คำอธิบาย
รายละเอียดสินค้า
Hastelloy threaded flanges are forged or machined flanges with female pipe threads that connect directly to threaded pipe without welding. They are widely used in corrosive chemical lines, ระบบการจัดการกรด, การเชื่อมต่อเครื่องมือวัด, small-bore process piping and maintenance-sensitive plants where hot work should be minimized. Key advantages include excellent corrosion resistance, reliable assembly, easy replacement and suitability for moderate to high pressure service depending on design standard.
SASA FLANGE supplies Hastelloy threaded flanges in standard and customized sizes with precision machining for NPT, BSPT or BSPP threads. แต่ละคำสั่งซื้อสามารถรองรับการวิเคราะห์ทางเคมีได้, การทดสอบทางกล, การตรวจสอบมิติ, การทดสอบ PMI, EN 10204 3.1 ใบรับรองและการตรวจสอบย้อนกลับหมายเลขความร้อนเต็มรูปแบบ. การเจาะแบบกำหนดเอง, หันหน้าไปทาง, special marking and project documentation are available for international industrial buyers.
- ✓ชื่อสินค้า: หน้าแปลนเกลียว Hastelloy
- ✓เกรดวัสดุ: ฮาสเตลลอย C276, ค22, บี2, B3
- ✓ประเภทสินค้า: Forged Threaded Flanges / หน้าแปลนแบบเกลียว
- ✓คุณสมบัติหลัก: Outstanding corrosion resistance with non-welded threaded connection
- ✓การใช้งาน: การแปรรูปทางเคมี, นอกชายฝั่ง, ระบบเครื่องฟอก, โรงไฟฟ้า, water treatment and instrumentation piping
พารามิเตอร์ผลิตภัณฑ์
| ชื่อสินค้า | หน้าแปลนเกลียว Hastelloy |
| เกรดวัสดุ | ฮาสเตลลอย C276, ฮาสเตลลอย C22, ฮาสเตลลอย บี2, ฮาสเตลลอย บี3, UNS N10276, UNS N06022, UNS N10665, UNS N10675 |
| ประเภทวัสดุ | โลหะผสมที่ทนต่อการกัดกร่อนจากนิกเกิล |
| แบบฟอร์มสินค้า | หน้าแปลนเกลียวกลึงและกลึง CNC |
| ช่วงขนาด | DN15 – DN600 (1/2 นิ้ว – 24 นิ้ว) |
| คลาสความดัน | ระดับ 150 – 2500 / PN10 – PN100 |
| ซีลหน้า | รฟ, เอฟเอฟ, RTJ |
| การรักษาพื้นผิว | การดอง, ทู่, เสร็จสิ้นการกลึง, น้ำมันป้องกันบนพื้นผิวเครื่องจักร |
| มาตรฐาน | ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, กิกะไบต์/ที 9119 หรือข้อกำหนดของลูกค้า |
| การตรวจสอบ | การวิเคราะห์ทางเคมี, การทดสอบทางกล, การทดสอบ PMI, มิติ, อุทกสถิต |
| ใบรับรอง | EN 10204 3.1 มีใบรับรองวัสดุ |
| บริการแปรรูป | การตัด, เครื่องจักรกลซีเอ็นซี, การเจาะแบบกำหนดเอง, การประมวลผลขนาดที่กำหนดเอง |
องค์ประกอบทางเคมี
The chemical composition below is for reference for a typical Hastelloy C276 threaded flange material. Final composition shall conform to the applicable ASTM or ASME alloy specification, purchase order requirements and the mill test certificate. Exact values may vary slightly by heat, forging practice and product form while remaining within standard limits.
| องค์ประกอบ | ค | และ | มน | ป | ส | Cr | ใน | โม | อื่น |
|---|---|---|---|---|---|---|---|---|---|
| ฮาสเตลลอย C276 | 0.01 สูงสุด | 0.08 สูงสุด | 1.00 สูงสุด | 0.04 สูงสุด | 0.03 สูงสุด | 14.5-16.5 | สมดุล | 15.0-17.0 | เฟ 4.0-7.0, ว 3.0-4.5, บริษัท 2.5 สูงสุด, วี 0.35 สูงสุด |
คุณสมบัติทางกล
Mechanical properties shown are typical minimum room-temperature values for common Hastelloy grades used in threaded flanges. Actual results may vary according to alloy grade, สภาวะการรักษาความร้อน, ความหนาของส่วนและกระบวนการตีขึ้นรูป. ในกรณีที่จำเป็น, SASA FLANGE can provide supporting test reports and MTC data for supplied material lots.
