Keterangan
Detil Produk
PEEK threaded flanges are non-metallic threaded flanges machined from polyether ether ketone for joining threaded pipe systems without welding. They offer outstanding resistance to aggressive chemicals, hydrolysis, high purity media and elevated temperatures, while also providing excellent mechanical strength, dimensional stability and electrical insulation. These flanges are widely used in chemical dosing lines, ultrapure water systems, instrumentasi, marine utility lines and specialty industrial piping.
SASA FLANGE supplies standard and custom PEEK threaded flanges according to ASME, EN, DIN, JIS, GB dan gambar pelanggan. Setiap pesanan dapat didukung dengan verifikasi bahan baku, chemical analysis reference data, pengujian mekanis, pemeriksaan dimensi, PMI identification where specified, EN 10204 3.1 certificate and full batch number traceability to ensure reliable performance in critical B2B applications.
- ✓Nama Produk: PEEK Threaded Flanges
- ✓Kelas Bahan: Virgin PEEK, PEEK GF30, PEEK CF30
- ✓Jenis Produk: Non-metallic Threaded Flanges
- ✓Fitur Utama: Ketahanan kimia yang sangat baik, konstruksi ringan, insulation and high temperature capability
- ✓Aplikasi: Pemrosesan kimia, pengolahan air, semiconductor, instrumentasi, marine and specialty piping systems
Parameter Produk
| Nama Produk | PEEK Threaded Flanges |
| Kelas Bahan | Virgin PEEK, PEEK GF30, PEEK CF30 |
| Jenis Bahan | High-performance thermoplastic polymer |
| Formulir Produk | CNC machined threaded flange |
| Rentang Ukuran | DN15 – DN300 (1/2 inci – 12 inci) |
| Kelas Tekanan | Kelas 150 – 300 / PN10 – PN40 |
| Menyegel Wajah | Federasi Rusia, FF, optional flat machined gasket face |
| Perawatan Permukaan | Hasil akhir alami dengan mesin, deburring, pembersihan, pembungkus pelindung |
| Standar | ASME B16.5, EN 1092-1, DIN, JIS, GB atau spesifikasi pelanggan |
| Inspeksi | Analisis Kimia, Uji Mekanik, Tes PMI, Dimensi, Hidrostatik |
| Sertifikat | EN 10204 3.1 Sertifikat Bahan tersedia |
| Layanan Pemrosesan | Pemotongan, Pemesinan CNC, Pengeboran Khusus, Pemrosesan Ukuran Khusus |
Komposisi Kimia
The chemical composition below is provided for reference for industrial PEEK material commonly used in threaded flanges. Final composition depends on the selected raw material grade, such as unfilled or reinforced PEEK, and will follow the applicable manufacturer data sheet and material test certificate supplied with the order.
| Elemen | C | Dan | M N | P | S | Kr | Di dalam | Mo | Lainnya |
|---|---|---|---|---|---|---|---|---|---|
| Isi % | 61.0-63.0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | HAI 18.0-20.0, H 2.0-3.0, glass fiber or carbon fiber optional |
Sifat Mekanik
Mechanical properties of PEEK threaded flanges vary by raw material grade, reinforcement type, machining condition and service temperature. The values below are typical room temperature reference data for commonly used industrial PEEK materials. Final test values may differ by thickness and product geometry and should be confirmed against the supplied batch certificate where required.
| Nilai | Kekuatan Tarik | Kekuatan Hasil | Pemanjangan | Kekerasan | Kepadatan |
|---|---|---|---|---|---|
| Virgin PEEK | 95-100 MPa | 90-95 MPa | 20% menit | 85-90 Pantai D | 1.30 gram/cm3 |
| PEEK GF30 | 155-165 MPa | 140-150 MPa | 3-5% menit | 88-90 Pantai D | 1.50 gram/cm3 |
Tabel Ukuran Umum
| Rentang Ukuran | Kelas Tekanan | Menyegel Wajah | Bahan | Tersedianya |
|---|---|---|---|---|
| DN15 – DN50 | Kelas 150 – 300 | Federasi Rusia / FF | Virgin PEEK | Saham / Produksi |
| DN65 – DN150 | Kelas 150 – 300 | Federasi Rusia / FF | Virgin PEEK / PEEK GF30 | Saham / Produksi |
| DN200 – DN300 | Kelas 150 – 300 | Federasi Rusia / FF | PEEK GF30 / PEEK CF30 | Produksi |
| DN350 – DN600 | PN10 – PN16 | FF | Virgin PEEK / PEEK GF30 | Dibuat Sesuai Pesanan |
Perbandingan Spesifikasi Berbeda
| Jenis | Keterangan | Penggunaan Khas |
|---|---|---|
| Flensa Berulir ASME | NPT threaded flange machined to ASME B16.5 dimensions with raised or flat face | Garis instrumentasi, layanan kimia, low to moderate pressure threaded piping |
| ID Flensa Berulir | BSP or ISO threaded flange produced to EN 1092-1 related drilling dimensions and customer thread requirement | Pabrik proses Eropa, utility systems and water treatment skids |
| PEEK GF30 Threaded Flange | Glass fiber reinforced PEEK flange with higher stiffness and better dimensional stability | Dosis kimia, pump connections and support-sensitive piping |
| Custom Machined PEEK Flange | Pengeboran khusus, ketebalan, bentuk benang, gasket face or non-standard dimensions based on drawing | peralatan oem, semiconductor systems and compact modular units |
Standar Setara dan Nama Internasional
PEEK threaded flanges are usually machined to international flange drilling and dimensional standards, while the material itself is supplied as industrial PEEK polymer rather than metallic forging grades. Equivalent standard references below indicate the common flange dimension systems used for interchangeability in global projects, with thread form confirmed according to customer specification.
