وصف
تفاصيل المنتج
310 stainless steel threaded flanges are forged or machined flanges with female pipe threads, typically used to connect threaded pipes, valves and fittings without welding. Made from high-temperature stainless steel such as ASTM A182 F310 and F310S, they provide strong oxidation resistance, good corrosion performance and dependable service in moderate to high temperature piping systems. Typical uses include chemical plants, المعدات الحرارية, غلايات, utility lines and marine auxiliary systems.
SASA FLANGE لوازم 310 stainless steel threaded flanges in standard and customized dimensions according to ASME, EN, DIN, متطلبات JIS وGB. يمكن دعم كل دفعة بالتحليل الكيميائي, الاختبار الميكانيكي, فحص الأبعاد واختبار PMI. EN 10204 3.1 شهادة, التحقق من العلامات والتتبع الكامل لرقم الحرارة متاح لتلبية المشروع, EPC and end-user documentation requirements.
- ✓اسم المنتج: 310 الشفاه الملولبة من الفولاذ المقاوم للصدأ
- ✓درجة المادة: ASTM A182 F310 / F310S, UNS S31000 / S31008
- ✓نوع المنتج: الشفاه الخيوط مزورة
- ✓الميزة الرئيسية: High temperature oxidation resistance with threaded installation for non-welded piping connections
- ✓التطبيقات: المعالجة الكيميائية, محطات توليد الطاقة, furnace piping, المرافق البحرية, water and industrial process lines
معلمات المنتج
| اسم المنتج | 310 الشفاه الملولبة من الفولاذ المقاوم للصدأ |
| درجة المادة | ASTM A182 F310, ASTM A182 F310S, UNS S31000, UNS S31008, EN 1.4841, 1.4845 |
| نوع المادة | Austenitic heat-resistant stainless steel |
| نموذج المنتج | Forged threaded flange / machined threaded flange |
| نطاق الحجم | DN15 – DN600 (1/2 بوصة – 24 بوصة) |
| فئة الضغط | فصل 150 – 2500 / PN10 – PN100 |
| وجه الختم | الترددات اللاسلكية, FF, آر تي جيه |
| المعالجة السطحية | تخليل, التخميل, natural machined finish, protective oil for shipment |
| معيار | ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, جيجابايت/ت 9119 أو مواصفات العملاء |
| تقتيش | التحليل الكيميائي, اختبار ميكانيكي, اختبار مؤشر مديري المشتريات (PMI)., الأبعاد, الهيدروستاتيكي |
| شهادة | EN 10204 3.1 شهادة المواد المتاحة |
| خدمة المعالجة | قطع, التصنيع باستخدام الحاسب الآلي, الحفر المخصص, معالجة الحجم المخصص |
التركيب الكيميائي
التركيب الكيميائي التالي هو للإشارة إلى ASTM A182 F310/F310S threaded flanges. Actual composition may vary slightly by heat and standard requirement. Final values shall comply with the applicable material specification, customer order and corresponding mill test certificate for each supplied batch.
| عنصر | ج | و | من | ص | س | كر | في | شهر | آخر |
|---|---|---|---|---|---|---|---|---|---|
| F310 / F310S % | 0.08 / 0.08 الأعلى | 1.50 الأعلى | 2.00 الأعلى | 0.045 الأعلى | 0.030 الأعلى | 24.0 – 26.0 | 19.0 – 22.0 | 0.75 الأعلى | ن 0.10 الأعلى, توازن الحديد |
الخواص الميكانيكية
الخواص الميكانيكية 310 stainless steel threaded flanges depend on grade designation, solution annealing condition and section thickness. The data below is a typical reference for ASTM A182 F310 and F310S. Final tested values shall be confirmed by the material test certificate and applicable forging standard requirements.
| درجة | قوة الشد | قوة العائد | استطالة | صلابة | كثافة |
|---|---|---|---|---|---|
| ASTM A182 F310 | 515 الآلام والكروب الذهنية دقيقة | 205 الآلام والكروب الذهنية دقيقة | 30% دقيقة | 217 HB كحد أقصى | 7.9 جم/سم3 |
| ASTM A182 F310S | 515 الآلام والكروب الذهنية دقيقة | 205 الآلام والكروب الذهنية دقيقة | 30% دقيقة | 217 HB كحد أقصى | 7.9 جم/سم3 |
جدول الحجم المشترك
| نطاق الحجم | فئة الضغط | وجه الختم | مادة | التوفر |
|---|---|---|---|---|
| DN15 – DN50 | فصل 150 – 600 | الترددات اللاسلكية | ASTM A182 F310 / F310S | مخزون / إنتاج |
| DN65 – DN300 | فصل 150 – 1500 | الترددات اللاسلكية / آر تي جيه | ASTM A182 F310 / F310S | مخزون / إنتاج |
| DN350 – DN600 | فصل 150 – 2500 | الترددات اللاسلكية / آر تي جيه | ASTM A182 F310 / F310S | إنتاج |
| DN700 – DN1500 | فصل 150 – 900 | الترددات اللاسلكية | ASTM A182 F310 / F310S | صنع حسب الطلب |
مقارنة المواصفات المختلفة
| يكتب | وصف | الاستخدام النموذجي |
|---|---|---|
| ASME الخيوط شفة | Female NPT threaded flange manufactured to ASME B16.5 dimensions for screwed pipe connection | Small to medium bore process piping where welding is restricted |
| AR شفة ملولبة | Internally threaded stainless steel flange produced to EN 1092-1 متطلبات الأبعاد | مصانع المعالجة الأوروبية, utilities and OEM equipment |
| Raised Face Threaded Flange | Threaded flange with raised sealing face for use with standard ring gaskets | خدمة صناعية عامة, chemical and utility lines |
| RTJ Threaded Flange | Threaded flange with ring type joint groove for higher pressure sealing performance | High-pressure lines in refining, petrochemical and power applications |
المعايير المعادلة والأسماء الدولية
310 stainless steel threaded flanges can be supplied to several international flange standards, while the material grade is matched to the nearest equivalent designation in each market. أبعاد, facing details and thread forms should always be verified during purchase, especially when converting between ASME, EN, DIN, أنظمة JIS وGB.
