Keterangan
Spesifikasi Produk dan Data Teknis
An extremely strong precipitation hardened stainless steel
- ✓Well suited for high strength applications
- ✓Up to 4x stronger than 316 baja tahan karat
- ✓Maintains its mechanical strength up to 600°F
- ✓17-4PH Chemistry & Spesifikasi
- ✓Fitur dan manfaat flensa berulir
17-4 PH threaded flanges are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. Compared to 316 baja tahan karat, 17-4 PH threaded flanges yield strength is up over 4 times greater. When compared to Duplex 2205 flensa berulir, the yield strength of 17-4 PH can be up to 2-½ times greater.
17-4 threaded flanges are available in 8 different aged (curah hujan mengeras) conditions offering a variety of mechanical properties (see below).
Tersedia Jenis Flange: Flensa Buta, Flensa Sambungan Putaran, Selipkan Flensa, Flensa Las Soket, Flensa Berulir, Flensa Leher Las
Referensi Dimensi Flange
17-4 Ph Slip on Flanges Built for Strength-Critical Service
SASA FLANGE persediaan 17 4 ph slip on flanges manufactured from precipitation hardened stainless steel recognized for exceptional strength and dependable mechanical performance.
This alloy is well suited for high strength applications and maintains its mechanical properties up to 600°F, supporting reliable service in demanding systems.
Dibandingkan dengan 316 baja tahan karat, 17-4 PH offers yield strength up over four times greater, making these flanges a premium choice for broad industrial use where durability and performance matter.
17-4 Ph Slip on Flanges with Grade 630 Precision Standards
Itu 17 4 ph slip on flanges from SASA FLANGE are produced in 17-4 PH precipitation hardened stainless steel to specifications including UNS S17400, AISI 630, ASTM A564-630, bahan 1.4542, AMS 5604 Sheet, Strip and Plate, ASTM A 693 Piring, Dan ASTM A564 GR 630.
Nilai 630 may be furnished in the solution-annealed or age-hardened condition, dengan 8 different aged conditions available.
The material can deliver yield strength up over four times greater than 316 and up to 2-½ times greater than Duplex 2205.
17-4 Ph Slip on Flanges Across Demanding Industrial Networks
17 4 ph slip on flanges are suitable for oil and gas processing lines requiring strong mechanical performance at temperatures up to 600°F.
Di pabrik kimia, they fit pilot processes where system configuration changes often and dependable joints are needed.
Power generation facilities benefit from the alloy’s high strength in critical piping.
Water treatment and marine installations can use them in services demanding durable stainless performance, especially where high strength is more important than conventional 316 kemampuan.
Secure 17-4 Ph Slip on Flanges Fast from SASA FLANGE
Memilih SASA FLANGE untuk 17 4 ph slip on flanges that combine exceptional strength, dependable elevated-temperature performance, and flexible supply.
Stock items ship in 3-7 hari, while custom orders typically require 15-30 hari.
Every order is supported by ISO 9001:2015 jaminan kualitas, MTC per EN 10204 3.1, pengujian PMI, and hydrostatic pressure testing.
For prompt pricing and technical assistance, hubungi sales@sasaflange.com atau WhatsApp +86 13764965049 to discuss your exact flange requirement.
Mengapa Memilih SASA FLANGE?
Kelas Tekanan BergandaSlip on flanges can be matched to project piping systems where high strength stainless performance is required. |
Toleransi Dimensi yang TepatProduced for consistent fit-up in piping assemblies, supporting dependable installation and alignment in industrial service. |
Tahan Korosi17-4 PH stainless steel provides strong mechanical performance with corrosion resistance for challenging process environments. |
ISO 9001 BersertifikatSASA FLANGE emphasizes controlled manufacturing and quality-focused production to support reliable industrial flange supply. |
Harga KompetitifKekuatan tinggi 17-4 PH flange solutions help customers balance performance requirements with long-term project value. |
Pengiriman GlobalWorldwide supply support helps industrial buyers source specialty stainless steel flanges for international projects. |
17 4 ph slip on flanges Application Scenario
Itu 17 4 ph slip on flanges is widely deployed across critical industrial sectors where reliable pipe sealing and pressure containment are essential. Skenario aplikasi yang umum meliputi:
Dari pipa kilang bertekanan tinggi hingga jaringan distribusi air kota, itu 17 4 ph slip on flanges ensures leak-free connections and long-term service reliability in demanding environments.