| Standar / Wilayah | Kode Standar | Kelas Khas / Setara |
|---|---|---|
| Amerika Serikat | ASME B16.5 | PEEK threaded flange with NPT thread, virgin PEEK or reinforced PEEK |
| Eropa | EN 1092-1 | PEEK machined flange to PN drilling, BSP or ISO thread on request |
| Jerman | DIN 2527 / 2566 | PEEK threaded flange to DIN drilling pattern, custom thread specification |
| Jepang | JIS B2220 | PEEK threaded flange to JIS drilling dimensions for chemical utility piping |
| Cina | GB/T 9119 | PEEK threaded flange to GB dimensions, custom machining available |
Alur Proses Produksi
SASA FLANGE controls each production stage from qualified PEEK stock selection to final machining and inspection. Strict dimensional control is essential for threaded engagement, bolt hole alignment and gasket sealing reliability in non-metallic flange applications.
- 1. Pemilihan Bahan Baku
- 2. Penempaan / Pemotongan
- 3. Perlakuan Panas
- 4. Pemesinan Kasar
- 5. Selesaikan Pemesinan
- 6. Pengeboran
- 7. Perawatan Permukaan
- 8. Inspeksi
- 9. Menandai
- 10. Sedang mengemas
- 11. Pengiriman
| Langkah Proses | Keterangan | Titik Kendali Mutu |
|---|---|---|
| Bahan mentah | Select certified PEEK rods, plates or billets from approved sources | Material certificate and batch traceability |
| Pemotongan / Blank Preparation | Cut raw stock to required blank size for machining | Blank size tolerance and material identification |
| Menghilangkan Stres | Material conditioning or stress relief where required for dimensional stability | Kontrol suhu dan waktu penahanan |
| permesinan | Wajah penyegel mesin, benang, lubang baut dan diameter luar | Akurasi dimensi, thread quality and surface finish |
| Inspeksi | Inspeksi akhir sebelum pengiriman | Dimensi, penampilan, menandai, PMI identification and pressure test if specified |
Inspeksi Produk
1. Pemeriksaan Komposisi Kimia
For PEEK threaded flanges, chemical composition verification is based on the polymer supplier certificate and incoming raw material identification. SASA FLANGE reviews batch data for base resin and reinforced grades to confirm the correct material type is used. This helps ensure the flange meets the expected chemical resistance, purity level and application requirement before machining.
2. Pengujian Sifat Mekanik
Mechanical property control includes review of raw material data and, bila diperlukan, reference testing for tensile strength, perilaku hasil, elongation and hardness of the selected PEEK grade. These checks help confirm the flange material has suitable strength and dimensional stability for threaded joint service, khususnya di bidang kimia, water treatment and OEM process equipment applications.
3. Inspeksi Dimensi
Each PEEK threaded flange is checked for flange outside diameter, ketebalan, lingkaran baut, diameter lubang, facing height and thread accuracy. Sealing face flatness and machined finish are also inspected to support proper gasket compression and leak-tight assembly. Dimensional inspection is especially important for non-metallic flanges because correct fit directly affects performance and service life.
4. Pengujian PMI dan Pengujian Hidrostatis
PMI for PEEK flanges is generally applied as raw material identification and batch verification rather than alloy chemistry analysis used for metals. Ketika ditentukan, SASA FLANGE can support assembly-level hydrostatic pressure testing or mating system verification. EN 10204 3.1 sertifikat, dimensional reports and material traceability documents are supplied to support quality assurance for project orders.
