• Blog
  • Nachricht
  • Lieferung von Flanschen aus legiertem Stahl mit großem Durchmesser für ein Öl- und Gasprojekt
Produktionsfoto eines geschmiedeten Flansches mit großem Durchmesser
3 August 2026

Lieferung von Flanschen aus legiertem Stahl mit großem Durchmesser für ein Öl- und Gasprojekt

ProjektnachrichtenPublished: 3 August 2026SASA FLANGE Project Team
Project completed

SASA FLANGE delivered a large-diameter alloy steel flange package for an oil and gas project. The order included weld neck and blind configurations manufactured to the specified ASME B16.47 series, with drilling, gegenüber, langweilig, NDE and packing controls documented before dispatch.

Project snapshot

Project status Delivered
Material ASTM A182 F11 and F22 alloy steel
Flanschtyp Weld neck and blind
Standard ASME B16.47, project-specified Series A or Series B
Pressure class Class 150–600
Größenbereich NPS 26–48
Inspektion PMI, UT, Härte, dimensions and visual condition
Application Oil and gas transmission and processing facilities

Delivery highlights

Series designation was controlled because Series A and Series B are not dimensionally interchangeable.
Bolt-hole orientation and mating-equipment interfaces were checked against approved drawings.
Packing design accounted for higher component mass and exposed machined faces.

Controlling large-diameter flange interfaces

For NPS 26 and larger flanges, the order description identified ASME B16.47 and the required series. The series affects outside diameter, Lochkreis, hole pattern and related dimensions, so it cannot be inferred after machining. Weld neck bores and end preparations were also checked against the connecting pipe wall and field welding plan.

Large components require staged dimensional inspection because small angular or drilling errors can become significant at the mating interface. Approved drawings and calibrated measurement tools were used as controlled references.

Handling, inspection and delivery controls

Materielle Identität, hardness and UT requirements were reviewed with the heat and production records. Final inspection included sealing faces, Schraubenlöcher, Flanschdicke, hub profile, bore and marking. Lifting and handling points were planned to avoid using machined surfaces.

Rigid face covers, separation blocks and crate bracing prevented flange-to-flange contact during road, port and ocean handling. Package weights and lifting information were marked for the receiving team.

Information needed for a comparable RFQ

A comparable inquiry should identify the exact material specification and grade, governing standard and edition, NPS, Druckklasse, Flanschtyp, gegenüber, Bohrung oder passender Rohrplan, quantity and destination. For this project-news scope, the key reference points were ASTM A182 F11 and F22 alloy steel, Weld neck and blind, Class 150–600 Und NPS 26–48.

State the required EN 10204 certificate type, Rückverfolgbarkeit der Schmelzenzahl, PMI extent, Härtegrenzen, dimensional report, NDE method and acceptance standard, third-party witness points, packing method and required delivery date at quotation stage. Early definition allows manufacturing, inspection and document schedules to be reviewed together.

Produktion, inspection and packing photos

Images show the relevant SASA FLANGE production, quality-control and shipment stages used for this project-news report.

Industrial warehouse for large project components
Finished components staged in a controlled warehouse area.
Quality inspection of large machined components
Dimensional checks supporting project release.
Large industrial flanges protected for export
Shipment protection for machined sealing surfaces.
ASME B16.5 vs ASME B16.47 Flansche ZfP-Prüfmethoden für geschmiedete Flansche aus legiertem Stahl So schützen Sie Flansche aus legiertem Stahl während der Lagerung und des Versands

Häufig gestellte Fragen

What is the main purchasing difference between ASME B16.5 und B16.47?

ASME B16.5 covers NPS 1/2 durch 24, while B16.47 covers large-diameter NPS 26 durch 60 and requires a Series A or Series B choice.

Can Series A and Series B flanges mate directly?

They use different dimensional systems and generally should not be assumed interchangeable. Confirm the exact mating interface.

Why is special packing needed for large flanges?

Their mass and exposed faces increase the risk of impact, distortion and handling damage during international logistics.

Request a quotation for alloy steel flanges

Send the ASTM grade, standard and edition, NPS, Druckklasse, Flanschtyp, gegenüber, bore or pipe schedule, Menge, delivery destination and required PMI, NTE, Härte, third-party inspection and documentation.

Send Your RFQView Flange Products

Verwandte Beiträge

HeimProdukte
Suche