Keterangan
Detil Produk
310 stainless steel threaded flanges are forged or machined flanges with female pipe threads, typically used to connect threaded pipes, valves and fittings without welding. Made from high-temperature stainless steel such as ASTM A182 F310 and F310S, they provide strong oxidation resistance, good corrosion performance and dependable service in moderate to high temperature piping systems. Typical uses include chemical plants, peralatan termal, ketel uap, utility lines and marine auxiliary systems.
SASA FLANGE persediaan 310 stainless steel threaded flanges in standard and customized dimensions according to ASME, EN, DIN, Persyaratan JIS dan GB. Setiap batch dapat didukung dengan analisis kimia, pengujian mekanis, inspeksi dimensi dan pengujian PMI. EN 10204 3.1 sertifikasi, verifikasi penandaan dan ketertelusuran nomor panas penuh tersedia untuk memenuhi proyek, Persyaratan dokumentasi EPC dan pengguna akhir.
- ✓Nama Produk: 310 Flensa Berulir Baja Tahan Karat
- ✓Kelas Bahan: ASTM A182 F310 / F310S, UNS S31000 / S31008
- ✓Jenis Produk: Flensa Berulir Tempa
- ✓Fitur Utama: High temperature oxidation resistance with threaded installation for non-welded piping connections
- ✓Aplikasi: Pemrosesan kimia, pembangkit listrik, furnace piping, utilitas kelautan, water and industrial process lines
Parameter Produk
| Nama Produk | 310 Flensa Berulir Baja Tahan Karat |
| Kelas Bahan | ASTM A182 F310, ASTM A182 F310S, UNS S31000, UNS S31008, EN 1.4841, 1.4845 |
| Jenis Bahan | Baja tahan karat austenitik tahan panas |
| Formulir Produk | Flensa berulir yang ditempa / machined threaded flange |
| Rentang Ukuran | DN15 – DN600 (1/2 inci – 24 inci) |
| Kelas Tekanan | Kelas 150 – 2500 / PN10 – PN100 |
| Menyegel Wajah | Federasi Rusia, FF, RTJ |
| Perawatan Permukaan | Pengawetan, pasif, natural machined finish, protective oil for shipment |
| Standar | ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, GB/T 9119 atau spesifikasi pelanggan |
| Inspeksi | Analisis Kimia, Uji Mekanik, Tes PMI, Dimensi, Hidrostatik |
| Sertifikat | EN 10204 3.1 Sertifikat Bahan tersedia |
| Layanan Pemrosesan | Pemotongan, Pemesinan CNC, Pengeboran Khusus, Pemrosesan Ukuran Khusus |
Komposisi Kimia
Komposisi kimia berikut adalah untuk referensi ASTM A182 F310/F310S threaded flanges. Actual composition may vary slightly by heat and standard requirement. Final values shall comply with the applicable material specification, customer order and corresponding mill test certificate for each supplied batch.
| Elemen | C | Dan | M N | P | S | Kr | Di dalam | Mo | Lainnya |
|---|---|---|---|---|---|---|---|---|---|
| F310 / F310S % | 0.08 / 0.08 maks | 1.50 maks | 2.00 maks | 0.045 maks | 0.030 maks | 24.0 – 26.0 | 19.0 – 22.0 | 0.75 maks | N 0.10 maks, keseimbangan Fe |
Sifat Mekanik
Sifat mekanik dari 310 stainless steel threaded flanges depend on grade designation, solution annealing condition and section thickness. The data below is a typical reference for ASTM A182 F310 and F310S. Final tested values shall be confirmed by the material test certificate and applicable forging standard requirements.
| Nilai | Kekuatan Tarik | Kekuatan Hasil | Pemanjangan | Kekerasan | Kepadatan |
|---|---|---|---|---|---|
| ASTM A182 F310 | 515 MPa min | 205 MPa min | 30% menit | 217 HB maks | 7.9 gram/cm3 |
| ASTM A182 F310S | 515 MPa min | 205 MPa min | 30% menit | 217 HB maks | 7.9 gram/cm3 |
Tabel Ukuran Umum
| Rentang Ukuran | Kelas Tekanan | Menyegel Wajah | Bahan | Tersedianya |
|---|---|---|---|---|
| DN15 – DN50 | Kelas 150 – 600 | Federasi Rusia | ASTM A182 F310 / F310S | Saham / Produksi |
| DN65 – DN300 | Kelas 150 – 1500 | Federasi Rusia / RTJ | ASTM A182 F310 / F310S | Saham / Produksi |
| DN350 – DN600 | Kelas 150 – 2500 | Federasi Rusia / RTJ | ASTM A182 F310 / F310S | Produksi |
| DN700 – DN1500 | Kelas 150 – 900 | Federasi Rusia | ASTM A182 F310 / F310S | Dibuat Sesuai Pesanan |
Perbandingan Spesifikasi Berbeda
| Jenis | Keterangan | Penggunaan Khas |
|---|---|---|
| Flensa Berulir ASME | Female NPT threaded flange manufactured to ASME B16.5 dimensions for screwed pipe connection | Small to medium bore process piping where welding is restricted |
| ID Flensa Berulir | Internally threaded stainless steel flange produced to EN 1092-1 persyaratan dimensi | Pabrik proses Eropa, utilities and OEM equipment |
| Flensa Berulir Wajah Terangkat | Threaded flange with raised sealing face for use with standard ring gaskets | Pelayanan industri umum, jalur kimia dan utilitas |
| Flensa Berulir RTJ | Threaded flange with ring type joint groove for higher pressure sealing performance | High-pressure lines in refining, petrochemical and power applications |
Standar Setara dan Nama Internasional
310 stainless steel threaded flanges can be supplied to several international flange standards, while the material grade is matched to the nearest equivalent designation in each market. Ukuran, facing details and thread forms should always be verified during purchase, especially when converting between ASME, EN, DIN, JIS and GB systems.
