310 หน้าแปลนเกลียวสแตนเลสสำหรับอุณหภูมิสูง

หมวดหมู่:

310 หน้าแปลนเกลียวสแตนเลสเป็นหน้าแปลนท่อเกลียวภายในที่ออกแบบมาสำหรับการเชื่อมต่อแบบเกลียวที่ไม่ต้องการการเชื่อม. ผลิตในสแตนเลสทนความร้อน ASTM A182 F310/F310S, they offer excellent oxidation resistance and reliable performance in elevated-temperature service. หน้าแปลนเหล่านี้ใช้กันอย่างแพร่หลายในกระบวนการแปรรูปทางเคมี, พลัง, ระบบเตาหลอม, marine and utility piping. SASA FLANGE วัสดุสิ้นเปลือง 310 stainless steel threaded flanges with EN 10204 3.1 ใบรับรอง, การทดสอบ PMI และการตรวจสอบย้อนกลับความร้อนเต็มรูปแบบ.

  • ✓ระดับ: มาตรฐาน ASTM A182 F310, F310S, UNS S31000, UNS S31008, 1.4841, 1.4845
  • ✓พื้นผิว: ดอง, หลงใหล, Natural Machined, Protective Oil for transit, Marked as per standard
  • ✓ข้อมูลจำเพาะ: DN15 ถึง DN600 (1/2 นิ้วถึง 24 นิ้ว), ระดับ 150 ถึง 2500, PN10 ถึง PN100

คำอธิบาย

รายละเอียดสินค้า

310 stainless steel threaded flanges are forged or machined flanges with female pipe threads, typically used to connect threaded pipes, valves and fittings without welding. Made from high-temperature stainless steel such as ASTM A182 F310 and F310S, they provide strong oxidation resistance, good corrosion performance and dependable service in moderate to high temperature piping systems. Typical uses include chemical plants, อุปกรณ์ระบายความร้อน, หม้อไอน้ำ, utility lines and marine auxiliary systems.

SASA FLANGE เสบียง 310 stainless steel threaded flanges in standard and customized dimensions according to ASME, EN, DIN, ข้อกำหนด JIS และ GB. แต่ละชุดสามารถรองรับการวิเคราะห์ทางเคมีได้, การทดสอบทางกล, การตรวจสอบมิติและการทดสอบ PMI. EN 10204 3.1 การรับรอง, มีการตรวจสอบการทำเครื่องหมายและการติดตามหมายเลขความร้อนเต็มรูปแบบเพื่อให้ตรงตามโครงการ, ข้อกำหนดด้านเอกสาร EPC และผู้ใช้ปลายทาง.

  • ✓ชื่อสินค้า: 310 หน้าแปลนเกลียวสแตนเลส
  • ✓เกรดวัสดุ: ASTM A182 F310 / F310S, UNS S31000 / S31008
  • ✓ประเภทสินค้า: Forged Threaded Flanges
  • ✓คุณสมบัติหลัก: High temperature oxidation resistance with threaded installation for non-welded piping connections
  • ✓การใช้งาน: การแปรรูปทางเคมี, โรงไฟฟ้า, furnace piping, สาธารณูปโภคทางทะเล, water and industrial process lines

