Sự miêu tả
Chi tiết sản phẩm
PEEK threaded flanges are non-metallic threaded flanges machined from polyether ether ketone for joining threaded pipe systems without welding. They offer outstanding resistance to aggressive chemicals, hydrolysis, high purity media and elevated temperatures, while also providing excellent mechanical strength, dimensional stability and electrical insulation. These flanges are widely used in chemical dosing lines, ultrapure water systems, thiết bị đo đạc, marine utility lines and specialty industrial piping.
SASA FLANGE supplies standard and custom PEEK threaded flanges according to ASME, EN, DIN, JIS, GB and customer drawings. Mỗi đơn hàng có thể được hỗ trợ xác minh nguyên liệu thô, chemical analysis reference data, thử nghiệm cơ khí, kiểm tra chiều, PMI identification where specified, EN 10204 3.1 certificate and full batch number traceability to ensure reliable performance in critical B2B applications.
- ✓Tên sản phẩm: PEEK Threaded Flanges
- ✓Lớp vật liệu: Virgin PEEK, PEEK GF30, PEEK CF30
- ✓Loại sản phẩm: Non-metallic Threaded Flanges
- ✓Tính năng chính: Kháng hóa chất tuyệt vời, xây dựng nhẹ, insulation and high temperature capability
- ✓Ứng dụng: Xử lý hóa chất, xử lý nước, semiconductor, thiết bị đo đạc, marine and specialty piping systems
Thông số sản phẩm
| Tên sản phẩm | PEEK Threaded Flanges |
| Lớp vật liệu | Virgin PEEK, PEEK GF30, PEEK CF30 |
| Loại vật liệu | High-performance thermoplastic polymer |
| Mẫu sản phẩm | CNC machined threaded flange |
| Phạm vi kích thước | DN15 – DN300 (1/2 inch – 12 inch) |
| Lớp áp lực | Lớp học 150 – 300 / PN10 – PN40 |
| Niêm phong mặt | RF, FF, optional flat machined gasket face |
| Xử lý bề mặt | Machined natural finish, deburring, dọn dẹp, bọc bảo vệ |
| Tiêu chuẩn | ASME B16.5, EN 1092-1, DIN, JIS, GB hoặc đặc điểm kỹ thuật của khách hàng |
| Điều tra | Phân tích hóa học, Kiểm tra cơ khí, Kiểm tra PMI, chiều, Thủy tĩnh |
| Giấy chứng nhận | EN 10204 3.1 Giấy chứng nhận vật liệu có sẵn |
| Dịch vụ xử lý | Cắt, Gia công CNC, Khoan tùy chỉnh, Xử lý kích thước tùy chỉnh |
Thành phần hóa học
The chemical composition below is provided for reference for industrial PEEK material commonly used in threaded flanges. Final composition depends on the selected raw material grade, such as unfilled or reinforced PEEK, and will follow the applicable manufacturer data sheet and material test certificate supplied with the order.
| Yếu tố | C | Và | Mn | P | S | Cr | TRONG | Mo | Khác |
|---|---|---|---|---|---|---|---|---|---|
| Nội dung % | 61.0-63.0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ồ 18.0-20.0, H 2.0-3.0, glass fiber or carbon fiber optional |
Tính chất cơ học
Mechanical properties of PEEK threaded flanges vary by raw material grade, reinforcement type, machining condition and service temperature. The values below are typical room temperature reference data for commonly used industrial PEEK materials. Final test values may differ by thickness and product geometry and should be confirmed against the supplied batch certificate where required.
