Descrição
Índice
- Specifications of 904L Stainless Steel Flanges
- Size Range of SS 904L Flanges (in Inches)
- Chemical Composition of ASME SA182 904L Weld Neck Raised Face Flanges
- Mechanical & Physical Characteristics of DIN 1.4539 904Flanges L
- Variety of Industrial Flanges Made from UNS N08904 Aço inoxidável
- 904L Stainless Steel Flange Equivalent Grades and Standards
- Thermal Properties of DIN 1.4539 Ring-Type Joint Flanges
- Applications of Stainless Steel F904L Flanges
- Physical Parameters of 904L Stainless Steel Flanges
- Weight Chart for ASTM A182 F904L Long Weld Neck Flanges
- ANSI B16.5 F904L Ring Type Joint Flange Dimension Chart
- Pressure Rating Details for Stainless Steel F904L Weld Neck Flanges
Flange de aço inoxidável
904L stainless steel flanges are high-alloy components designed for use in highly corrosive environments. Fabricado a partir de UNS N08904 (DIN 1.4539), these flanges offer exceptional resistance to strong reducing acids such as sulfuric acid, as well as excellent performance against chloride-induced pitting and crevice corrosion. With low carbon content and added copper, 904L flanges maintain strength while preventing intergranular corrosion after welding. They are widely used in chemical processing, aplicações marítimas, produtos farmacêuticos, and pollution control equipment. Available types include weld neck, cego, deslizamento, solda de soquete, junta sobreposta, e flanges roscados, conforming to standards such as ASTM A182 and ANSI B16.5. Their durability and corrosion resistance make them ideal for critical piping systems in aggressive environments.
Specifications of 904L Stainless Steel Flanges
| Especificações | ASTM A182 / ASME SA182 |
|---|---|
| Aula | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.. |
| Tamanho | 1/2″ (15 Observação) para 48″ (1200Observação) |
| Padrões | ANSI/ASME B16.5, B16.48, BS4504, B 16.47 Série A & B, Bobagem 10, EN-1092, DIN, etc.. |
Size Range of SS 904L Flanges (in Inches)
| Tamanho nominal do tubo | Diâmetro externo do flange | Espessura do Flange | Diâmetro da face elevada | Diâmetro do cubo na base | Comprimento através do cubo | Diâmetro ou Furo | Diâmetro do cubo no chanfro | Raio do filete | Profundidade do soquete | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pescoço de soldagem | Soquete roscado deslizante | Junta sobreposta | Soquete deslizante | Junta sobreposta | ||||||||
| Ó | P | R | X | S | S | S | C | B | H | R | Z | |
| 1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
| 3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
| 1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
| 1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
| 1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
| 2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
| 2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
| 3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
| 3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
| 4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
| 5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
| 6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
| 8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
| 10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
| 12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
| 14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
| 16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
| 18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
| 20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
| 24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
Chemical Composition of ASME SA182 904L Weld Neck Raised Face Flanges
| Nota | C | Mn | E | P | S | Cr | Mo | Em | Cu |
| SS 904L | 0.020 máx. | 2 máx. | 1.00 máx. | 0.040 máx. | 0.030 máx. | 19.00 – 23.00 | 4.00 – 5.00 máx. | 23.00 – 28.00 | 1.00 – 2.00 |
Mechanical & Physical Characteristics of DIN 1.4539 904Flanges L
| Densidade | Ponto de fusão | Resistência à tracção | Força de rendimento (0.2%Desvio) | Alongamento |
| 7.95 g/cm3 | 1350 °C (2460 °F) | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 | 35 % |
Variety of Industrial Flanges Made from UNS N08904 Aço inoxidável
 |  |  |  |
| Flanges cegos | Flanges de junta sobreposta | Flanges de pescoço longo para solda | Flanges de Placa |
 |  |  |  |
| Reduzindo Flanges | Flanges de junta tipo anel | Deslizamento em flanges | Flanges de solda de soquete |
 |  |  |  |
| Flanges de pescoço soldado | Língua & Flanges de ranhura | Rosqueado / Flanges Parafusados | Flanges cegos para óculos |
904L Stainless Steel Flange Equivalent Grades and Standards
| PADRÃO | MATERIAL NÃO. | NÓS | JIS | Bobagem | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5 | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Thermal Properties of DIN 1.4539 Ring-Type Joint Flanges
DIN 1.4539, also known as Alloy 904L or UNS N08904, is an austenitic stainless steel designed for exceptional corrosion resistance, particularly in aggressive environments. When used in Junta tipo anel (RTJ) flanges, its thermal properties are critical for ensuring sealing performance and dimensional stability under varying temperature conditions.