| ระดับ | ความต้านแรงดึง | ความแข็งแรงของผลผลิต | การยืดตัว | ความแข็ง | ความหนาแน่น |
|---|---|---|---|---|---|
| ฮาสเตลลอย C276 | 690 MPa ขั้นต่ำ | 283 MPa ขั้นต่ำ | 40% นาที | 100 HRB สูงสุด | 8.89 กรัม/ซม3 |
| ฮาสเตลลอย C22 | 690 MPa ขั้นต่ำ | 310 MPa ขั้นต่ำ | 45% นาที | 95 HRB สูงสุด | 8.69 กรัม/ซม3 |
ตารางขนาดทั่วไป
| ช่วงขนาด | คลาสความดัน | ซีลหน้า | วัสดุ | ความพร้อมใช้งาน |
|---|---|---|---|---|
| DN15 – DN50 | ระดับ 150 – 600 | รฟ | ฮาสเตลลอย C276 / ค22 | คลังสินค้า / การผลิต |
| DN65 – DN300 | ระดับ 150 – 1500 | รฟ / RTJ | ฮาสเตลลอย C276 / ค22 | คลังสินค้า / การผลิต |
| DN350 – DN600 | ระดับ 150 – 2500 | รฟ / RTJ | ฮาสเตลลอย C276 / B3 | การผลิต |
| DN700 – DN1500 | ระดับ 150 – 900 | รฟ | ฮาสเตลลอย C276 / ค22 | สั่งทำ |
การเปรียบเทียบข้อมูลจำเพาะที่แตกต่างกัน
| พิมพ์ | คำอธิบาย | การใช้งานทั่วไป |
|---|---|---|
| หน้าแปลนเกลียว ASME | หน้าแปลนเกลียวในที่ผลิตขึ้นเพื่อ ASME B16.5 dimensions with NPT threads | น้ำมันและก๊าซ, โรงงานเคมี, skid piping and maintenance-friendly systems |
| EN หน้าแปลนเกลียว | Internally threaded flange produced to EN 1092-1 dimensions with customer-specified thread form | ท่อกระบวนการยุโรป, utility systems and retrofit projects |
| Raised Face Threaded Flange | Threaded flange with raised face gasket seating area for standard spiral wound or soft gaskets | General corrosive service and moderate to high pressure lines |
| หน้าแปลนเกลียว RTJ | Threaded flange with ring type joint groove for high-integrity metallic sealing | High-pressure hydrocarbon and critical chemical service |
มาตรฐานที่เทียบเท่าและชื่อสากล
Threaded flange dimensions can be manufactured to multiple international standards, while the alloy grade is generally supplied to ASTM or ASME nickel alloy specifications. Equivalent grade naming may vary by region, แต่ SASA FLANGE verifies chemical composition, mechanical properties and traceability to ensure the supplied Hastelloy material matches project and end-user requirements.
| มาตรฐาน / ภูมิภาค | รหัสมาตรฐาน | เกรดทั่วไป / เทียบเท่า |
|---|---|---|
| สหรัฐอเมริกา | ASME B16.5 | ฮาสเตลลอย C276 / UNS N10276 หน้าแปลนเกลียว |
| ยุโรป | EN 1092-1 | 2.4819 alloy flange to EN dimensions |
| เยอรมนี | DIN 2527 / 2566 | NiMo16Cr15W alloy equivalent dimensional execution |
| ญี่ปุ่น | JIS B2220 | Hastelloy C276 equivalent alloy flange to JIS drilling |
| จีน | กิกะไบต์/ที 9119 | NS3304 / UNS N10276 equivalent flange dimensions |
ผังกระบวนการผลิต
Manufacturing control is essential for Hastelloy threaded flanges because nickel alloy machining, thread accuracy and sealing face quality directly affect service performance in corrosive applications. SASA FLANGE manages each stage from raw material verification to final packing.
