SASA FLANGE material center
Industrial piping materials, organized for procurement.
Compare stainless, duplex, nickel, alloy and carbon steels, titanium, copper nickel, 17-4 พีเอช, and AL-6XN—then connect each material decision to existing flange, เหมาะสม, and valve routes.
Material families
One useful page per material family.
Each page contains grade comparison, existing product routes, มาตรฐาน, RFQ controls, and direct technical answers—without multiplying thin taxonomy archives.
สแตนเลส
Austenitic grades for general, chloride, high-temperature, stabilized, and severe corrosive service.
Duplex Stainless Steel
Duplex stainless steels use a mixed austenitic-ferritic microstructure to combine elevated strength with useful corrosion resistance. Their performance depends on composition, solution heat treatment, fabrication control, and preservation of the intended phase balance.
โลหะผสมนิกเกิล
Nickel alloys are selected when a process environment exceeds the practical corrosion or temperature capability of common steels. Alloy chemistry, รูปแบบผลิตภัณฑ์, การรักษาความร้อน, การประดิษฐ์, and the exact media all matter; trade names alone are not a complete specification.
โลหะผสมเหล็ก
ASTM A182 alloy-steel grades use different chromium-molybdenum systems to support high-temperature pressure service. Their suitability depends on allowable stress, oxidation and corrosion conditions, welding procedure, การรักษาความร้อน, wall thickness, and long-term operating regime.
เหล็กกล้าคาร์บอน
Carbon steel is the baseline material route for many industrial pressure systems, but “carbon steel” alone is not a procurement specification. Product form, service temperature, notch toughness, การรักษาความร้อน, dimensional standard, and corrosion allowance must be stated.
ไทเทเนียม
Titanium combines low density with a protective oxide film that performs well in many oxidizing and chloride-bearing environments. It is not universally corrosion-proof: reducing acids, crevices, galvanic couples, อุณหภูมิ, and contamination during fabrication require review.
ทองแดงนิกเกิล
Copper-nickel alloys are widely evaluated for seawater and marine service because of their characteristic corrosion and biofouling behavior. Performance depends on alloy, flow velocity, water chemistry, commissioning, deposits, galvanic coupling, and fabrication quality.
17-4 พีเอชสแตนเลส
17-4 PH คือเหล็กกล้าไร้สนิมชนิดชุบแข็งด้วยการตกตะกอนที่ระบุว่าเป็นประเภท 630 หรือ UNS S17400. สามารถให้ความแข็งแรงสูงหลังจากผ่านการชุบแข็งตามอายุแล้ว, แต่คุณสมบัติและพฤติกรรมการกัดกร่อนขึ้นอยู่กับสภาวะการบำบัดความร้อนที่ให้มาอย่างมาก.
AL-6XN
AL-6XN is a highly alloyed super-austenitic stainless material identified by UNS N08367. Its nickel, molybdenum, chromium, and nitrogen balance is used to support strength and localized-corrosion resistance in demanding process environments.
Search architecture
Focused enough for search. Clean enough to maintain.
Material pages capture grade and procurement intent. Product categories remain the authoritative catalog structure for flanges, ฟิตติ้ง, และวาล์ว.
- 01Material family page
Explains grades, มาตรฐาน, service risks, and selection questions.
- 02Existing product categories
หน้าแปลน, อุปกรณ์ท่อ, and valves retain their current taxonomy and authority.
- 03Grade-aware catalog links
Buyers reach relevant products without new thin combination archives.
- 04GEO-ready answers
Direct FAQs, UNS and ASTM entities, and structured item lists support answer retrieval.
Need help selecting?
Start with the service conditions, not the alloy name.
Share fluid, ความเข้มข้น, ความดัน, อุณหภูมิ, component list, มาตรฐาน, and inspection requirements for a controlled material review and quotation.