| Cấp | Độ bền kéo | Sức mạnh năng suất | Độ giãn dài | độ cứng | Tỉ trọng |
|---|---|---|---|---|---|
| Virgin PEEK | 95-100 MPa | 90-95 MPa | 20% phút | 85-90 Bờ D | 1.30 g/cm3 |
| PEEK GF30 | 155-165 MPa | 140-150 MPa | 3-5% phút | 88-90 Bờ D | 1.50 g/cm3 |
Bảng kích thước chung
| Phạm vi kích thước | Lớp áp lực | Niêm phong mặt | Vật liệu | sẵn có |
|---|---|---|---|---|
| DN15 – DN50 | Lớp học 150 – 300 | RF / FF | Virgin PEEK | Cổ phần / Sản xuất |
| DN65 – DN150 | Lớp học 150 – 300 | RF / FF | Virgin PEEK / PEEK GF30 | Cổ phần / Sản xuất |
| DN200 – DN300 | Lớp học 150 – 300 | RF / FF | PEEK GF30 / PEEK CF30 | Sản xuất |
| DN350 – DN600 | PN10 – PN16 | FF | Virgin PEEK / PEEK GF30 | Thực hiện theo đơn đặt hàng |
So sánh thông số kỹ thuật khác nhau
| Kiểu | Sự miêu tả | Sử dụng điển hình |
|---|---|---|
| Mặt bích có ren ASME | NPT threaded flange machined to ASME B16.5 dimensions with raised or flat face | Dây chuyền đo đạc, dịch vụ hóa chất, low to moderate pressure threaded piping |
| EN Mặt bích có ren | BSP or ISO threaded flange produced to EN 1092-1 related drilling dimensions and customer thread requirement | Nhà máy chế biến châu Âu, utility systems and water treatment skids |
| PEEK GF30 Threaded Flange | Glass fiber reinforced PEEK flange with higher stiffness and better dimensional stability | Định lượng hóa chất, pump connections and support-sensitive piping |
| Custom Machined PEEK Flange | Khoan đặc biệt, độ dày, dạng chủ đề, gasket face or non-standard dimensions based on drawing | thiết bị OEM, semiconductor systems and compact modular units |
Tiêu chuẩn tương đương và tên quốc tế
PEEK threaded flanges are usually machined to international flange drilling and dimensional standards, while the material itself is supplied as industrial PEEK polymer rather than metallic forging grades. Equivalent standard references below indicate the common flange dimension systems used for interchangeability in global projects, with thread form confirmed according to customer specification.
| Tiêu chuẩn / Vùng đất | Mã tiêu chuẩn | Lớp điển hình / Tương đương |
|---|---|---|
| Hoa Kỳ | ASME B16.5 | PEEK threaded flange with NPT thread, virgin PEEK or reinforced PEEK |
| Châu Âu | EN 1092-1 | PEEK machined flange to PN drilling, BSP or ISO thread on request |
| nước Đức | DIN 2527 / 2566 | PEEK threaded flange to DIN drilling pattern, custom thread specification |
| Nhật Bản | JIS B2220 | PEEK threaded flange to JIS drilling dimensions for chemical utility piping |
| Trung Quốc | GB/T 9119 | PEEK threaded flange to GB dimensions, custom machining available |
Quy trình sản xuất
SASA FLANGE controls each production stage from qualified PEEK stock selection to final machining and inspection. Strict dimensional control is essential for threaded engagement, bolt hole alignment and gasket sealing reliability in non-metallic flange applications.