Kemasan Produk
- ✓Kemasan Kotak Kayu: Cocok untuk produk bertekanan tinggi dan berdiameter besar
- ✓Pengepakan Palet dengan Shrink Wrap: Cocok untuk pengiriman batch dan ukuran standar
- ✓Lapisan Minyak Anti Karat + Kertas Tahan Air: Digunakan untuk perlindungan angkutan laut
- ✓Kantong Plastik Individu + Karton: Digunakan untuk perlengkapan kecil dan produk berulir
- ✓Hapus Penandaan: Nilai, ukuran, kelas tekanan, nomor panas dan nomor PO
Aplikasi
PEEK threaded flanges are selected for services where corrosion resistance, kebersihan, electrical insulation and low system weight are more important than very high pressure capability. They are widely used in specialized industrial piping, OEM equipment and process systems handling aggressive or high-purity media.
| Industri | Aplikasi Khas | Mengapa Produk Ini Digunakan |
|---|---|---|
| Minyak dan Gas | Selip injeksi kimia, analyzer lines and offshore utility systems | Offers corrosion resistance, low weight and reliable threaded installation in compact systems |
| Pengolahan Kimia | Acid and alkali transfer lines, dosing equipment and reactor auxiliary piping | PEEK withstands many aggressive chemicals and avoids metallic contamination |
| Pembangkit Listrik | Sampling panels, instrumentation cooling lines and specialty auxiliary systems | Provides insulation, dimensional stability and resistance to treated water and process chemicals |
| Pengolahan Air | RO tergelincir, chemical dosing units, ultrapure water loops and membrane support systems | Suitable for clean service, corrosion resistance and easy maintenance in threaded piping |
| Kelautan dan Lepas Pantai | Light-duty corrosive service lines, onboard chemical systems and monitoring equipment | Resists salt-laden environments and reduces system weight compared with metal flanges |
Mengapa Memilih SASA FLANGE?
- ✓Produsen profesional Flensa Berulir untuk proyek industri global
- ✓Ukuran yang disesuaikan, kelas tekanan dan kelas material sesuai gambar
- ✓Dukungan standar penuh: ASME, EN, DIN, JIS, GB, Spesifikasi gost dan pelanggan
- ✓Ketertelusuran material dengan kontrol nomor panas dan EN 10204 3.1 sertifikat materi
- ✓Analisis kimia, pengujian mekanis, pengujian PMI, pemeriksaan hidrostatik dan dimensi
- ✓Ketersediaan stok untuk barang standar, waktu tunggu 3-7 hari; produksi khusus 15-30 hari
- ✓Kemasan kelas ekspor untuk laut, transportasi udara dan darat
- ✓15+ pengalaman bertahun-tahun memasok 50+ negara-negara di seluruh dunia
Pertanyaan Umum
Q: What is a PEEK threaded flange?
A: A PEEK threaded flange is a non-metallic flange machined from polyether ether ketone with an internal thread for connection to threaded pipe or fittings. It is used where corrosion resistance, electrical insulation, low weight and clean service are required. Compared with welded flanges, it allows easier installation in compact systems and specialized process lines.
Q: What materials are available for PEEK threaded flanges?
A: SASA FLANGE can supply PEEK threaded flanges in virgin PEEK, glass-filled PEEK and carbon-filled PEEK depending on pressure, stiffness and application requirements. Virgin PEEK is preferred for clean and high-purity service, while reinforced grades provide greater rigidity and dimensional stability. Material selection is confirmed according to medium, suhu, pressure and customer specification.
Q: Kelas tekanan apa yang didukung?
A: PEEK threaded flanges are commonly supplied in ASME Class 150 Dan 300, or EN/DIN equivalents such as PN10, PN16, PN25 dan PN40, depending on size and design. Because PEEK is a thermoplastic material, pressure capability must be evaluated together with service temperature, flange thickness and media. SASA FLANGE can recommend suitable dimensions based on project conditions.
Q: Bisa SASA FLANGE menyediakan ukuran khusus?
A: Ya. SASA FLANGE can manufacture custom PEEK threaded flanges according to drawings or project requirements, including special outside diameter, ketebalan, pola pengeboran, bentuk benang, gasket face and reinforced material grade. We also support machining to ASME, EN, DIN, JIS and GB drilling dimensions for OEM assemblies, skid packages and replacement components.
Q: Sertifikat apa yang diberikan?
A: SASA FLANGE dapat menyediakan EN 10204 3.1 sertifikat materi, raw material batch documents, dimensional inspection reports and marking traceability for PEEK threaded flanges. Jika diperlukan, we also support PMI identification records, pressure or assembly test reports and full order documentation. Final certification package depends on the selected standard, application and customer project specification.
Hubungi kami
If you are looking for peek threaded flanges or related custom flange products, silakan hubungi SASA FLANGE dengan ukuran yang Anda butuhkan, kelas tekanan, kelas materi, standar, perawatan permukaan, kuantitas dan persyaratan inspeksi. Tim kami akan memberikan solusi teknis profesional dan penawaran harga kompetitif di dalamnya 24 jam.
- 📧 Surel: penjualan@sasaflange.com
- 📱 Ada apa: +86 13764965049
- ☎️ Telp: +86 21 52236361
- 🌐 Situs web: www.sasaflange.com












