Description
Product Detail
310 stainless steel lap joint flanges are backing flanges used together with lap joint stub ends to create a flanged connection that allows easy bolt alignment and convenient dismantling during maintenance. Made from high-temperature austenitic stainless steel, these flanges offer excellent oxidation resistance, good corrosion resistance and dependable strength in elevated-temperature service. They are commonly used in chemical plants, thermal processing lines, marine piping, power generation systems and water treatment installations.
SASA FLANGE supplies 310 and 310S stainless steel lap joint flanges in standard and customized dimensions according to ASME, EN, DIN, JIS and GB requirements. Each order can be supported by chemical analysis, mechanical testing, dimensional inspection, PMI testing, EN 10204 3.1 certificate and full heat number traceability to ensure compliance for critical industrial projects.
- ✓Product Name: 310 Stainless Steel Lap Joint Flanges
- ✓Material Grade: ASTM A182 F310 / F310S, UNS S31000 / S31008
- ✓Product Type: Lap Joint Flange for use with Stub End
- ✓Main Feature: Excellent oxidation resistance, corrosion resistance and easy alignment during installation
- ✓Applications: Chemical processing, power generation, marine, exhaust systems, water treatment and industrial piping
Product Parameters
| Product Name | 310 Stainless Steel Lap Joint Flange |
| Material Grade | ASTM A182 F310, ASTM A182 F310S, UNS S31000, UNS S31008, EN 1.4841, EN 1.4845 |
| Material Type | Austenitic stainless steel |
| Product Form | Forged lap joint flange / machined plate lap joint flange |
| Size Range | DN15 – DN1200 (1/2 inch – 48 inch) |
| Pressure Class | Class 150 – 600 / PN10 – PN40 |
| Sealing Face | Flat Face (FF), Raised Face (RF), custom to match stub end design |
| Surface Treatment | Pickling, passivation, machined finish, protective oil coating for shipment |
| Standard | ASME B16.5, ASME B16.47, EN 1092-1, DIN 2642 / DIN 2673, JIS B2220, GB/T 9119 or customer specification |
| Inspection | Chemical Analysis, Mechanical Test, PMI Test, Dimensional Inspection, Visual Inspection |
| Certificate | EN 10204 3.1 Material Certificate available |
| Processing Service | Cutting, CNC Machining, Custom Drilling, Custom Size Processing |
Chemical Composition
The following chemical composition is for reference for ASTM A182 F310/F310S stainless steel flange material. Actual composition may vary slightly by grade designation, melting route and applicable standard. Final supplied chemistry shall comply with the relevant material specification and be confirmed by the mill test certificate and inspection records.
| Element | C | Si | Mn | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|---|
| F310 / UNS S31000 | 0.25 max | 1.50 max | 2.00 max | 0.045 max | 0.030 max | 24.0-26.0 | 19.0-22.0 | 0.75 max | N 0.10 max |
| F310S / UNS S31008 | 0.08 max | 1.50 max | 2.00 max | 0.045 max | 0.030 max | 24.0-26.0 | 19.0-22.0 | 0.75 max | N 0.10 max |
Mechanical Properties
Mechanical properties shown below are typical minimum values for solution-annealed 310 and 310S stainless steel forging material used for flanges. Actual results can vary according to grade, section thickness, manufacturing route and heat treatment condition. Final mechanical performance is subject to the applicable material standard, test reports and certified inspection documentation.