- 1. Lựa chọn nguyên liệu thô
- 2. rèn / Cắt
- 3. Xử lý nhiệt
- 4. Gia công thô
- 5. Gia công hoàn thiện
- 6. khoan
- 7. Xử lý bề mặt
- 8. Điều tra
- 9. Đánh dấu
- 10. đóng gói
- 11. Vận chuyển
| Bước xử lý | Sự miêu tả | Điểm kiểm soát chất lượng |
|---|---|---|
| Nguyên liệu thô | Select certified PEEK rods, plates or billets from approved sources | Material certificate and batch traceability |
| Cắt / Blank Preparation | Cut raw stock to required blank size for machining | Blank size tolerance and material identification |
| Giảm căng thẳng | Material conditioning or stress relief where required for dimensional stability | Kiểm soát nhiệt độ và thời gian giữ |
| Gia công | Mặt niêm phong máy, chủ đề, lỗ bu lông và đường kính ngoài | Độ chính xác kích thước, thread quality and surface finish |
| Điều tra | Kiểm tra lần cuối trước khi vận chuyển | Kích thước, vẻ bề ngoài, đánh dấu, PMI identification and pressure test if specified |
Kiểm tra sản phẩm
1. Kiểm tra thành phần hóa học
For PEEK threaded flanges, chemical composition verification is based on the polymer supplier certificate and incoming raw material identification. SASA FLANGE reviews batch data for base resin and reinforced grades to confirm the correct material type is used. This helps ensure the flange meets the expected chemical resistance, purity level and application requirement before machining.
2. Kiểm tra tính chất cơ học
Mechanical property control includes review of raw material data and, khi được yêu cầu, reference testing for tensile strength, hành vi năng suất, elongation and hardness of the selected PEEK grade. These checks help confirm the flange material has suitable strength and dimensional stability for threaded joint service, đặc biệt là trong hóa chất, water treatment and OEM process equipment applications.
3. Kiểm tra kích thước
Each PEEK threaded flange is checked for flange outside diameter, độ dày, vòng tròn bu lông, đường kính lỗ, facing height and thread accuracy. Sealing face flatness and machined finish are also inspected to support proper gasket compression and leak-tight assembly. Dimensional inspection is especially important for non-metallic flanges because correct fit directly affects performance and service life.
4. Kiểm tra PMI và kiểm tra thủy tĩnh
PMI for PEEK flanges is generally applied as raw material identification and batch verification rather than alloy chemistry analysis used for metals. Khi được chỉ định, SASA FLANGE can support assembly-level hydrostatic pressure testing or mating system verification. EN 10204 3.1 giấy chứng nhận, dimensional reports and material traceability documents are supplied to support quality assurance for project orders.
Bao bì sản phẩm
- ✓Bao bì bằng gỗ: Thích hợp cho các sản phẩm có áp suất cao và đường kính lớn
- ✓Đóng gói pallet bằng màng co: Thích hợp cho các lô hàng theo lô và kích thước tiêu chuẩn
- ✓Sơn dầu chống gỉ + Giấy chống thấm: Được sử dụng để bảo vệ vận tải đường biển
- ✓Túi nhựa cá nhân + thùng carton: Được sử dụng cho các phụ kiện nhỏ và các sản phẩm ren
- ✓Đánh dấu rõ ràng: Cấp, kích cỡ, lớp áp lực, số nhiệt và số PO
Ứng dụng
PEEK threaded flanges are selected for services where corrosion resistance, sự sạch sẽ, electrical insulation and low system weight are more important than very high pressure capability. They are widely used in specialized industrial piping, OEM equipment and process systems handling aggressive or high-purity media.
| Ngành công nghiệp | Ứng dụng điển hình | Tại sao sản phẩm này được sử dụng |
|---|---|---|
| Dầu khí | Trượt phun hóa chất, analyzer lines and offshore utility systems | Offers corrosion resistance, low weight and reliable threaded installation in compact systems |
| Xử lý hóa chất | Acid and alkali transfer lines, dosing equipment and reactor auxiliary piping | PEEK withstands many aggressive chemicals and avoids metallic contamination |
| Phát điện | Sampling panels, instrumentation cooling lines and specialty auxiliary systems | Provides insulation, dimensional stability and resistance to treated water and process chemicals |
| Xử lý nước | RO trượt, chemical dosing units, ultrapure water loops and membrane support systems | Suitable for clean service, corrosion resistance and easy maintenance in threaded piping |
| Hàng hải và ngoài khơi | Light-duty corrosive service lines, onboard chemical systems and monitoring equipment | Resists salt-laden environments and reduces system weight compared with metal flanges |
Tại sao chọn SASA FLANGE?
