F11, F22 and F91 at a glance

ASTM A182/A182M covers forged or rolled alloy and stainless steel components for pressure systems. Within that broad specification, F11, F22 and F91 identify different chemistry, heat-treatment and mechanical-property requirements. A purchase order that states only “A182フランジ” is incomplete.

These descriptions are selection context, not allowable temperature limits. The permitted pressure at temperature must be taken from the adopted code and standard edition for the exact material group, サイズ, class and flange type.

How service conditions change the selection

Design pressure and temperature are only the beginning. Engineers also review creep exposure, 熱サイクル, 酸化, hydrogen service, corrosion mechanisms, start-stop frequency and the consequences of leakage. F22 may be appropriate in a 2.25Cr-1Mo refinery circuit, while F91 belongs in a system whose pipe, 継手, バルブ, weld metal and fabrication plan are built around Grade 91 冶金.

Higher alloy content does not automatically solve wet corrosion, chloride attack, sour-service limits or corrosion under insulation. Those damage mechanisms require a separate corrosion review. Likewise, pressure class cannot be selected from material grade alone; the ASME pressure-temperature rating and joint design still govern.

Fabrication and inspection differences

All three grades require positive material control and traceable heat treatment. F91 is especially sensitive to incorrect thermal history. An F91 flange can show the expected alloy chemistry during PMI yet still be unsuitable because its microstructure or hardness was altered by improper heat treatment, welding or post-weld heat treatment.

The fabrication package should align base metal, filler metal, preheat, interpass temperature, PWHT and hardness acceptance. For critical service, the inspection plan may include visual and dimensional inspection, PMI, magnetic-particle examination, ultrasonic testing, hardness mapping and third-party witness points. Each method answers a different question; none replaces the others.

RFQ checklist for ASTM A182 合金フランジ

• ASTM A182 学年, class or condition, and required edition
• ASME B16.5 サイズ, 圧力クラス, flange type and facing
• Pipe specification, schedule and weld-end transition detail
• Required heat treatment and project hardness limits
• PMI, surface NDE, UT coverage and acceptance criteria
• EN 10204 certificate type, heat-number traceability and marking
• Applicable sour-service, hydrogen-service or owner requirements

Any proposed substitution should move through formal engineering review. Similar dimensions do not make different grades technically equivalent.