Apa Spesifikasi Selesai Wajah Flange

Dalam sistem perpipaan industri, flensa membentuk titik sambungan penting antar pipa, katup, pompa, dan peralatan. Sedangkan jenis dan ukuran flensa itu penting, one of the most overlooked yet essential aspects is the flange face finish specification. This refers to the surface texture of the flange face, which plays a vital role in ensuring a reliable seal between the flange and the gasket.

Dalam artikel ini, we will explain what flange face finish specifications are, mengapa itu penting, the most common types, and how to choose the correct finish for your application. Shared by sasa lonjong, your trusted source for precision-engineered flanges and components.

Apa Itu Selesai Wajah Flange?

Itu penyelesaian muka flensa mengacu kepada surface roughness or texture on the sealing face of the flange. This texture helps create a tight seal between the flange and the gasket when bolted together, preventing leaks and pressure loss in the system.

The face finish is not just a cosmetic feature. It directly affects:

Gasket performance
Seal integrity
Flange compatibility

Pada sasa lonjong, all flanges are machined with surface finishes that conform to international standards to guarantee leak-tight connections in various industrial applications.

Why Flange Face Finish Matters

A properly specified face finish ensures:

Better gasket grip – rougher surfaces help bite into softer gasket materials
Improved sealing – even pressure distribution reduces risk of leaks
Standardisasi – ensures compatibility across manufacturers and suppliers

Without the correct surface finish, even a high-quality gasket can fail due to uneven compression or insufficient friction. That’s why flange face finish is a critical element in flange design and manufacturing.

Common Flange Face Types

Before discussing finish textures, it’s important to understand the main flange face types, each requiring specific finish standards:

Wajah Terangkat (Federasi Rusia) – Most common type, with a raised sealing area
Wajah Datar (FF) – Entire flange face lies flat, used in low-pressure systems
Sambungan Tipe Cincin (RTJ) – Grooved face designed for metal ring gaskets
Male & Female (M&F) – Mating surfaces with raised and recessed areas
Lidah & Alur (T&G) – Matching surfaces for specialized sealing

Each face type requires a different finish to perform correctly. sasa lonjong produces flanges in all face configurations with finishes that meet strict tolerances.

Flange Face Finish Roughness Standards

Surface roughness is usually measured in terms of:

Ra (Roughness Average) – expressed in micrometers (mikron) or microinches
Standar umum meliputi ASME B16.5, EN 1092-1, Dan ISO 4287

Here are the most common finish specifications:

1. Stok Selesai

Also known as serrated concentric atau spiral serrated finish
Achieved by using a lathe with a round-nosed tool
Roughness: Ra 3.2–6.3 µm (125–250 AARH)
Ideal for soft gasket materials like graphite, PTFE, karet
Most widely used finish, especially for Raised Face flanges

Semua sasa lonjong standard RF flanges come with a stock finish unless otherwise specified.

2. Selesai Halus

Produced with a flat tool, no visible tool marks
Roughness: Ra ≤ 3.2 mikron (≤ 125 AARH)
Used with metallic or semi-metallic gaskets
Requires greater care during installation to avoid gasket slippage

3. Selesai Bergerigi Spiral

Machined in a spiral pattern
Roughness: Ra 3.2–6.3 µm
Offers excellent sealing when using compressible gaskets
Similar to stock finish but with a consistent spiral profile

4. Selesai Bergerigi Konsentris

Circular grooves with equal spacing
Improves grip and reduces the risk of blowout
Best suited for applications with cyclic pressure or temperature changes

sasa lonjong machines each flange with the correct serration depth and spacing according to gasket type and customer specification.

Surface Finish for RTJ Flanges

Ring-Type Joint flanges use metal-to-metal sealing. These require extremely smooth surface finishes with precision grooves to match the ring gasket profile.

Typical surface finish for RTJ:

Ra ≤ 1.6 mikron (≤ 63 AARH)
Machined to tight tolerances

sasa lonjong RTJ flanges are manufactured to ASME B16.5 and API 6A requirements for high-pressure sealing performance.

How to Choose the Right Face Finish

Several factors influence the choice of flange face finish:

Bahan Paking: Softer gaskets need rougher finishes for grip; metallic gaskets require smoother surfaces
Peringkat Tekanan: High-pressure systems may need smoother, tighter seals
Jenis Cairan: Toxic or hazardous fluids demand reliable sealing
Installation Conditions: Field-welded systems benefit from more forgiving stock finishes

Jika tidak yakin, berkonsultasi dengan sasa lonjong engineers to ensure optimal gasket and face finish pairing for your specific application.

Quality Assurance and Testing

Semua sasa lonjong flensa mengalami:

Pemesinan presisi for accurate surface profiles
Roughness testing using profilometers
Visual and dimensional inspections
Certification as per EN 10204 3.1, ASME, atau ISO 9001

We ensure every flange meets the highest standards for sealing performance, even in critical industries like oil & gas, petrokimia, dan farmasi.

Kesimpulan

Itu flange face finish specification is a vital component of any piping system. It determines how effectively a gasket can seal the flange joint and prevents leaks that can lead to system failures. From stock finishes to concentric serrations and precision RTJ grooves, each face finish has a purpose and must be matched with the right gasket and pressure conditions.

Pada sasa lonjong, we understand the importance of surface precision. Our flanges are manufactured to meet international finish standards, providing you with the safety, keandalan, and quality your projects demand.

Memilih sasa lonjong—where precision face finishes meet global engineering expectations.