وصف
تفاصيل المنتج
Inconel threaded flanges are forged flanges with internal threads that connect to externally threaded pipe without field welding. They are widely used in hazardous, corrosive or high-temperature piping systems where maintenance access, fire risk reduction or installation flexibility is important. Typical services include chemical lines, instrumentation connections, المرافق البحرية, steam systems and process piping handling chlorides, acids and oxidizing media.
SASA FLANGE supplies threaded flanges in standard and customized dimensions according to ASME B16.5, EN 1092-1, DIN, متطلبات JIS وGB. يمكن دعم كل طلب بالتحليل الكيميائي, الاختبار الميكانيكي, فحص الأبعاد, اختبار مؤشر مديري المشتريات (PMI)., التحقق من وجه الختم, EN 10204 3.1 شهادة وإمكانية تتبع رقم الحرارة الكامل لضمان أداء موثوق به في الخدمة الصناعية الهامة.
- ✓اسم المنتج: الشفاه الملولبة من إنكونيل
- ✓درجة المادة: إنكونيل 600, 625, 718, Incoloy 800/800H
- ✓نوع المنتج: Forged threaded pipe flanges
- ✓الميزة الرئيسية: مقاومة ممتازة للأكسدة, corrosion resistance and high-temperature strength without welding requirement
- ✓التطبيقات: النفط والغاز, المعالجة الكيميائية, توليد الطاقة, البحرية, أنظمة معالجة المياه والبحر
معلمات المنتج
| اسم المنتج | الشفاه الملولبة من إنكونيل |
| درجة المادة | إنكونيل 600, إنكونيل 625, إنكونيل 718, إنكولوي 800, إنكولوي 800H |
| نوع المادة | Nickel-based alloy forged material |
| نموذج المنتج | شفة مترابطة, screwed flange, female threaded forged flange |
| نطاق الحجم | DN15 – DN600 (1/2 بوصة – 24 بوصة) |
| فئة الضغط | فصل 150 – 2500 / PN16 – PN100 |
| وجه الختم | الترددات اللاسلكية, FF, آر تي جيه |
| المعالجة السطحية | آلة طبيعية, مخلل, تخميله, تنظيفها وحمايتها للتصدير |
| معيار | ASME B16.5, EN 1092-1, DIN, JIS B2220, جيجابايت/ت 9119 أو مواصفات العملاء |
| تقتيش | التحليل الكيميائي, اختبار ميكانيكي, اختبار مؤشر مديري المشتريات (PMI)., الأبعاد, الهيدروستاتيكي |
| شهادة | EN 10204 3.1 شهادة المواد المتاحة |
| خدمة المعالجة | قطع, التصنيع باستخدام الحاسب الآلي, الحفر المخصص, معالجة الحجم المخصص |
التركيب الكيميائي
The following chemical composition is a representative reference for commonly supplied Inconel 625 الشفاه الخيوط. Final chemistry depends on the selected alloy grade, applicable ASTM or EN material standard, and the original mill test certificate. SASA FLANGE verifies incoming material by documentation review and PMI testing to ensure conformance before machining and shipment.
| عنصر | ج | و | من | ص | س | كر | في | شهر | آخر |
|---|---|---|---|---|---|---|---|---|---|
| إنكونيل 625 محتوى % | 0.10 الأعلى | 0.50 الأعلى | 0.50 الأعلى | 0.015 الأعلى | 0.015 الأعلى | 20.0 – 23.0 | 58.0 دقيقة | 8.0 – 10.0 | ملحوظة + تا 3.15 – 4.15, الحديد 5.0 الأعلى |
الخواص الميكانيكية
Mechanical properties shown below are typical minimum values for widely used Inconel grades in forged flange applications. Actual values can vary depending on alloy grade, solution annealing or age-hardening condition, تزوير نسبة التخفيض وسمك القسم. For project supply, SASA FLANGE provides test reports based on the actual heat and product condition specified in the order.