17 4 ph slip on flanges installed in industrial piping system
Pertanyaan yang Sering Diajukan
Q: Apa itu a 17 4 ph slip on flanges used for?
A: These slip-on flanges are used for piping systems that need high strength, ketahanan terhadap korosi, and good fatigue performance. Made from 17-4 PH stainless steel, they suit oil and gas, pemrosesan kimia, laut, luar angkasa, and power applications. They are selected where mechanical strength must be maintained up to 600°F and where easier alignment and welding of the flange to pipe are required during installation.
Q: What materials are available for 17 4 slip ph pada flensa?
A: Bahan standarnya adalah 17-4 Baja tahan karat yang dikeraskan dengan presipitasi PH, also identified as UNS S17400, AISI 630, Nilai 630, dan materi 1.4542. It is supplied to specifications including ASTM A564-630, ASTM A693 Piring, ASTM A564 GR 630, and AMS 5604 for sheet, strip, and plate. SASA FLANGE can provide these flanges in eight different aged precipitation-hardened conditions depending on strength requirements.
Q: What pressure ratings does a 17 4 ph slip on flanges support?
A: Peringkat tekanan tergantung pada dimensi flensa, applicable piping standard, suhu operasi, and required aged condition of 17-4 PH. The material retains strong mechanical properties up to 600°F, but a specific pressure class must be matched to the design code and service conditions. SASA FLANGE can manufacture slip-on flanges to the required pressure class based on project drawings, ukuran, and wall thickness requirements.
Q: What standards does a 17 4 ph slip on flanges comply with?
A: These flanges are produced from 17-4 PH stainless steel to recognized material designations including UNS S17400, AISI 630, Nilai 630, dan materi 1.4542. Applicable material standards include ASTM A564-630, ASTM A564 GR 630, ASTM A693 Piring, and AMS 5604 for sheet, strip, and plate. SASA FLANGE persediaan ISO 9001:2015 quality documentation and MTC to EN 10204 3.1 bila diperlukan.
Q: What is the lead time for custom 17 4 ph slip on flanges orders?
A: For custom orders, SASA FLANGE typically delivers 17-4 PH slip-on flanges in 15-30 hari, tergantung pada ukuran, kuantitas, aged condition, machining scope, dan persyaratan pemeriksaan. Stok barang biasanya tersedia di 3-7 hari. All flanges are manufactured under ISO 9001:2015 quality control, dengan EN 10204 3.1 MTC available. For urgent schedules, hubungi sales@sasaflange.com atau WhatsApp +86 13764965049.
Pengemasan dan Pengiriman
📦 Pengepakan merupakan hal yang cukup penting terutama dalam kasus pengiriman internasional dimana kiriman melewati berbagai jalur untuk mencapai tujuan akhir, jadi kami menaruh perhatian khusus pada pengemasan untuk memastikan setiap barang tiba dalam kondisi sempurna.
SASA FLANGE mengemas barang dengan berbagai cara berdasarkan jenis produk dan kebutuhan pelanggan. Pilihan kemasan standar kami meliputi:
- Kasus kayu lapis / peti – untuk flensa berat dan produk berdiameter besar
- Palet dengan bungkus menyusut – untuk pesanan massal dan ukuran standar
- Polybag individu + kotak karton – untuk flensa dan fitting kecil
- Lapisan minyak anti karat + kertas tahan air – untuk angkutan laut jarak jauh
- Penandaan dan pelabelan khusus – sesuai spesifikasi pelanggan atau persyaratan proyek
Semua kemasan memenuhi standar ekspor internasional. Instruksi pengepakan khusus diterima berdasarkan permintaan.