| Propriedade | Value | Notas |
|---|---|---|
| Condutividade Térmica (at 20°C) | ~12.0 W/m·K | Lower than carbon steel, typical of austenitic SS |
| Specific Heat Capacity (at 20°C) | ~500 J/kg·K | High thermal inertia, suitable for stable operation |
| Coefficient of Thermal Expansion | ~16.5 µm/m·K (from 20–100°C) | Important for gasket fit in RTJ sealing surfaces |
| Faixa de fusão | 1300 – 1390°C | Indicates safe upper limit for high-temp service |
| Maximum Continuous Service Temp | ~400°C (in oxidizing environments) | Beyond this, corrosion resistance may reduce |
| Thermal Shock Resistance | Moderado | Preheating and slow cooling are recommended in cyclic heating scenarios |
These thermal characteristics make DIN 1.4539 RTJ flanges ideal for high-temperature, high-pressure sealing applications in chemical processing, refinaria, and offshore installations, where thermal cycling and aggressive media are present. Proper design allowances for expansion and thermal stress are essential to maintain joint integrity.
Applications of Stainless Steel F904L Flanges
Plantas de processamento químico
Resistant to strong acids such as sulfuric, fosfórico, e ácidos acéticos, 904L weld neck flanges are ideal for piping systems handling corrosive fluids.Óleo & Refinarias de Gás
Used in offshore and onshore installations, especially where resistance to chloride-induced stress corrosion cracking is required.Usinas de Dessalinização
Excellent performance in high-chloride environments makes them suitable for seawater treatment and desalination piping systems.Farmacêutico & Food Processing Industries
Non-reactive and hygienic surface properties make F904L flanges suitable for clean-in-place (CIP) systems and sterile fluid pipelines.Polpa & Paper Industry
Used in bleach plants and acidic process lines due to their resistance to oxidizing media.Engenharia Marinha
Preferred in shipbuilding and offshore platforms due to their durability in saline water environments.Pollution Control Equipment
Employed in flue gas desulfurization (FGD) sistemas, especially in scrubber assemblies and acid gas lines.
Physical Parameters of 904L Stainless Steel Flanges
| Propriedade | Value | Descrição |
|---|---|---|
| Densidade | 8.0 g/cm³ (8000 kg/m³) | High-density material suitable for pressure retention |
| Módulo de Elasticidade | ~200 GPa (at 20°C) | Indicates good rigidity and deformation resistance |
| Poisson’s Ratio | ~0.30 | Ratio of lateral to axial strain |
| Condutividade Térmica | ~12 W/m·K (at 20°C) | Lower than carbon steel; affects heat dissipation rate |
| Specific Heat Capacity | ~500 J/kg·K (at 20°C) | Reflects energy required to raise temperature |
| Electrical Resistivity | ~0.95 µΩ·m | Higher than common stainless grades, reducing galvanic effects |
| Magnetic Permeability | ~1.0 (non-magnetic in annealed condition) | Suitable for non-magnetic applications |
| Faixa de fusão | 1300 – 1390°C | Relevant for welding and high-temperature environments |
Weight Chart for ASTM A182 F904L Long Weld Neck Flanges
Observação: O peso real pode variar ligeiramente dependendo das dimensões exatas, espessura da flange, comprimento do pescoço, e tolerâncias de fabricação.
| Pipe Normal Diam. | O.D. Flange | Thk. Of Flange Min | Diam. de Hub | Diâmetro da face elevada | Length Hub.Y | Thread Length | Diam. of Bolt Circle | Diam. of Bolt Holes | Number of Bolts | Diam. de Parafusos (polegada) | KG | LIBRA | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| polegada | dn | Ó | C | X | G | S | T | AC | BH | BN | BD | ||
| 1/2″ | 15 | 89.00 | 11.20 | 30.20 | 35.10 | 15.70 | 15.70 | 60.50 | 15.80 | 4 | 1/2″ | 0.4 | 0.9 |
| 3/4″ | 20 | 98.50 | 12.70 | 38.10 | 42.90 | 15.70 | 15.70 | 69.90 | 15.80 | 4 | 1/2″ | 0.7 | 1.5 |