พารามิเตอร์ผลิตภัณฑ์

ชื่อสินค้า 310 หน้าแปลนเกลียวสแตนเลส
เกรดวัสดุ ASTM A182 F310, ASTM A182 F310S, UNS S31000, UNS S31008, EN 1.4841, 1.4845
ประเภทวัสดุ สแตนเลสทนความร้อนออสเทนนิติก
แบบฟอร์มสินค้า หน้าแปลนเกลียวฟอร์จ / machined threaded flange
ช่วงขนาด DN15 – DN600 (1/2 นิ้ว – 24 นิ้ว)
คลาสความดัน ระดับ 150 – 2500 / PN10 – PN100
ซีลหน้า รฟ, เอฟเอฟ, RTJ
การรักษาพื้นผิว การดอง, ทู่, natural machined finish, protective oil for shipment
มาตรฐาน ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, กิกะไบต์/ที 9119 หรือข้อกำหนดของลูกค้า
การตรวจสอบ การวิเคราะห์ทางเคมี, การทดสอบทางกล, การทดสอบ PMI, มิติ, อุทกสถิต
ใบรับรอง EN 10204 3.1 มีใบรับรองวัสดุ
บริการแปรรูป การตัด, เครื่องจักรกลซีเอ็นซี, การเจาะแบบกำหนดเอง, การประมวลผลขนาดที่กำหนดเอง

องค์ประกอบทางเคมี

องค์ประกอบทางเคมีต่อไปนี้ใช้สำหรับการอ้างอิง ASTM A182 F310/F310S threaded flanges. Actual composition may vary slightly by heat and standard requirement. Final values shall comply with the applicable material specification, customer order and corresponding mill test certificate for each supplied batch.

องค์ประกอบ ค และ มน ป ส Cr ใน โม อื่น
F310 / F310S % 0.08 / 0.08 สูงสุด 1.50 สูงสุด 2.00 สูงสุด 0.045 สูงสุด 0.030 สูงสุด 24.0 – 26.0 19.0 – 22.0 0.75 สูงสุด เอ็น 0.10 สูงสุด, สมดุลของเฟ

คุณสมบัติทางกล

คุณสมบัติทางกลของ 310 stainless steel threaded flanges depend on grade designation, solution annealing condition and section thickness. The data below is a typical reference for ASTM A182 F310 and F310S. Final tested values shall be confirmed by the material test certificate and applicable forging standard requirements.

ระดับ ความต้านแรงดึง ความแข็งแรงของผลผลิต การยืดตัว ความแข็ง ความหนาแน่น
ASTM A182 F310 515 MPa ขั้นต่ำ 205 MPa ขั้นต่ำ 30% นาที 217 สูงสุด 7.9 กรัม/ซม3
ASTM A182 F310S 515 MPa ขั้นต่ำ 205 MPa ขั้นต่ำ 30% นาที 217 สูงสุด 7.9 กรัม/ซม3

ตารางขนาดทั่วไป

ช่วงขนาด คลาสความดัน ซีลหน้า วัสดุ ความพร้อมใช้งาน
DN15 – DN50 ระดับ 150 – 600 รฟ ASTM A182 F310 / F310S คลังสินค้า / การผลิต
DN65 – DN300 ระดับ 150 – 1500 รฟ / RTJ ASTM A182 F310 / F310S คลังสินค้า / การผลิต
DN350 – DN600 ระดับ 150 – 2500 รฟ / RTJ ASTM A182 F310 / F310S การผลิต
DN700 – DN1500 ระดับ 150 – 900 รฟ ASTM A182 F310 / F310S สั่งทำ

การเปรียบเทียบข้อมูลจำเพาะที่แตกต่างกัน

พิมพ์ คำอธิบาย การใช้งานทั่วไป
หน้าแปลนเกลียว ASME Female NPT threaded flange manufactured to ASME B16.5 dimensions for screwed pipe connection Small to medium bore process piping where welding is restricted
EN หน้าแปลนเกลียว Internally threaded stainless steel flange produced to EN 1092-1 ข้อกำหนดด้านมิติ โรงงานกระบวนการของยุโรป, utilities and OEM equipment
Raised Face Threaded Flange Threaded flange with raised sealing face for use with standard ring gaskets บริการอุตสาหกรรมทั่วไป, สายเคมีและสาธารณูปโภค
หน้าแปลนเกลียว RTJ Threaded flange with ring type joint groove for higher pressure sealing performance High-pressure lines in refining, petrochemical and power applications

มาตรฐานที่เทียบเท่าและชื่อสากล

310 stainless steel threaded flanges can be supplied to several international flange standards, while the material grade is matched to the nearest equivalent designation in each market. ขนาด, facing details and thread forms should always be verified during purchase, especially when converting between ASME, EN, DIN, ระบบ JIS และ GB.