- 1. การคัดเลือกวัตถุดิบ
- 2. การตีขึ้นรูป / การตัด
- 3. การรักษาความร้อน
- 4. การกลึงหยาบ
- 5. เสร็จสิ้นการตัดเฉือน
- 6. การเจาะ
- 7. การรักษาพื้นผิว
- 8. การตรวจสอบ
- 9. การทำเครื่องหมาย
- 10. การบรรจุ
- 11. จัดส่ง
| ขั้นตอนกระบวนการ | คำอธิบาย | จุดควบคุมคุณภาพ |
|---|---|---|
| วัตถุดิบ | เลือกเหล็กแท่งหรือเพลทปลอมที่ผ่านการรับรอง | ใบรับรองวัสดุและการตรวจสอบย้อนกลับ |
| การตีขึ้นรูป | การตีขึ้นรูปร้อนเพื่อให้ได้รูปทรงที่ต้องการ | อุณหภูมิการตีและอัตราส่วนการลด |
| การรักษาความร้อน | Solution annealing or stress-relief as applicable | ควบคุมอุณหภูมิและเวลาในการถือครอง |
| เครื่องจักรกล | ซีลหน้า, รูสลักเกลียว, เธรดและขนาด | ความแม่นยำของมิติ, thread gauge and surface finish |
| การตรวจสอบ | การตรวจสอบขั้นสุดท้ายก่อนจัดส่ง | มิติ, พื้นผิว, พีเอ็มไอ, อุทกสถิต |
การตรวจสอบผลิตภัณฑ์
1. การตรวจสอบองค์ประกอบทางเคมี
Chemical composition inspection verifies that the nickel alloy flange matches the specified Hastelloy grade such as C276 or C22. Samples are checked by spectrometer or laboratory analysis for key elements including nickel, โครเมียม, โมลิบดีนัม, tungsten and iron. This confirms compliance with applicable alloy standards and supports reliable corrosion performance in aggressive service conditions.
2. การทดสอบคุณสมบัติทางกล
Mechanical testing confirms that supplied Hastelloy flange material meets required tensile strength, ความแข็งแรงของผลผลิต, ค่าการยืดตัวและความแข็ง. Testing is performed according to relevant ASTM or ASME requirements using representative material from the production lot. These checks help ensure the flange can withstand assembly loads, pressure service and operating stresses in demanding industrial environments.
3. การตรวจสอบมิติ
การตรวจสอบขนาดครอบคลุมเส้นผ่านศูนย์กลางภายนอก, ความหนา, โปรไฟล์ฮับ หากมี, วงกลมสายฟ้า, ขนาดรูสลักเกลียว, face finish and thread accuracy. สำหรับหน้าแปลนเกลียว, thread form and depth are checked using calibrated gauges to ensure proper fit-up with mating pipe. Precise inspection helps avoid leakage, alignment problems and installation delays at the project site.
4. การทดสอบ PMI และการทดสอบอุทกสถิต
PMI testing is carried out to confirm the supplied flanges are the correct Hastelloy alloy and not mixed with stainless steel or other nickel materials. สามารถจัดเตรียมการตรวจสอบอุทกสถิตหรือที่เกี่ยวข้องกับแรงดันได้ตามขอบเขตของโครงการและมาตรฐานที่บังคับใช้. SASA FLANGE จัดเตรียมให้ EN 10204 3.1 ใบรับรอง, heat number traceability and supporting inspection records with shipment.
บรรจุภัณฑ์สินค้า
- ✓บรรจุภัณฑ์กล่องไม้: เหมาะสำหรับผลิตภัณฑ์ที่มีแรงดันสูงและมีเส้นผ่านศูนย์กลางขนาดใหญ่
- ✓การบรรจุพาเลทด้วยฟิล์มหด: เหมาะสำหรับการจัดส่งเป็นชุดและขนาดมาตรฐาน
- ✓เคลือบน้ำมันป้องกันสนิม + กระดาษกันน้ำ: ใช้สำหรับการป้องกันการขนส่งทางทะเล
- ✓ถุงพลาสติกส่วนบุคคล + กล่องกระดาษ: ใช้สำหรับอุปกรณ์ขนาดเล็กและผลิตภัณฑ์เกลียว
- ✓ล้างเครื่องหมาย: ระดับ, ขนาด, ระดับความดัน, หมายเลขความร้อนและหมายเลข PO
การใช้งาน
Hastelloy threaded flanges are selected for piping systems exposed to strong acids, คลอไรด์, oxidizing media and mixed corrosive process streams. Their threaded design is useful where welding must be avoided, maintenance access is important or small-bore lines require practical assembly. They are widely used in process industries requiring corrosion resistance, traceability and dependable pressure sealing.
| อุตสาหกรรม | การใช้งานทั่วไป | เหตุใดจึงใช้ผลิตภัณฑ์นี้ |
|---|---|---|
| น้ำมันและก๊าซ | สายฉีดสารเคมี, sour service utility systems, การเชื่อมต่อเครื่องวิเคราะห์ | Excellent corrosion resistance and threaded assembly for maintenance-friendly small bore piping |
| การแปรรูปทางเคมี | เส้นถ่ายโอนกรด, หน่วยคลอรีน, ตัวช่วยเครื่องปฏิกรณ์, ระบบเครื่องฟอก | Hastelloy resists aggressive chemicals, chlorides and oxidizing media better than many stainless steels |
| การผลิตไฟฟ้า | ระบบเอฟจีดี, flue gas cleaning, sampling and dosing lines | Good resistance to wet corrosive environments and reliable sealing in auxiliary process piping |
| การบำบัดน้ำ | Chemical dosing systems, desalination skids, specialty media handling | Used where high-alloy corrosion resistance is required and welding is undesirable |
| ทะเลและนอกชายฝั่ง | Offshore chemical service lines, seawater-related specialty systems, platform skids | Performs well in severe corrosive conditions and supports quick threaded installation or replacement |
ทำไมต้องเลือก SASA FLANGE?