| Standar / Wilayah | Kode Standar | Kelas Khas / Setara |
|---|---|---|
| Amerika Serikat | ASME B16.5 | ASTM A182 F310 / F310S, UNS S31000 / S31008 |
| Eropa | EN 1092-1 | 1.4841 / 1.4845 |
| Jerman | DIN 2527 / 2566 | X15CrNiSi25-21 / X8CrNi25-21 |
| Jepang | JIS B2220 | SUS310S |
| Cina | GB/T 9119 | 0Cr25Ni20 / 06Cr25Ni20 |
Alur Proses Produksi
SASA FLANGE controls the full manufacturing route of threaded flanges from raw material verification to final marking and packing. Parameter proses, akurasi pemesinan, thread quality and traceability are monitored to ensure reliable fit-up and compliance with project specifications.
- 1. Pemilihan Bahan Baku
- 2. Penempaan / Pemotongan
- 3. Perlakuan Panas
- 4. Pemesinan Kasar
- 5. Selesaikan Pemesinan
- 6. Pengeboran
- 7. Perawatan Permukaan
- 8. Inspeksi
- 9. Menandai
- 10. Sedang mengemas
- 11. Pengiriman
| Langkah Proses | Keterangan | Titik Kendali Mutu |
|---|---|---|
| Bahan mentah | Pilih billet atau pelat tempa bersertifikat | Sertifikat material dan ketertelusuran |
| Penempaan | Penempaan panas untuk mencapai bentuk yang dibutuhkan | Suhu penempaan dan rasio reduksi |
| Perlakuan Panas | Solution annealing or required heat treatment | Kontrol suhu dan waktu penahanan |
| permesinan | Menyegel wajah, lubang baut, benang dan dimensi | Keakuratan dimensi dan penyelesaian permukaan |
| Inspeksi | Inspeksi akhir sebelum pengiriman | Dimensi, permukaan, PMI, hidrostatik |
Inspeksi Produk
1. Pemeriksaan Komposisi Kimia
Chemical composition inspection is carried out to confirm the chromium, nikel, karbon, mangan, silikon, phosphorus and sulfur levels meet ASTM A182 F310 or F310S requirements. Positive laboratory analysis or spectrometer testing is used to verify the heat chemistry before production release, ensuring the supplied threaded flanges match the ordered stainless steel grade.
2. Pengujian Sifat Mekanik
Mechanical testing is performed on representative material to verify tensile strength, kekuatan hasil, elongation and hardness in accordance with the applicable forging standard. This confirms that 310 stainless steel threaded flanges provide the required basic strength and ductility for pressure piping service, while maintaining consistency across each manufacturing heat and production lot.
3. Inspeksi Dimensi
Pemeriksaan dimensi meliputi diameter luar, ketebalan, dimensi hub, menghadap flensa, lingkaran baut, bolt hole alignment and internal thread accuracy. Untuk flensa berulir, thread profile and engagement are especially important to ensure correct fit with matching threaded pipe. Inspection is conducted against ASME, EN, DIN, JIS, GB atau gambar pelanggan yang disetujui.
4. Pengujian PMI dan Pengujian Hidrostatis
PMI testing is available to verify the alloy grade of each flange using handheld XRF or equivalent equipment, which is important for mixed-material project control. Pengujian hidrostatik dapat diatur bila diperlukan oleh spesifikasi proyek atau kondisi perakitan. SASA FLANGE juga menyediakan EN 10204 3.1 sertifikat, inspection records and full heat number traceability.
