หน้าแปลนเป็นส่วนประกอบสำคัญในระบบท่อที่สร้างการเชื่อมต่อที่กันรั่วระหว่างท่อ, วาล์ว, ปั๊ม, และอุปกรณ์อื่นๆ. อย่างไรก็ตาม, flange leakage remains a leading cause of equipment downtime, การสูญเสียผลิตภัณฑ์, and safety hazards across industries such as oil and gas, การแปรรูปทางเคมี, การผลิตกระแสไฟฟ้า, และวิศวกรรมทางทะเล.

ทำความเข้าใจกับ root causes of flange leakage is critical to preventing failures, ensuring workplace safety, and maintaining system reliability. ในบทความนี้, we explore the 7 most common causes of flange leakage, and how to avoid them with proper design, การติดตั้ง, and maintenance practices.

---

1. Improper Gasket Installation

The gasket is the sealing element between two flange faces. Even if the flange and bolts are perfect, a poorly installed gasket can lead to leaks.

สาเหตุ:

• Gasket misalignment

• Uneven compression during bolt tightening

• Using the wrong size or material

• นำปะเก็นเก่าหรือชำรุดกลับมาใช้ใหม่

• Failure to center the gasket on the sealing surface

How to Prevent:

• ใช้ก.เสมอ new, ทำความสะอาด, and correct-sized gasket

• Center the gasket properly between flange faces

• ขันสลักเกลียวให้แน่นใน cross (ดาว) ลวดลาย เพื่อให้แน่ใจว่ามีการบีบอัดสม่ำเสมอ

• Follow manufacturer torque specifications

ซาซ่าเป็นรูปสี่เหลี่ยมผืนผ้า supplies a wide range of flange-compatible gaskets, including spiral wound, ไฟเบอร์, and graphite types for various pressure and temperature conditions.

---

2. Insufficient or Uneven Bolt Torque

One of the most frequent causes of flange leaks is incorrect bolt tightening. Both under-tightening and over-tightening can cause sealing issues.

สาเหตุ:

• Torque not applied evenly

• Bolts not lubricated properly

• Using incorrect bolt materials

• Torque wrench not calibrated

• Ignoring recommended torque sequence

How to Prevent:

• ใช้ lubricated bolts and calibrated torque tools

• Tighten bolts in หลายรอบ (30%, 60%, แล้ว 100% of torque)

• Follow the recommended cross-bolt tightening pattern

• Record torque values for traceability

Uneven or low bolt stress causes leaks, especially under thermal cycling. ซาซ่าเป็นรูปสี่เหลี่ยมผืนผ้า recommends documented bolting procedures for high-integrity flange connections.

---

3. Flange Surface Damage

The integrity of a flange connection depends on the condition of the พื้นผิวปิดผนึก. Even minor scratches or corrosion can compromise the seal.

สาเหตุ:

• การกัดกร่อน, บ่อ, or erosion on flange face

• Improper handling or transportation

• Over-torquing or using metal tools near sealing face

• Incompatible gasket material

How to Prevent:

• Inspect flange faces for damage before installation

• Use protective covers during storage and transport

• Use gaskets that match the surface finish and pressure class

• Re-machine or replace damaged flanges as needed

สำหรับการใช้งานที่สำคัญ, ซาซ่าเป็นรูปสี่เหลี่ยมผืนผ้า offers high-precision machined flanges with serrated or smooth finishes according to ASME B16.5 หรือมาตรฐาน DIN.

---

4. Misalignment Between Flanges

Flanges must be properly aligned both axially and angularly to create an even seal. Misalignment leads to stress on bolts, distortion of flanges, and gasket damage.

สาเหตุ:

• Improper pipe support or anchoring

• Inaccurate pipe cutting or welding

• Misjudged expansion allowances

• Forcing flange connection during assembly

How to Prevent:

• ใช้ alignment tools before tightening

• Avoid forcing connections—adjust piping supports instead

• Allow for thermal expansion in piping design

• Verify alignment with feeler gauges or dial indicators

Misalignment not only causes leaks but can also lead to flange cracking over time.

---

5. การปั่นจักรยานด้วยความร้อนและการสั่นสะเทือน

Many industrial systems experience temperature fluctuations and mechanical vibrations, which cause movement, loosening of bolts, and loss of gasket compression over time.

สาเหตุ:

• High/low temperature cycling

• Thermal expansion of pipe materials

• Vibration from pumps, คอมเพรสเซอร์, or external forces

• Lack of periodic bolt re-torquing

How to Prevent:

• ใช้ spring washers หรือ live-loading systems for dynamic bolt load

• เลือก วัสดุปะเก็น that resist thermal degradation

• Design piping systems with expansion joints หรือ flexible couplings

• Regularly inspect and re-torque bolts during shutdowns

ซาซ่าเป็นรูปสี่เหลี่ยมผืนผ้า can recommend flange and gasket materials designed to withstand thermal cycling in chemical and high-temperature services.

---

6. Using the Wrong Gasket or Flange Material

Each application has specific requirements based on fluid type, ความดัน, อุณหภูมิ, and corrosion exposure. Using incompatible materials can lead to chemical attack, คืบคลาน, or gasket blowout.

สาเหตุ:

• Selecting low-grade gaskets for high-pressure service

• Using carbon steel flanges in corrosive environments

• Gasket material not rated for temperature extremes

• Improper flange class for system pressure

How to Prevent:

• Match materials to process media and system conditions

• Consult material compatibility charts or request help from ซาซ่าเป็นรูปสี่เหลี่ยมผืนผ้า

• ใช้ metallic gaskets for high-pressure or high-temperature conditions

• Follow relevant standards such as ASME B16.5 หรือภาษาอังกฤษ 1092-1

Correct material selection reduces the risk of premature failure and ensures system longevity.

---

7. Lack of Maintenance and Inspection

Even the best-installed flange can leak over time without routine inspection and preventive maintenance.

สาเหตุ:

• Gasket aging and compression loss

• Bolt loosening due to vibration

• Corrosion or chemical attack

• Overlooked early warning signs like slight leakage or discoloration

How to Prevent:

• Implement a scheduled inspection plan

• Monitor for leaks, สนิม, or gasket extrusion

• Re-torque bolts at defined intervals, especially after startup

• Replace gaskets during shutdowns or maintenance cycles

Flange connections are not “install-and-forget” components. Regular maintenance ensures system integrity.

---

สรุป: 7 Causes of Flange Leakage