- ✓ผู้ผลิตมืออาชีพของหน้าแปลนเกลียวสำหรับโครงการอุตสาหกรรมระดับโลก
- ✓ขนาดที่กำหนดเอง, ระดับความดันและเกรดวัสดุตามแบบ
- ✓การสนับสนุนมาตรฐานเต็มรูปแบบ: ASME, EN, DIN, JIS, กิกะไบต์, GOST และข้อกำหนดของลูกค้า
- ✓การตรวจสอบย้อนกลับของวัสดุด้วยการควบคุมจำนวนความร้อนและ EN 10204 3.1 ใบรับรองวัสดุ
- ✓การวิเคราะห์ทางเคมี, การทดสอบทางกล, การทดสอบ PMI, การตรวจสอบอุทกสถิตและมิติ
- ✓ความพร้อมในสต็อกสำหรับสินค้ามาตรฐาน, เวลานำ 3-7 วัน; การผลิตที่กำหนดเอง 15-30 วัน
- ✓บรรจุภัณฑ์เกรดส่งออกสำหรับทะเล, การขนส่งทางอากาศและทางบก
- ✓15+ ประสบการณ์หลายปีในการจัดหา 50+ ประเทศทั่วโลก
คำถามที่พบบ่อย
ถาม: What is a Hastelloy threaded flange?
ก: A Hastelloy threaded flange is a non-weld flange with internal pipe threads that allows connection to externally threaded pipe or fittings. It is commonly used in corrosive service, small-bore piping and installations where welding is restricted or undesirable. Typical materials include Hastelloy C276 and C22 for strong resistance to acids, chlorides and oxidizing chemicals.
ถาม: What materials are available for Hastelloy threaded flanges?
ก: SASA FLANGE โดยทั่วไปจะจัดหา Hastelloy C276, ฮาสเตลลอย C22, Hastelloy B2 and Hastelloy B3 threaded flanges depending on media, temperature and project specification. Popular UNS designations include N10276 and N06022. Material selection depends on corrosion conditions such as reducing acids, สารเคมีออกซิไดซ์, chloride content and service temperature in the piping system.
ถาม: รองรับคลาสแรงดันใด?
ก: Hastelloy threaded flanges are typically supplied in ASME Class 150, 300, 600, 900, 1500 และ 2500, with PN-rated versions available for EN and DIN systems. The practical pressure rating depends on flange standard, ขนาด, เกรดโลหะผสม, thread design and operating temperature. SASA FLANGE can recommend a suitable class according to service conditions and code requirements.
ถาม: สามารถ SASA FLANGE จัดหาขนาดที่กำหนดเอง?
ก: ใช่. SASA FLANGE can supply custom threaded flanges with special drilling, ความหนาที่ไม่ได้มาตรฐาน, ยกหน้าหรือหันหน้า RTJ, และรูปแบบเธรดรวมถึง NPT, BSPT and BSPP. Customized dimensions can be produced according to drawings, mating equipment data or project specifications. Special alloy grades, marking requirements and documentation packages are also available upon request.
ถาม: มีใบรับรองอะไรบ้าง?
ก: SASA FLANGE จัดเตรียมให้ EN 10204 3.1 material certificate with heat number traceability for Hastelloy threaded flanges. ขึ้นอยู่กับข้อกำหนดในการสั่งซื้อ, documentation can include mill test certificate, รายงานพีเอ็มไอ, รายงานการตรวจสอบมิติ, chemical analysis and mechanical test results. Additional third-party inspection and project-specific records can also be arranged before shipment when required.
ติดต่อเรา
If you are looking for hastelloy threaded flanges or related custom flange products, กรุณาติดต่อ SASA FLANGE ด้วยขนาดที่คุณต้องการ, ระดับความดัน, เกรดวัสดุ, มาตรฐาน, การรักษาพื้นผิว, ข้อกำหนดด้านปริมาณและการตรวจสอบ. ทีมงานของเราจะจัดหาโซลูชั่นทางเทคนิคระดับมืออาชีพและเสนอราคาที่แข่งขันได้ภายใน 24 ชั่วโมง.
- 📧 อีเมล: sales@sasaflange.com
- 📱 วอตส์แอป: +86 13764965049
- ☎️โทร: +86 21 52236361
- 🌐 เว็บไซต์: www.sasaflange.com