- ✓Nhà sản xuất mặt bích ren chuyên nghiệp cho các dự án công nghiệp toàn cầu
- ✓Kích thước tùy chỉnh, cấp áp lực và cấp vật liệu theo bản vẽ
- ✓Hỗ trợ tiêu chuẩn đầy đủ: ASME, EN, DIN, JIS, GB, GOST và thông số kỹ thuật của khách hàng
- ✓Truy xuất nguồn gốc vật liệu với khả năng kiểm soát số lượng nhiệt và EN 10204 3.1 giấy chứng nhận vật chất
- ✓Phân tích hóa học, thử nghiệm cơ khí, Kiểm tra PMI, kiểm tra thủy tĩnh và kích thước
- ✓Hàng sẵn có cho các mặt hàng tiêu chuẩn, thời gian dẫn 3-7 ngày; tùy chỉnh sản xuất 15-30 ngày
- ✓Bao bì xuất khẩu cho biển, vận tải đường hàng không và đường bộ
- ✓15+ năm kinh nghiệm cung cấp 50+ các nước trên toàn thế giới
Câu hỏi thường gặp
Q: What is a PEEK threaded flange?
MỘT: A PEEK threaded flange is a non-metallic flange machined from polyether ether ketone with an internal thread for connection to threaded pipe or fittings. It is used where corrosion resistance, electrical insulation, low weight and clean service are required. Compared with welded flanges, it allows easier installation in compact systems and specialized process lines.
Q: What materials are available for PEEK threaded flanges?
MỘT: SASA FLANGE can supply PEEK threaded flanges in virgin PEEK, glass-filled PEEK and carbon-filled PEEK depending on pressure, stiffness and application requirements. Virgin PEEK is preferred for clean and high-purity service, while reinforced grades provide greater rigidity and dimensional stability. Material selection is confirmed according to medium, nhiệt độ, pressure and customer specification.
Q: Lớp áp lực nào được hỗ trợ?
MỘT: PEEK threaded flanges are commonly supplied in ASME Class 150 Và 300, or EN/DIN equivalents such as PN10, PN16, PN25 và PN40, depending on size and design. Because PEEK is a thermoplastic material, pressure capability must be evaluated together with service temperature, flange thickness and media. SASA FLANGE can recommend suitable dimensions based on project conditions.
Q: Có thể SASA FLANGE cung cấp kích thước tùy chỉnh?
MỘT: Đúng. SASA FLANGE can manufacture custom PEEK threaded flanges according to drawings or project requirements, including special outside diameter, độ dày, kiểu khoan, dạng chủ đề, gasket face and reinforced material grade. We also support machining to ASME, EN, DIN, JIS and GB drilling dimensions for OEM assemblies, skid packages and replacement components.
Q: Giấy chứng nhận nào được cung cấp?
MỘT: SASA FLANGE có thể cung cấp EN 10204 3.1 giấy chứng nhận vật chất, raw material batch documents, dimensional inspection reports and marking traceability for PEEK threaded flanges. Trường hợp cần thiết, we also support PMI identification records, pressure or assembly test reports and full order documentation. Final certification package depends on the selected standard, application and customer project specification.
Liên hệ với chúng tôi
If you are looking for peek threaded flanges or related custom flange products, vui lòng liên hệ SASA FLANGE với kích thước yêu cầu của bạn, lớp áp lực, lớp vật liệu, tiêu chuẩn, xử lý bề mặt, yêu cầu về số lượng và kiểm tra. Đội ngũ của chúng tôi sẽ cung cấp các giải pháp kỹ thuật chuyên nghiệp và báo giá cạnh tranh trong vòng 24 giờ.
- 📧 Email: sales@sasaflange.com
- 📱 WhatsApp: +86 13764965049
- ☎️ ĐT: +86 21 52236361
- 🌐 Trang web: www.sasaflange.com












