Flensa adalah komponen penting dalam sistem perpipaan yang menciptakan sambungan kedap bocor antar pipa, katup, pompa, dan peralatan lainnya. Namun, flange leakage remains a leading cause of equipment downtime, kehilangan produk, and safety hazards across industries such as oil and gas, pemrosesan kimia, pembangkit listrik, dan teknik kelautan.

Memahami root causes of flange leakage is critical to preventing failures, ensuring workplace safety, and maintaining system reliability. Dalam artikel ini, kami menjelajahi 7 most common causes of flange leakage, and how to avoid them with proper design, instalasi, dan praktik pemeliharaan.

---

1. Improper Gasket Installation

The gasket is the sealing element between two flange faces. Even if the flange and bolts are perfect, a poorly installed gasket can lead to leaks.

Penyebab:

• Gasket misalignment

• Uneven compression during bolt tightening

• Using the wrong size or material

• Menggunakan kembali gasket lama atau rusak

• Failure to center the gasket on the sealing surface

How to Prevent:

• Always use a new, membersihkan, and correct-sized gasket

• Center the gasket properly between flange faces

• Tighten bolts in a cross (bintang) pola untuk memastikan kompresi yang merata

• Follow manufacturer torque specifications

sasa lonjong supplies a wide range of flange-compatible gaskets, including spiral wound, PTFE, and graphite types for various pressure and temperature conditions.

---

2. Insufficient or Uneven Bolt Torque

One of the most frequent causes of flange leaks is incorrect bolt tightening. Both under-tightening and over-tightening can cause sealing issues.

Penyebab:

• Torque not applied evenly

• Bolts not lubricated properly

• Using incorrect bolt materials

• Torque wrench not calibrated

• Ignoring recommended torque sequence

How to Prevent:

• Menggunakan lubricated bolts and calibrated torque tools

• Tighten bolts in beberapa lintasan (30%, 60%, Kemudian 100% of torque)

• Follow the recommended cross-bolt tightening pattern

• Record torque values for traceability

Uneven or low bolt stress causes leaks, especially under thermal cycling. sasa lonjong recommends documented bolting procedures for high-integrity flange connections.

---

3. Flange Surface Damage

The integrity of a flange connection depends on the condition of the sealing surface. Even minor scratches or corrosion can compromise the seal.

Penyebab:

• Korosi, mengadu, or erosion on flange face

• Improper handling or transportation

• Over-torquing or using metal tools near sealing face

• Incompatible gasket material

How to Prevent:

• Inspect flange faces for damage before installation

• Use protective covers during storage and transport

• Use gaskets that match the surface finish and pressure class

• Re-machine or replace damaged flanges as needed

Untuk aplikasi kritis, sasa lonjong offers high-precision machined flanges with serrated or smooth finishes according to ASME B16.5 atau standar DIN.

---

4. Misalignment Between Flanges

Flanges must be properly aligned both axially and angularly to create an even seal. Misalignment leads to stress on bolts, distortion of flanges, and gasket damage.

Penyebab:

• Improper pipe support or anchoring

• Inaccurate pipe cutting or welding

• Misjudged expansion allowances

• Forcing flange connection during assembly

How to Prevent:

• Menggunakan alignment tools before tightening

• Avoid forcing connections—adjust piping supports instead

• Allow for thermal expansion in piping design

• Verify alignment with feeler gauges or dial indicators

Misalignment not only causes leaks but can also lead to flange cracking over time.

---

5. Siklus Termal dan Getaran

Many industrial systems experience temperature fluctuations and mechanical vibrations, which cause movement, loosening of bolts, and loss of gasket compression over time.

Penyebab:

• High/low temperature cycling

• Thermal expansion of pipe materials

• Vibration from pumps, compressors, or external forces

• Lack of periodic bolt re-torquing

How to Prevent:

• Menggunakan spring washers atau live-loading systems for dynamic bolt load

• Memilih bahan paking that resist thermal degradation

• Design piping systems with expansion joints atau flexible couplings

• Regularly inspect and re-torque bolts during shutdowns

sasa lonjong can recommend flange and gasket materials designed to withstand thermal cycling in chemical and high-temperature services.

---

6. Using the Wrong Gasket or Flange Material

Each application has specific requirements based on fluid type, tekanan, suhu, and corrosion exposure. Using incompatible materials can lead to serangan kimia, orang aneh, or gasket blowout.

Penyebab:

• Selecting low-grade gaskets for high-pressure service

• Using carbon steel flanges in corrosive environments

• Gasket material not rated for temperature extremes

• Improper flange class for system pressure

How to Prevent:

• Match materials to process media and system conditions

• Consult material compatibility charts or request help from sasa lonjong

• Menggunakan metallic gaskets for high-pressure or high-temperature conditions

• Follow relevant standards such as ASME B16.5 atau EN 1092-1

Correct material selection reduces the risk of premature failure and ensures system longevity.

---

7. Lack of Maintenance and Inspection

Even the best-installed flange can leak over time without routine inspection and preventive maintenance.

Penyebab:

• Gasket aging and compression loss

• Bolt loosening due to vibration

• Corrosion or chemical attack

• Overlooked early warning signs like slight leakage or discoloration

How to Prevent:

• Implement a scheduled inspection plan

• Monitor for leaks, karat, or gasket extrusion

• Re-torque bolts at defined intervals, especially after startup

• Replace gaskets during shutdowns or maintenance cycles

Flange connections are not “install-and-forget” components. Regular maintenance ensures system integrity.

---

Ringkasan: 7 Causes of Flange Leakage