มาตรฐาน / ภูมิภาค รหัสมาตรฐาน เกรดทั่วไป / เทียบเท่า
สหรัฐอเมริกา ASME B16.5 ASTM A182 F310 / F310S, UNS S31000 / S31008
ยุโรป EN 1092-1 1.4841 / 1.4845
เยอรมนี DIN 2527 / 2566 X15CrNiSi25-21 / X8CrNi25-21
ญี่ปุ่น JIS B2220 SUS310S
จีน กิกะไบต์/ที 9119 0Cr25Ni20 / 06Cr25Ni20

ผังกระบวนการผลิต

SASA FLANGE controls the full manufacturing route of threaded flanges from raw material verification to final marking and packing. พารามิเตอร์กระบวนการ, ความแม่นยำของเครื่องจักร, thread quality and traceability are monitored to ensure reliable fit-up and compliance with project specifications.

  • 1. การคัดเลือกวัตถุดิบ
  • 2. การตีขึ้นรูป / การตัด
  • 3. การรักษาความร้อน
  • 4. การกลึงหยาบ
  • 5. เสร็จสิ้นการตัดเฉือน
  • 6. การเจาะ
  • 7. การรักษาพื้นผิว
  • 8. การตรวจสอบ
  • 9. การทำเครื่องหมาย
  • 10. การบรรจุ
  • 11. จัดส่ง
ขั้นตอนกระบวนการ คำอธิบาย จุดควบคุมคุณภาพ
วัตถุดิบ เลือกเหล็กแท่งหรือเพลทปลอมที่ผ่านการรับรอง ใบรับรองวัสดุและการตรวจสอบย้อนกลับ
การตีขึ้นรูป การตีขึ้นรูปร้อนเพื่อให้ได้รูปทรงที่ต้องการ อุณหภูมิการตีและอัตราส่วนการลด
การรักษาความร้อน Solution annealing or required heat treatment ควบคุมอุณหภูมิและเวลาในการถือครอง
เครื่องจักรกล ซีลหน้า, รูสลักเกลียว, เธรดและขนาด ความแม่นยำของมิติและการตกแต่งพื้นผิว
การตรวจสอบ การตรวจสอบขั้นสุดท้ายก่อนจัดส่ง มิติ, พื้นผิว, พีเอ็มไอ, อุทกสถิต

การตรวจสอบผลิตภัณฑ์

1. การตรวจสอบองค์ประกอบทางเคมี

มีการตรวจสอบองค์ประกอบทางเคมีเพื่อยืนยันโครเมียม, นิกเกิล, คาร์บอน, แมงกานีส, ซิลิคอน, phosphorus and sulfur levels meet ASTM A182 ข้อกำหนดของ F310 หรือ F310S. Positive laboratory analysis or spectrometer testing is used to verify the heat chemistry before production release, ensuring the supplied threaded flanges match the ordered stainless steel grade.

2. การทดสอบคุณสมบัติทางกล

Mechanical testing is performed on representative material to verify tensile strength, ความแข็งแรงของผลผลิต, elongation and hardness in accordance with the applicable forging standard. This confirms that 310 stainless steel threaded flanges provide the required basic strength and ductility for pressure piping service, while maintaining consistency across each manufacturing heat and production lot.

3. การตรวจสอบมิติ

การตรวจสอบมิติรวมถึงเส้นผ่านศูนย์กลางภายนอกด้วย, ความหนา, ขนาดฮับ, หันหน้าไปทางหน้าแปลน, วงกลมสายฟ้า, bolt hole alignment and internal thread accuracy. สำหรับหน้าแปลนเกลียว, thread profile and engagement are especially important to ensure correct fit with matching threaded pipe. Inspection is conducted against ASME, EN, DIN, JIS, GB หรือภาพวาดของลูกค้าที่ได้รับอนุมัติ.