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | Density |
|---|---|---|---|---|---|
| ASTM A182 F310 | 515 MPa min | 205 MPa min | 30% min | 217 HB max | 7.9 g/cm3 |
| ASTM A182 F310S | 515 MPa min | 205 MPa min | 30% min | 217 HB max | 7.9 g/cm3 |
Common Size Table
| Size Range | Pressure Class | Sealing Face | Material | Availability |
|---|---|---|---|---|
| DN15 – DN50 | Class 150 – 300 | FF / RF | A182 F310 / F310S | Stock / Production |
| DN65 – DN300 | Class 150 – 600 | FF / RF | A182 F310 / F310S | Stock / Production |
| DN350 – DN600 | Class 150 – 600 | FF / RF | A182 F310 / F310S | Production |
| DN700 – DN1200 | Class 150 – 300 | FF | A182 F310 / F310S | Made to Order |
Different Specifications Comparison
| Type | Description | Typical Use |
|---|---|---|
| ASME Lap Joint Flange | Loose backing flange used with ASME B16.9 or MSS SP-43 stub end | Process piping requiring frequent dismantling and easy bolt alignment |
| EN Lap Joint Flange | Plate or forged loose flange to EN 1092-1 used with collar or stub end | European industrial piping and utility lines |
| Raised Face Lap Joint Flange | Machined flange face profile selected to suit matching system design | General plant service where controlled gasket seating is required |
| Flat Face Lap Joint Flange | Flat sealing arrangement commonly paired with lap joint stub end face | Low to medium pressure service and lined or corrosion-resistant piping systems |
Equivalent Standards and International Names
310 stainless steel lap joint flanges can be manufactured to major international flange standards and supplied with internationally recognized material equivalents. While dimensions and drilling differ by standard, equivalent material names such as ASTM A182 F310/F310S, EN 1.4841/1.4845 and related JIS or GB grades are commonly used for project matching and procurement reference.
| Standard / Region | Standard Code | Typical Grade / Equivalent |
|---|---|---|
| USA | ASME B16.5 / ASME B16.47 | ASTM A182 F310 / F310S, UNS S31000 / S31008 |
| Europe | EN 1092-1 | 1.4841 / 1.4845 |
| Germany | DIN 2642 / DIN 2673 | X15CrNi25-20 / X8CrNi25-21 |
| Japan | JIS B2220 | SUS310S |
| China | GB/T 9119 | 06Cr25Ni20 / 20Cr25Ni20 |
Production Process Flow
SASA FLANGE controls each production stage from raw material verification to final packing to ensure dimensional accuracy, material conformity and reliable service performance for stainless steel lap joint flanges.
- 1. Raw Material Selection
- 2. Forging / Cutting
- 3. Heat Treatment
- 4. Rough Machining
- 5. Finish Machining
- 6. Drilling
- 7. Surface Treatment
- 8. Inspection
- 9. Marking
- 10. Packing
- 11. Delivery
| Process Step | Description | Quality Control Point |
|---|---|---|
| Raw Material | Select certified forging billets or plates | Material certificate and traceability |
| Forging | Hot forging to achieve required shape | Forging temperature and reduction ratio |
| Heat Treatment | Solution annealing and controlled cooling | Temperature and holding time control |
| Machining | Sealing face, bolt holes, dimensions | Dimensional accuracy and surface finish |
| Inspection | Final inspection before shipment | Dimension, surface, PMI, visual verification |
Product Inspection
1. Chemical Composition Inspection
Chemical composition inspection is carried out to confirm the chromium, nickel, carbon and other alloying elements comply with ASTM A182 F310 or F310S requirements. Spectrometer analysis is used to verify the material grade before and during production, helping ensure the flange provides the intended corrosion resistance, oxidation resistance and traceable compliance with project specifications.
2. Mechanical Properties Testing
Mechanical testing verifies that the flange material meets required tensile strength, yield strength, elongation and hardness values after heat treatment. Testing is performed according to the applicable material standard and provides assurance that 310 stainless steel lap joint flanges have the strength and ductility needed for industrial piping service at ambient and elevated temperatures.
3. Dimensional Inspection
Dimensional inspection checks outside diameter, thickness, bore, bolt circle, bolt hole size, hole quantity and facing details against the selected flange standard. For lap joint flanges, close attention is given to fit-up with the stub end and free-rotating alignment, ensuring easy installation, proper bolting and reliable sealing performance in service.
4. PMI Testing and Hydrostatic Testing
PMI testing confirms positive material identification of 310 or 310S stainless steel to avoid grade mix-up in critical applications. Hydrostatic testing is generally conducted at the piping assembly or system level, while flange supply includes visual and dimensional verification. EN 10204 3.1 certificate, heat number traceability and inspection records are provided to support quality documentation requirements.