Kemasan Produk
- ✓Kemasan Kotak Kayu: Cocok untuk produk bertekanan tinggi dan berdiameter besar
- ✓Pengepakan Palet dengan Shrink Wrap: Cocok untuk pengiriman batch dan ukuran standar
- ✓Lapisan Minyak Anti Karat + Kertas Tahan Air: Digunakan untuk perlindungan angkutan laut
- ✓Kantong Plastik Individu + Karton: Digunakan untuk perlengkapan kecil dan produk berulir
- ✓Hapus Penandaan: Nilai, ukuran, kelas tekanan, nomor panas dan nomor PO
Aplikasi
310 stainless steel threaded flanges are selected for piping systems that require high-temperature oxidation resistance together with convenient screwed installation. They are commonly used where field welding is limited, maintenance access is important or hot service conditions require a heat-resistant stainless grade with reliable corrosion performance.
| Industri | Aplikasi Khas | Mengapa Produk Ini Digunakan |
|---|---|---|
| Minyak dan Gas | Instrument air, jalur utilitas, threaded auxiliary piping and hot service small-bore systems | Memberikan ketahanan terhadap korosi, elevated-temperature capability and easy installation without welding |
| Pengolahan Kimia | Proses perpipaan, saluran gas panas, reactor auxiliaries and transfer systems | 310 stainless steel resists oxidation and many chemical atmospheres at higher temperatures |
| Pembangkit Listrik | Saluran bantu boiler, thermal equipment piping and heat recovery systems | Suitable for elevated-temperature service and maintenance-friendly threaded connections |
| Pengolahan Air | Dosis tergelincir, threaded stainless pipelines and utility process connections | Offers clean stainless construction and convenient assembly for smaller pipe systems |
| Kelautan dan Lepas Pantai | Engine room utilities, offshore modules and corrosion-exposed threaded stainless lines | Good corrosion resistance and simplified installation in restricted maintenance areas |
Mengapa Memilih SASA FLANGE?
- ✓Produsen profesional Flensa Berulir untuk proyek industri global
- ✓Ukuran yang disesuaikan, kelas tekanan dan kelas material sesuai gambar
- ✓Dukungan standar penuh: ASME, EN, DIN, JIS, GB, Spesifikasi gost dan pelanggan
- ✓Ketertelusuran material dengan kontrol nomor panas dan EN 10204 3.1 sertifikat materi
- ✓Analisis kimia, pengujian mekanis, pengujian PMI, pemeriksaan hidrostatik dan dimensi
- ✓Ketersediaan stok untuk barang standar, waktu tunggu 3-7 hari; produksi khusus 15-30 hari
- ✓Kemasan kelas ekspor untuk laut, transportasi udara dan darat
- ✓15+ pengalaman bertahun-tahun memasok 50+ negara-negara di seluruh dunia
Pertanyaan Umum
Q: Apa itu a 310 stainless steel threaded flange?
A: A 310 stainless steel threaded flange is a forged or machined flange with internal pipe threads used to connect threaded pipe and components without welding. It is made from heat-resistant stainless steel such as ASTM A182 F310 or F310S and is typically used in elevated-temperature services, perpipaan utilitas, chemical systems and maintenance-access areas.
Q: Untuk apa bahan tersedia 310 flensa berulir baja tahan karat?
A: The main materials are ASTM A182 F310 and F310S, sesuai dengan UNS S31000 dan S31008. Equivalent grades such as EN 1.4841, 1.4845, JIS SUS310S and comparable GB grades can also be supplied depending on project requirements. SASA FLANGE can provide standard or customized material selection with PMI verification and full traceability.
Q: Kelas tekanan apa yang didukung?
A: 310 stainless steel threaded flanges are commonly supplied in ASME Class 150, 300, 600, 900, 1500 Dan 2500 depending on size and design requirement. Peringkat tekanan EN dan DIN seperti PN10, PN16, PN25, PN40, PN64 and PN100 are also available. Final pressure rating should match the dimensional standard and service condition.
Q: Bisa SASA FLANGE menyediakan ukuran khusus?
A: Ya. SASA FLANGE can supply custom threaded flanges based on drawings or project specifications, termasuk pengeboran non-standar, menghadap khusus, custom thread type, special thickness and alternate stainless grades. Kami mendukung ASME, EN, DIN, Dimensi JIS dan GB, and can manufacture project-specific items for OEM, EPC dan aplikasi pemeliharaan.
Q: Sertifikat apa yang diberikan?
A: SASA FLANGE dapat menyediakan EN 10204 3.1 sertifikat material bersama dengan sertifikat uji pabrik, dimensional inspection report and marking traceability. PMI testing records are available on request, and hydrostatic testing can be arranged when required by the order or specification. Full heat number traceability is maintained throughout production and shipment.
Hubungi kami
Jika Anda mencari 310 stainless steel threaded flanges or related custom flange products, silakan hubungi SASA FLANGE dengan ukuran yang Anda butuhkan, kelas tekanan, kelas materi, standar, perawatan permukaan, kuantitas dan persyaratan inspeksi. Tim kami akan memberikan solusi teknis profesional dan penawaran harga kompetitif di dalamnya 24 jam.
- 📧 Surel: penjualan@sasaflange.com
- 📱 Ada apa: +86 13764965049
- ☎️ Telp: +86 21 52236361
- 🌐 Situs web: www.sasaflange.com