4. การทดสอบ PMI และการทดสอบอุทกสถิต

PMI testing is available to verify the alloy grade of each flange using handheld XRF or equivalent equipment, which is important for mixed-material project control. สามารถจัดเตรียมการทดสอบอุทกสถิตได้เมื่อจำเป็นตามข้อกำหนดของโครงการหรือสภาพการประกอบ. SASA FLANGE นอกจากนี้ยังมี EN 10204 3.1 ใบรับรอง, inspection records and full heat number traceability.

บรรจุภัณฑ์สินค้า

  • ✓บรรจุภัณฑ์กล่องไม้: เหมาะสำหรับผลิตภัณฑ์ที่มีแรงดันสูงและมีเส้นผ่านศูนย์กลางขนาดใหญ่
  • ✓การบรรจุพาเลทด้วยฟิล์มหด: เหมาะสำหรับการจัดส่งเป็นชุดและขนาดมาตรฐาน
  • ✓เคลือบน้ำมันป้องกันสนิม + กระดาษกันน้ำ: ใช้สำหรับการป้องกันการขนส่งทางทะเล
  • ✓ถุงพลาสติกส่วนบุคคล + กล่องกระดาษ: ใช้สำหรับอุปกรณ์ขนาดเล็กและผลิตภัณฑ์เกลียว
  • ✓ล้างเครื่องหมาย: ระดับ, ขนาด, ระดับความดัน, หมายเลขความร้อนและหมายเลข PO

การใช้งาน

310 stainless steel threaded flanges are selected for piping systems that require high-temperature oxidation resistance together with convenient screwed installation. They are commonly used where field welding is limited, maintenance access is important or hot service conditions require a heat-resistant stainless grade with reliable corrosion performance.

อุตสาหกรรม การใช้งานทั่วไป เหตุใดจึงใช้ผลิตภัณฑ์นี้
น้ำมันและก๊าซ Instrument air, สายสาธารณูปโภค, threaded auxiliary piping and hot service small-bore systems ให้ความต้านทานการกัดกร่อน, elevated-temperature capability and easy installation without welding
การแปรรูปทางเคมี ท่อกระบวนการ, hot gas lines, reactor auxiliaries and transfer systems 310 stainless steel resists oxidation and many chemical atmospheres at higher temperatures
การผลิตไฟฟ้า สายเสริมหม้อไอน้ำ, thermal equipment piping and heat recovery systems Suitable for elevated-temperature service and maintenance-friendly threaded connections
การบำบัดน้ำ การลื่นไถลของยา, threaded stainless pipelines and utility process connections Offers clean stainless construction and convenient assembly for smaller pipe systems
ทะเลและนอกชายฝั่ง Engine room utilities, offshore modules and corrosion-exposed threaded stainless lines Good corrosion resistance and simplified installation in restricted maintenance areas

ทำไมต้องเลือก SASA FLANGE?

  • ✓ผู้ผลิตมืออาชีพของหน้าแปลนเกลียวสำหรับโครงการอุตสาหกรรมระดับโลก
  • ✓ขนาดที่กำหนดเอง, ระดับความดันและเกรดวัสดุตามแบบ
  • ✓การสนับสนุนมาตรฐานเต็มรูปแบบ: ASME, EN, DIN, JIS, กิกะไบต์, GOST และข้อกำหนดของลูกค้า
  • ✓การตรวจสอบย้อนกลับของวัสดุด้วยการควบคุมจำนวนความร้อนและ EN 10204 3.1 ใบรับรองวัสดุ
  • ✓การวิเคราะห์ทางเคมี, การทดสอบทางกล, การทดสอบ PMI, การตรวจสอบอุทกสถิตและมิติ
  • ✓ความพร้อมในสต็อกสำหรับสินค้ามาตรฐาน, เวลานำ 3-7 วัน; การผลิตที่กำหนดเอง 15-30 วัน
  • ✓บรรจุภัณฑ์เกรดส่งออกสำหรับทะเล, การขนส่งทางอากาศและทางบก
  • ✓15+ ประสบการณ์หลายปีในการจัดหา 50+ ประเทศทั่วโลก

คำถามที่พบบ่อย

ถาม: ก.คืออะไร 310 stainless steel threaded flange?

