When it comes to potable water systems, selecting the correct flange material is more than just an engineering decision — it’s a public health priority. The materials used in water pipelines, 継手, and flanges must meet stringent safety standards to prevent contamination, leaching, と腐食, all while maintaining mechanical strength and longevity.

それで, what flange material is best for potable water? This comprehensive guide will walk you through the ideal options, 国際規格, and key considerations when choosing flanges for drinking water distribution, treatment, and storage systems.

で SASA FLANGE, we provide flange solutions that are fully compliant with health and safety codes — trusted by water utilities, infrastructure contractors, and public service engineers worldwide.

---

Why Flange Material Matters in Potable Water Systems

フランジはパイプを接続するために使用されます, バルブ, and equipment across all segments of a potable water system — from treatment plants to underground distribution mains. The material used in these flanges must meet specific requirements:

✅ Non-toxic and non-leaching

Materials must not release harmful substances such as lead, ニッケル, or cadmium into the water.

✅ Corrosion-resistant

Flanges should withstand constant water exposure and resist rust, 穴あき, and scaling.

✅ Durable and pressure-rated

The material must maintain mechanical strength for decades under varying pressure conditions.

✅ Certifiable to drinking water standards

Acceptable materials must comply with international potable water certifications such as:

• NSF/ANSI 61 (アメリカ合衆国)

• WRAS (UK)

• DVGW (ドイツ)

• AS/NZS 4020 (Australia)

• ギガバイト/トン 17219 (中国)

---

Approved Flange Materials for Potable Water

Let’s explore the most commonly approved and recommended flange materials for potable water piping systems:

---

1. ステンレス鋼 (304l / 316l)

概要:
Stainless steel flanges are widely used for potable water due to their 優れた耐食性, non-leaching properties, そして 長寿命. Grades like 304l そして 316l are low in carbon and suitable for both cold and hot water systems.

利点:

• Long-term durability

• 衛生的でお手入れも簡単

• NSF 61 and WRAS certified (depending on source)

アプリケーション:

• Drinking water pipelines

• Pump stations

• Water treatment tanks and skids

---

2. ダクタイル鋳鉄 (Epoxy-Coated)

概要:
Ductile iron offers high strength and cost efficiency but must be coated internally and externally to prevent corrosion. Flanges made from ductile iron are typically lined with fusion-bonded epoxy (FBE) または epoxy paint that complies with drinking water standards.

利点:

• High mechanical strength

• Cost-effective for large diameters

• Approved under many national standards when coated

アプリケーション:

• Municipal pipelines

• Large valve connections

• Fire protection and water mains

---

3. Brass / Bronze (Lead-Free Alloys)

概要:
In smaller diameter systems, lead-free brass or bronze flanges 時々使用されます, especially in residential or building plumbing. They must be certified to lead-free requirements, especially in the U.S. under the Safe Drinking Water Act.

利点:

• Corrosion-resistant in neutral pH water

• Good machinability

• Suitable for fittings and small-bore piping

アプリケーション:

• Domestic plumbing

• Meter connections

• Indoor water distribution

---

4. PVC / CPVC (プラスチックフランジ)

概要:
In non-metallic piping systems, especially in residential, 灌漑, or light industrial potable water applications, plastic flanges made from PVC or CPVC may be used. These materials must also be tested and approved under drinking water safety standards.

利点:

• Corrosion-proof

• Lightweight and easy to install

• Low cost

アプリケーション:

• Water tanks

• 低圧システム

• Temporary piping lines

---

5. HDG Carbon Steel (Not Preferred)

概要:
Hot-dip galvanized (HDG) 炭素鋼 flanges are sometimes used in non-corrosive, low-purity water systems, but they are generally not recommended for critical potable water use due to the potential for zinc leaching, スケーリング, そして coating degradation 時間とともに.

Use only with proper approvals and in short-term, low-pressure, or transitional settings.

---

Flange Type Recommendations for Potable Water Systems

Regardless of the material, the following flange types are common in potable water systems:

• スリップオンフランジ: Economical and easy to align, suitable for general water lines

• ウェルドネックフランジ: For high-pressure or large-diameter lines requiring strength and leak-proof performance

• ブラインドフランジ: Used to close off pipe ends or create access points

• ねじれたフランジ: Typically used in smaller pipelines or with plastic piping

• 重ね継手フランジ: Ideal when frequent dismantling is required, such as in filters or tanks

SASA FLANGE manufactures all of these types in stainless steel and ductile iron for potable water service, with optional certifications and coatings to meet national and international safety standards.

---

Gasket and Bolt Considerations

Flange performance in potable water systems also depends on compatible sealing and fastening components:

ガスケット:

• EPDM (Ethylene Propylene Diene Monomer) gaskets are widely approved for potable water use.

• Avoid gaskets containing asbestos or industrial-grade rubbers.

ボルト:

• 使用 stainless steel bolts または zinc-coated bolts approved for potable water environments.

• Ensure the entire flange assembly is corrosion-resistant and non-leaching.

---

Certifications to Look For

When selecting flange materials for drinking water applications, always verify the following certifications:

• NSF/ANSI 61 (アメリカ合衆国)

• WRAS (UK)

• ACS (France)

• DVGW W270 (ドイツ)

• AS/NZS 4020 (Australia)

• ギガバイト/トン 17219 (中国)

SASA FLANGE provides stainless steel and epoxy-coated ductile iron flanges tested and certified according to customer region and project requirements.

---

Typical Applications for Potable Water Flanges

• Municipal water supply lines

• Underground water distribution mains

• Water treatment facilities

• Booster pump stations

• RO and UF membrane skids

• Building water systems

• Irrigation and agricultural supply

---

選ぶ理由 SASA FLANGE for Potable Water Projects?

SASA FLANGE is a leading manufacturer of high-quality flanges for waterworks and infrastructure projects worldwide. With a full range of materials and sizes, we offer:

• Stainless steel 304L / 316L flanges with potable water approval

• Ductile iron flanges with NSF-certified epoxy coatings

• Custom fabrication and pressure classes from PN10 to PN40 and Class 150 に 600

• Third-party inspection and 3.1 / 3.2 認証

• Fast global delivery and full export documentation

Whether you’re building a new water treatment plant or repairing a distribution line, SASA FLANGE provides safe, tested, and reliable flange solutions — trusted in potable water systems around the world.

---

結論

それで, what flange material is best for potable water? The answer depends on your application, プレッシャー, and regulatory requirements — but in general:

• ステンレス鋼 (304L/316L) is the gold standard for safety, 耐久性, and hygiene.

• Epoxy-coated ductile iron is ideal for large municipal and infrastructure pipelines.

• Plastic or brass flanges are suited for low-pressure and indoor applications, provided they are lead-free and certified.

No matter the material, ensure your flanges are certified for drinking water use and installed with compatible gaskets and bolts.

選ぶ SASA FLANGE for flange materials you can trust — safe for people, strong for infrastructure.