| 1″ | 25 | 108.00 | 14.20 | 49.30 | 50.80 | 17.50 | 17.50 | 79.30 | 15.80 | 4 | 1/2″ | 0.8 | 1.8 |
| 1-1/4″ | 32 | 117.50 | 15.70 | 58.70 | 63.50 | 20.60 | 20.60 | 88.90 | 15.80 | 4 | 1/2″ | 1.2 | 2.6 |
| 1-1/2″ | 40 | 127.00 | 17.50 | 65.00 | 73.20 | 22.40 | 22.40 | 98.60 | 15.80 | 4 | 1/2″ | 1.5 | 3.3 |
| 2″ | 50 | 152.50 | 19.10 | 77.70 | 91.90 | 25.40 | 25.40 | 120.70 | 19.10 | 4 | 5/8″ | 2.3 | 5.1 |
| 2-1/2″ | 65 | 178.00 | 22.40 | 90.40 | 104.60 | 28.40 | 28.40 | 139.70 | 19.10 | 4 | 5/8″ | 3.7 | 8.1 |
| 3″ | 80 | 190.50 | 23.90 | 108.00 | 127.00 | 30.20 | 30.20 | 152.40 | 19.10 | 4 | 5/8″ | 4.1 | 9 |
| 3-1/2″ | 90 | 216.00 | 23.90 | 122.20 | 139.70 | 31.80 | 31.80 | 177.80 | 19.10 | 8 | 5/8″ | 5.1 | 11.2 |
| 4″ | 100 | 228.50 | 23.90 | 134.90 | 157.20 | 33.30 | 33.30 | 190.50 | 19.10 | 8 | 5/8″ | 5.9 | 13 |
| 5″ | 125 | 254.00 | 23.90 | 163.60 | 185.70 | 36.60 | 36.60 | 215.90 | 22.40 | 8 | 3/4″ | 7 | 15.4 |
| 6″ | 150 | 279.50 | 25.40 | 192.00 | 215.90 | 39.60 | 39.60 | 241.30 | 22.40 | 8 | 3/4″ | 8.4 | 18.5 |
| 8″ | 200 | 343.00 | 28.40 | 246.10 | 269.70 | 44.50 | 44.50 | 298.50 | 22.40 | 8 | 3/4″ | 13 | 28.6 |
| 10″ | 250 | 406.50 | 30.20 | 304.80 | 323.90 | 49.30 | 49.30 | 362.00 | 25.40 | 12 | 7/8″ | 18 | 39.5 |
| 12″ | 300 | 482.50 | 31.80 | 365.30 | 381.00 | 55.60 | 55.60 | 431.80 | 25.40 | 12 | 7/8″ | 29 | 64 |
| 14″ | 350 | 533.50 | 35.10 | 400.10 | 412.80 | 57.20 | 57.20 | 476.30 | 28.50 | 12 | 1″ | 39 | 86 |
| 16″ | 400 | 597.00 | 36.60 | 457.20 | 469.90 | 63.50 | 63.50 | 539.80 | 28.50 | 16 | 1″ | 47 | 103 |
| 18″ | 450 | 635.00 | 39.60 | 505.00 | 533.40 | 68.30 | 68.30 | 577.90 | 31.80 | 16 | 1 1/8″ | 57 | 126 |
| 20″ | 500 | 698.50 | 42.90 | 558.80 | 584.20 | 73.20 | 73.20 | 635.00 | 31.80 | 20 | 1 1/8″ | 76 | 167 |
| 24″ | 600 | 813.00 | 47.80 | 663.40 | 692.20 | 82.60 | 82.60 | 749.30 | 35.10 | 20 | 1 1/4″ | 97 | 214 |
ANSI B16.5 F904L Ring Type Joint Flange Dimension Chart
Material: ASTM A182 F904L (UNS N08904, DIN 1.4539)
Unit: milímetros (milímetros), unless noted
| Padrão | Aula | Diâmetro | Diâmetro do Círculo do Parafuso | Número de parafusos | Tamanho do parafuso | Diâmetro do furo do parafuso |
|---|---|---|---|---|---|---|
| AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
| COMO 2129 Flange | Tabela C | 95 | 67 | 4 | 13 | 14 |
| Tabela D | 95 | 67 | 4 | 13 | 14 | |
| Tabela E | 95 | 67 | 4 | 13 | 14 | |
| Tabela F | 95 | 67 | 4 | 13 | 14 | |
| Tabela H | 114 | 83 | 4 | 16 | 17 | |
| Tabela J | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 |
Pressure Rating Details for Stainless Steel F904L Weld Neck Flanges
| Flange Class | Max Pressure @ 100°F (38°C) | Max Pressure @ 200°F (93°C) | Max Pressure @ 400°F (204°C) |
|---|---|---|---|
| Aula 150 | 285 psi (19.6 bar) | 235 psi (16.2 bar) | 170 psi (11.7 bar) |
| Aula 300 | 740 psi (51.0 bar) | 605 psi (41.7 bar) | 460 psi (31.7 bar) |
| Aula 600 | 1480 psi (102.0 bar) | 1210 psi (83.4 bar) | 920 psi (63.4 bar) |
| Aula 900 | 2220 psi (153.1 bar) | 1815 psi (125.1 bar) | 1380 psi (95.1 bar) |
| Aula 1500 | 3705 psi (255.4 bar) | 3025 psi (208.5 bar) | 2295 psi (158.3 bar) |
| Aula 2500 | 6170 psi (425.3 bar) | 5040 psi (347.6 bar) | 3825 psi (263.8 bar) |
Key Notes:
These ratings apply to F904L weld neck flanges manufactured in accordance with ASME B16.5 usando ASTM A182 F904L forging material.
904L has excellent corrosion resistance, especially in acidic and chloride-rich environments, making it suitable for high-pressure chemical and marine systems.
Actual operating pressure should also consider factors like gasket type, bolt torque, acabamento da face do flange, and system design.
If you need pressure ratings at higher temperatures (por exemplo, 600°F or 800°F), or want EN 1092-1 PN rating equivalents, I can provide that as well.