Product Packaging
- ✓Wooden Case Packaging: Suitable for high-pressure and large-diameter products
- ✓Pallet Packing with Shrink Wrap: Suitable for batch shipments and standard sizes
- ✓Anti-rust Oil Coating + Waterproof Paper: Used for ocean freight protection
- ✓Individual Plastic Bag + Carton: Used for small fittings and threaded products
- ✓Clear Marking: Grade, size, pressure class, heat number and PO number
Applications
310 stainless steel lap joint flanges are widely used in industries requiring corrosion resistance, oxidation resistance and easy maintenance access. Their loose flange design allows convenient alignment and repeated dismantling, making them suitable for process lines, utility systems and equipment connections where maintenance speed and flange rotation are important.
| Industry | Typical Applications | Why This Product Is Used |
|---|---|---|
| Oil and Gas | Auxiliary process lines, exhaust systems, non-sour utility piping | Provides corrosion resistance and easier bolt alignment during maintenance |
| Chemical Processing | Acidic or oxidizing service lines, storage and transfer piping | High chromium and nickel content supports corrosion and heat resistance |
| Power Generation | Boiler auxiliary piping, hot gas ducts, thermal processing connections | Performs well in elevated temperature environments |
| Water Treatment | Demineralized water lines, chemical dosing systems, skid piping | Offers clean surface condition and reliable service life |
| Marine and Offshore | Corrosion-resistant piping, equipment tie-ins, deck utility systems | Loose flange design simplifies installation in confined spaces |
Why Choose SASA FLANGE?
- ✓Professional manufacturer of Lap Joint Flange for global industrial projects
- ✓Customized size, pressure class and material grade according to drawings
- ✓Full standard support: ASME, EN, DIN, JIS, GB, GOST and customer specifications
- ✓Material traceability with heat number control and EN 10204 3.1 material certificate
- ✓Chemical analysis, mechanical testing, PMI testing, hydrostatic and dimensional inspection
- ✓Stock availability for standard items, lead time 3-7 days; custom production 15-30 days
- ✓Export-grade packaging for sea, air and land transportation
- ✓15+ years experience supplying 50+ countries worldwide
FAQ
Q: What is a 310 stainless steel lap joint flange?
A: A 310 stainless steel lap joint flange is a loose backing flange used together with a stub end to form a flanged piping connection. Unlike weld neck or slip on flanges, it rotates freely around the stub end, making bolt hole alignment easier. It is chosen for systems requiring frequent dismantling, good corrosion resistance and elevated-temperature performance.
Q: What materials are available for 310 stainless steel lap joint flanges?
A: SASA FLANGE mainly supplies ASTM A182 F310 and F310S lap joint flanges, corresponding to UNS S31000 and S31008. Equivalent international grades such as EN 1.4841, EN 1.4845, SUS310S and comparable GB grades can also be produced. Material selection depends on operating temperature, corrosion environment, standard requirement and customer project specification.
Q: What pressure class is supported?
A: For 310 stainless steel lap joint flanges, the common supply range is ASME Class 150, 300 and 600, with EN pressure ratings such as PN10, PN16, PN25 and PN40. Larger diameters are usually made in lower pressure ratings due to lap joint design practice. Higher ratings can be reviewed according to size, standard and project requirements.
Q: Can SASA FLANGE supply custom sizes?
A: Yes. SASA FLANGE can produce custom lap joint flanges based on drawings or technical specifications, including non-standard outside diameter, bore size, bolt hole drilling, thickness and marking requirements. We can also match the flange to specific stub end dimensions, sealing face details and international standards such as ASME, EN, DIN, JIS and GB.
Q: What certificate is provided?
A: SASA FLANGE can provide EN 10204 3.1 material certificate together with mill test report, heat number traceability and inspection records. Additional documentation such as PMI test results, dimensional inspection report and mechanical test report can be supplied as required. Hydrostatic testing is typically system-based, but supporting quality documents for flange compliance are available.
Contact Us
If you are looking for 310 stainless steel flanges or related custom flange products, please contact SASA FLANGE with your required size, pressure class, material grade, standard, surface treatment, quantity and inspection requirements. Our team will provide professional technical solutions and competitive quotation within 24 hours.
- 📧 Email: sales@sasaflange.com
- 📱 WhatsApp: +86 13764965049
- ☎️ Tel: +86 21 52236361
- 🌐 Website: www.sasaflange.com








