hydrostatisch |
Produktinspektion
1. Inspektion der chemischen Zusammensetzung
Chemical composition inspection verifies that the nickel alloy flange matches the specified Hastelloy grade such as C276 or C22. Samples are checked by spectrometer or laboratory analysis for key elements including nickel, Chrom, Molybdän, tungsten and iron. This confirms compliance with applicable alloy standards and supports reliable corrosion performance in aggressive service conditions.
2. Prüfung der mechanischen Eigenschaften
Mechanical testing confirms that supplied Hastelloy flange material meets required tensile strength, Streckgrenze, Dehnungs- und Härtewerte. Testing is performed according to relevant ASTM or ASME requirements using representative material from the production lot. These checks help ensure the flange can withstand assembly loads, pressure service and operating stresses in demanding industrial environments.
3. Maßprüfung
Die Maßprüfung erstreckt sich auf den Außendurchmesser, Dicke, ggf. Nabenprofil, Lochkreis, Schraubenlochgröße, face finish and thread accuracy. Für Gewindeflansche, thread form and depth are checked using calibrated gauges to ensure proper fit-up with mating pipe. Precise inspection helps avoid leakage, alignment problems and installation delays at the project site.
4. PMI-Tests und hydrostatische Tests
PMI testing is carried out to confirm the supplied flanges are the correct Hastelloy alloy and not mixed with stainless steel or other nickel materials. Hydrostatic or pressure-related verification can be arranged according to project scope and applicable standards. SASA FLANGE bietet EN 10204 3.1 Zertifikat, heat number traceability and supporting inspection records with shipment.
Produktverpackung
- ✓Holzkistenverpackung: Geeignet für Produkte mit hohem Druck und großem Durchmesser
- ✓Palettenverpackung mit Schrumpffolie: Geeignet für Sammelsendungen und Standardgrößen
- ✓Anti-Rost-Ölbeschichtung + Wasserfestes Papier: Wird zum Schutz von Seefracht verwendet
- ✓Einzelne Plastiktüte + Karton: Wird für kleine Fittings und Gewindeprodukte verwendet
- ✓Klare Markierung: Grad, Größe, Druckklasse, Laufnummer und Bestellnummer
Anwendungen
Hastelloy threaded flanges are selected for piping systems exposed to strong acids, Chloride, oxidizing media and mixed corrosive process streams. Their threaded design is useful where welding must be avoided, maintenance access is important or small-bore lines require practical assembly. They are widely used in process industries requiring corrosion resistance, traceability and dependable pressure sealing.
| Industrie | Typische Anwendungen | Warum dieses Produkt verwendet wird |
|---|---|---|
| Öl und Gas | Chemische Injektionsleitungen, sour service utility systems, Analysatoranschlüsse | Excellent corrosion resistance and threaded assembly for maintenance-friendly small bore piping |
| Chemische Verarbeitung | Säureübertragungsleitungen, Chlorierungsanlagen, Reaktorhilfsmittel, Wäschersysteme | Hastelloy resists aggressive chemicals, chlorides and oxidizing media better than many stainless steels |
| Stromerzeugung | REA-Systeme, flue gas cleaning, sampling and dosing lines | Good resistance to wet corrosive environments and reliable sealing in auxiliary process piping |
| Wasseraufbereitung | Chemical dosing systems, Entsalzungsanlagen, specialty media handling | Used where high-alloy corrosion resistance is required and welding is undesirable |
| Marine und Offshore | Offshore chemical service lines, seawater-related specialty systems, platform skids | Performs well in severe corrosive conditions and supports quick threaded installation or replacement |
Warum wählen? SASA FLANGE?
- ✓Professioneller Hersteller von Gewindeflanschen für globale Industrieprojekte
- ✓Maßgeschneiderte Größe, Druckklasse und Materialgüte gemäß Zeichnung
- ✓Vollständige Standardunterstützung: ASME, EN, DIN, JIS, GB, GOST- und Kundenspezifikationen
- ✓Materialrückverfolgbarkeit mit Schmelzenzahlkontrolle und EN 10204 3.1 Materialzertifikat
- ✓Chemische Analyse, mechanische Prüfung, PMI-Tests, Hydrostatische und Dimensionsprüfung
- ✓Lagerverfügbarkeit für Standardartikel, Vorlaufzeit 3-7 Tage; Sonderanfertigung 15-30 Tage
- ✓Exportverpackung für den Seeverkehr, Luft- und Landtransport
- ✓15+ Jahre Erfahrung in der Lieferung 50+ Länder weltweit
FAQ
Q: What is a Hastelloy threaded flange?
A: A Hastelloy threaded flange is a non-weld flange with internal pipe threads that allows connection to externally threaded pipe or fittings. It is commonly used in corrosive service, small-bore piping and installations where welding is restricted or undesirable. Typical materials include Hastelloy C276 and C22 for strong resistance to acids, chlorides and oxidizing chemicals.
Q: What materials are available for Hastelloy threaded flanges?
A: SASA FLANGE Normalerweise wird Hastelloy C276 geliefert, Hastelloy C22, Hastelloy B2 and Hastelloy B3 threaded flanges depending on media, temperature and project specification. Popular UNS designations include N10276 and N06022. Material selection depends on corrosion conditions such as reducing acids, oxidierende Chemikalien, chloride content and service temperature in the piping system.
Q: Welche Druckklasse wird unterstützt??
A: Hastelloy threaded flanges are typically supplied in ASME Class 150, 300, 600, 900, 1500 Und 2500, with PN-rated versions available for EN and DIN systems. The practical pressure rating depends on flange standard, Größe, Legierungsgrad, thread design and operating temperature. SASA FLANGE can recommend a suitable class according to service conditions and code requirements.
Q: Kann SASA FLANGE liefern kundenspezifische Größen?
A: Ja. SASA FLANGE can supply custom threaded flanges with special drilling, nicht standardmäßige Dicke, erhabenes Gesicht oder RTJ-Gesicht, und Gewindeformen einschließlich NPT, BSPT and BSPP. Customized dimensions can be produced according to drawings, mating equipment data or project specifications. Special alloy grades, marking requirements and documentation packages are also available upon request.
Q: Welches Zertifikat wird bereitgestellt??
A: SASA FLANGE bietet EN 10204 3.1 material certificate with heat number traceability for Hastelloy threaded flanges. Abhängig von den Bestellanforderungen, documentation can include mill test certificate, PMI-Bericht, Maßkontrollbericht, chemical analysis and mechanical test results. Additional third-party inspection and project-specific records can also be arranged before shipment when required.
Kontaktieren Sie uns
If you are looking for hastelloy threaded flanges or related custom flange products, Bitte kontaktieren Sie uns SASA FLANGE mit Ihrer gewünschten Größe, Druckklasse, Materialqualität, Standard, Oberflächenbehandlung, Mengen- und Prüfanforderungen. Unser Team bietet professionelle technische Lösungen und wettbewerbsfähige Angebote 24 Std..
- 📧 E-Mail: sales@sasaflange.com
- 📱 WhatsApp: +86 13764965049
- ☎️Tel: +86 21 52236361
- 🌐 Website: www.sasaflange.com