ก: ก 310 stainless steel threaded flange is a forged or machined flange with internal pipe threads used to connect threaded pipe and components without welding. It is made from heat-resistant stainless steel such as ASTM A182 F310 or F310S and is typically used in elevated-temperature services, ท่อสาธารณูปโภค, chemical systems and maintenance-access areas.

ถาม: มีวัสดุอะไรบ้าง 310 หน้าแปลนเกลียวสแตนเลส?

ก: The main materials are ASTM A182 F310 and F310S, สอดคล้องกับ UNS S31000 และ S31008. Equivalent grades such as EN 1.4841, 1.4845, JIS SUS310S and comparable GB grades can also be supplied depending on project requirements. SASA FLANGE can provide standard or customized material selection with PMI verification and full traceability.

ถาม: รองรับคลาสแรงดันใด?

ก: 310 stainless steel threaded flanges are commonly supplied in ASME Class 150, 300, 600, 900, 1500 และ 2500 depending on size and design requirement. พิกัดแรงดัน EN และ DIN เช่น PN10, PN16, PN25, PN40, PN64 และ PN100 ก็มีจำหน่ายเช่นกัน. Final pressure rating should match the dimensional standard and service condition.

ถาม: สามารถ SASA FLANGE จัดหาขนาดที่กำหนดเอง?

ก: ใช่. SASA FLANGE can supply custom threaded flanges based on drawings or project specifications, รวมถึงการเจาะที่ไม่ได้มาตรฐาน, หันหน้าไปทางพิเศษ, custom thread type, special thickness and alternate stainless grades. เราสนับสนุน ASME, EN, DIN, ขนาด JIS และ GB, and can manufacture project-specific items for OEM, การใช้งาน EPC และการบำรุงรักษา.

ถาม: มีใบรับรองอะไรบ้าง?

ก: SASA FLANGE สามารถให้ได้ EN 10204 3.1 ใบรับรองวัสดุพร้อมกับใบรับรองการทดสอบโรงงาน, dimensional inspection report and marking traceability. PMI testing records are available on request, and hydrostatic testing can be arranged when required by the order or specification. Full heat number traceability is maintained throughout production and shipment.

ติดต่อเรา

หากคุณกำลังมองหา 310 stainless steel threaded flanges or related custom flange products, กรุณาติดต่อ SASA FLANGE ด้วยขนาดที่คุณต้องการ, ระดับความดัน, เกรดวัสดุ, มาตรฐาน, การรักษาพื้นผิว, ข้อกำหนดด้านปริมาณและการตรวจสอบ. ทีมงานของเราจะจัดหาโซลูชั่นทางเทคนิคระดับมืออาชีพและเสนอราคาที่แข่งขันได้ภายใน 24 ชั่วโมง.

  • 📧 อีเมล: sales@sasaflange.com
  • 📱 วอตส์แอป: +86 13764965049
  • ☎️โทร: +86 21 52236361
  • 🌐 เว็บไซต์: www.sasaflange.com

ฝากข้อความของคุณ

    ส่งขนาดของคุณ, วัสดุ, มาตรฐานและปริมาณ. เราจะตอบกลับภายใน 24 ชั่วโมง.

    อัพโหลดรูปภาพ / การวาดภาพ (ไม่จำเป็น)

    ได้รับการยอมรับ: JPG, PNG, WebP หรือ PDF. ขนาดไฟล์สูงสุด: 5 เอ็มบี.