| معيار / منطقة | الكود القياسي | الدرجة النموذجية / مقابل |
|---|---|---|
| الولايات المتحدة الأمريكية | ASME B16.5 | ASTM A182 F310 / F310S, UNS S31000 / S31008 |
| أوروبا | EN 1092-1 | 1.4841 / 1.4845 |
| ألمانيا | DIN 2527 / 2566 | X15CrNiSi25-21 / X8CrNi25-21 |
| اليابان | JIS B2220 | SUS310S |
| الصين | جيجابايت/ت 9119 | 0Cr25Ni20 / 06Cr25Ni20 |
تدفق عملية الإنتاج
SASA FLANGE controls the full manufacturing route of threaded flanges from raw material verification to final marking and packing. معلمات العملية, دقة الآلات, thread quality and traceability are monitored to ensure reliable fit-up and compliance with project specifications.
- 1. اختيار المواد الخام
- 2. تزوير / قطع
- 3. المعالجة الحرارية
- 4. الآلات الخام
- 5. الانتهاء من الآلات
- 6. حفر
- 7. المعالجة السطحية
- 8. تقتيش
- 9. وضع العلامات
- 10. التعبئة
- 11. توصيل
| خطوة العملية | وصف | نقطة مراقبة الجودة |
|---|---|---|
| المواد الخام | حدد قطع أو ألواح تزوير معتمدة | شهادة المواد وإمكانية التتبع |
| تزوير | تزوير الساخنة لتحقيق الشكل المطلوب | تزوير درجة الحرارة ونسبة التخفيض |
| المعالجة الحرارية | Solution annealing or required heat treatment | التحكم في درجة الحرارة وعقد الوقت |
| بالقطع | وجه الختم, فتحات الترباس, المواضيع والأبعاد | دقة الأبعاد والانتهاء من السطح |
| تقتيش | التفتيش النهائي قبل الشحن | البعد, سطح, مؤشر مديري المشتريات, الهيدروستاتيكي |
فحص المنتج
1. فحص التركيب الكيميائي
Chemical composition inspection is carried out to confirm the chromium, النيكل, الكربون, المنغنيز, السيليكون, phosphorus and sulfur levels meet ASTM A182 F310 or F310S requirements. Positive laboratory analysis or spectrometer testing is used to verify the heat chemistry before production release, ensuring the supplied threaded flanges match the ordered stainless steel grade.
2. اختبار الخواص الميكانيكية
Mechanical testing is performed on representative material to verify tensile strength, قوة الخضوع, elongation and hardness in accordance with the applicable forging standard. This confirms that 310 stainless steel threaded flanges provide the required basic strength and ductility for pressure piping service, while maintaining consistency across each manufacturing heat and production lot.
3. التفتيش الأبعاد
Dimensional inspection includes outside diameter, سماكة, أبعاد المحور, مواجهة شفة, دائرة الترباس, bolt hole alignment and internal thread accuracy. For threaded flanges, thread profile and engagement are especially important to ensure correct fit with matching threaded pipe. Inspection is conducted against ASME, EN, DIN, JIS, GB أو رسومات العملاء المعتمدة.
4. اختبار PMI والاختبار الهيدروستاتيكي
PMI testing is available to verify the alloy grade of each flange using handheld XRF or equivalent equipment, which is important for mixed-material project control. يمكن ترتيب الاختبار الهيدروستاتيكي عند الحاجة إلى مواصفات المشروع أو حالة التجميع. SASA FLANGE كما يوفر EN 10204 3.1 شهادة, inspection records and full heat number traceability.
تغليف المنتج
- ✓تغليف علبة خشبية: مناسبة للمنتجات ذات الضغط العالي والقطر الكبير
- ✓التعبئة البليت مع التفاف يتقلص: مناسبة للشحنات الدفعية والأحجام القياسية
- ✓طلاء زيت مضاد للصدأ + ورق مقاوم للماء: تستخدم لحماية الشحن البحري
- ✓كيس من البلاستيك الفردي + كرتون: تستخدم للتجهيزات الصغيرة والمنتجات المترابطة
- ✓وضع علامات واضحة: درجة, مقاس, فئة الضغط, رقم الحرارة ورقم أمر الشراء
التطبيقات
310 stainless steel threaded flanges are selected for piping systems that require high-temperature oxidation resistance together with convenient screwed installation. They are commonly used where field welding is limited, maintenance access is important or hot service conditions require a heat-resistant stainless grade with reliable corrosion performance.
| صناعة | التطبيقات النموذجية | لماذا يتم استخدام هذا المنتج |
|---|---|---|
| النفط والغاز | Instrument air, خطوط المرافق, threaded auxiliary piping and hot service small-bore systems | يوفر مقاومة للتآكل, elevated-temperature capability and easy installation without welding |
| المعالجة الكيميائية | عملية الأنابيب, hot gas lines, reactor auxiliaries and transfer systems | 310 stainless steel resists oxidation and many chemical atmospheres at higher temperatures |
| توليد الطاقة | الخطوط المساعدة للغلاية, thermal equipment piping and heat recovery systems | Suitable for elevated-temperature service and maintenance-friendly threaded connections |
| معالجة المياه | Dosing skids, threaded stainless pipelines and utility process connections | Offers clean stainless construction and convenient assembly for smaller pipe systems |
| البحرية والبحرية | Engine room utilities, offshore modules and corrosion-exposed threaded stainless lines | Good corrosion resistance and simplified installation in restricted maintenance areas |
لماذا تختار SASA FLANGE?
- ✓الشركة المصنعة المهنية للحافات الملولبة للمشاريع الصناعية العالمية
- ✓حجم مخصص, فئة الضغط ودرجة المواد وفقا للرسومات
- ✓الدعم القياسي الكامل: ASME, EN, DIN, JIS, غيغابايت, GOST ومواصفات العملاء
- ✓إمكانية تتبع المواد مع التحكم في رقم الحرارة و EN 10204 3.1 شهادة المواد
- ✓التحليل الكيميائي, الاختبار الميكانيكي, اختبار مؤشر مديري المشتريات (PMI)., التفتيش الهيدروستاتيكي والأبعاد
- ✓توافر المخزون للعناصر القياسية, مهلة 3-7 أيام; إنتاج مخصص 15-30 أيام
- ✓التعبئة والتغليف للتصدير للبحر, النقل الجوي والبري
- ✓15+ سنوات من الخبرة في التوريد 50+ البلدان في جميع أنحاء العالم
التعليمات
س: ما هو 310 stainless steel threaded flange?
أ: أ 310 stainless steel threaded flange is a forged or machined flange with internal pipe threads used to connect threaded pipe and components without welding. It is made from heat-resistant stainless steel such as ASTM A182 F310 or F310S and is typically used in elevated-temperature services, أنابيب المرافق, chemical systems and maintenance-access areas.
س: What materials are available for 310 الشفاه الخيوط الفولاذ المقاوم للصدأ?
أ: The main materials are ASTM A182 F310 and F310S, المقابلة ل UNS S31000 and S31008. Equivalent grades such as EN 1.4841, 1.4845, JIS SUS310S and comparable GB grades can also be supplied depending on project requirements. SASA FLANGE can provide standard or customized material selection with PMI verification and full traceability.
س: ما هي فئة الضغط المدعومة?
أ: 310 stainless steel threaded flanges are commonly supplied in ASME Class 150, 300, 600, 900, 1500 و 2500 depending on size and design requirement. تقييمات ضغط EN وDIN مثل PN10, PN16, PN25, بي إن 40, PN64 and PN100 are also available. Final pressure rating should match the dimensional standard and service condition.
س: يستطيع SASA FLANGE توريد أحجام مخصصة?
أ: نعم. SASA FLANGE can supply custom threaded flanges based on drawings or project specifications, including non-standard drilling, مواجهة خاصة, custom thread type, special thickness and alternate stainless grades. نحن ندعم ASME, EN, DIN, أبعاد JIS وGB, and can manufacture project-specific items for OEM, EPC and maintenance applications.
س: ما هي الشهادة المقدمة?
أ: SASA FLANGE يمكن أن توفر EN 10204 3.1 شهادة المواد مع شهادة اختبار المطحنة, dimensional inspection report and marking traceability. PMI testing records are available on request, and hydrostatic testing can be arranged when required by the order or specification. Full heat number traceability is maintained throughout production and shipment.
اتصل بنا
If you are looking for 310 stainless steel threaded flanges or related custom flange products, يرجى الاتصال SASA FLANGE مع الحجم المطلوب الخاص بك, فئة الضغط, الصف المادي, معيار, المعالجة السطحية, متطلبات الكمية والتفتيش. سيقدم فريقنا حلولًا تقنية احترافية وعروض أسعار تنافسية في الداخل 24 ساعات.
- 📧 البريد الإلكتروني: sales@sasaflange.com
- 📱 واتساب: +86 13764965049
- ☎️ هاتف: +86 21 52236361
- 🌐 موقع الكتروني: www.sasaflange.com