| درجة | قوة الشد | قوة العائد | استطالة | صلابة | كثافة |
|---|---|---|---|---|---|
| إنكونيل 600 | 550 الآلام والكروب الذهنية دقيقة | 240 الآلام والكروب الذهنية دقيقة | 30% دقيقة | 200 HB كحد أقصى | 8.47 جم/سم3 |
| إنكونيل 625 | 827 الآلام والكروب الذهنية دقيقة | 414 الآلام والكروب الذهنية دقيقة | 30% دقيقة | 240 HB كحد أقصى | 8.44 جم/سم3 |
جدول الحجم المشترك
| نطاق الحجم | فئة الضغط | وجه الختم | مادة | التوفر |
|---|---|---|---|---|
| DN15 – DN50 | فصل 150 – 600 | الترددات اللاسلكية | إنكونيل 600 / 625 | مخزون / إنتاج |
| DN65 – DN300 | فصل 150 – 1500 | الترددات اللاسلكية / آر تي جيه | إنكونيل 600 / 625 / 800ح | مخزون / إنتاج |
| DN350 – DN600 | فصل 150 – 2500 | الترددات اللاسلكية / آر تي جيه | إنكونيل 625 / 718 | إنتاج |
| DN700 – DN1500 | فصل 150 – 900 | الترددات اللاسلكية | Custom nickel alloy grades | صنع حسب الطلب |
مقارنة المواصفات المختلفة
| يكتب | وصف | الاستخدام النموذجي |
|---|---|---|
| ASME الخيوط شفة | Flange with NPT threaded bore manufactured to ASME B16.5 أبعاد | Small to medium bore high-pressure piping without welding |
| AR شفة ملولبة | شفة ملولبة تم إنتاجها وفقًا لـ EN 1092-1 pressure and dimensional requirements | European process plants and utility piping systems |
| شفة الترددات اللاسلكية | Raised face design for use with standard ring gaskets | خدمة صناعية عامة, chemical and utility lines |
| RTJ Threaded Flange | Ring type joint face for metallic gasket sealing in severe service | ارتفاع الضغط, high-temperature and critical hydrocarbon systems |
المعايير المعادلة والأسماء الدولية
Inconel threaded flanges can be manufactured to major international flange standards, while the alloy itself is identified by UNS, ASTM or EN material designations. قد تختلف التسمية المكافئة حسب المنطقة, but the final supplied product is matched to the requested dimensional standard, تصنيف الضغط, thread type and alloy grade stated in the purchase order.
| معيار / منطقة | الكود القياسي | الدرجة النموذجية / مقابل |
|---|---|---|
| الولايات المتحدة الأمريكية | ASME B16.5 | UNS N06600, N06625, N07718 threaded flanges |
| أوروبا | EN 1092-1 | 2.4816, 2.4856, 2.4668 nickel alloy flange equivalents |
| ألمانيا | DIN 2566 | DIN threaded flanges in Werkstoff 2.4816 / 2.4856 |
| اليابان | JIS B2220 | Nickel alloy threaded flanges in equivalent Inconel grades |
| الصين | جيجابايت/ت 9119 | Nickel alloy threaded flanges to UNS N06600 / N06625 equivalents |
تدفق عملية الإنتاج
SASA FLANGE applies controlled manufacturing from raw material verification to final packing to ensure threaded flanges meet dimensional, metallurgical and pressure service requirements for critical industrial applications.
- 1. اختيار المواد الخام
- 2. تزوير / قطع
- 3. المعالجة الحرارية
- 4. الآلات الخام
- 5. الانتهاء من الآلات
- 6. حفر
- 7. المعالجة السطحية
- 8. تقتيش
- 9. وضع العلامات
- 10. التعبئة
- 11. توصيل
| خطوة العملية | وصف | نقطة مراقبة الجودة |
|---|---|---|
| المواد الخام | حدد قطع أو ألواح تزوير معتمدة | شهادة المواد وإمكانية التتبع |
| تزوير | تزوير الساخنة لتحقيق الشكل المطلوب | تزوير درجة الحرارة ونسبة التخفيض |
| المعالجة الحرارية | Solution annealing or age hardening as required by alloy grade | التحكم في درجة الحرارة وعقد الوقت |
| بالقطع | وجه الختم, internal thread, فتحات الترباس, أبعاد | دقة الأبعاد والانتهاء من السطح |
| تقتيش | التفتيش النهائي قبل الشحن | البعد, سطح, مؤشر مديري المشتريات, الهيدروستاتيكي |
فحص المنتج
1. فحص التركيب الكيميائي
Chemical composition inspection is performed by reviewing the raw material mill certificate and, حيثما كان ذلك مطلوبا, laboratory analysis to confirm conformity with the specified Inconel grade. عناصر صناعة السبائك الرئيسية مثل النيكل, الكروم, molybdenum and niobium are checked against the applicable standard to ensure corrosion resistance, heat resistance and correct material identity before production starts.
2. اختبار الخواص الميكانيكية
Mechanical testing verifies that the forged alloy meets the required tensile strength, قوة الخضوع, elongation and hardness values for the selected grade and heat treatment condition. These tests help confirm that the threaded flange can withstand installation loads, internal pressure and temperature fluctuations encountered in demanding process piping and pressure service.
3. التفتيش الأبعاد
يغطي فحص الأبعاد القطر الخارجي, سماكة, hub profile where applicable, حجم التجويف, دقة الخيط, دائرة ثقب الترباس, bolt hole diameter and sealing face finish. SASA FLANGE also checks raised face or RTJ geometry to ensure proper gasket seating and compatibility with mating flanges according to ASME, EN, DIN, JIS or GB drawings.
4. اختبار PMI والاختبار الهيدروستاتيكي
PMI testing is carried out to positively identify the nickel alloy grade and prevent material mix-up in critical applications. يمكن ترتيب الاختبار الهيدروستاتيكي كجزء من الأنابيب المجمعة أو متطلبات المشروع الخاصة. EN 10204 3.1 شهادة, إمكانية تتبع رقم الحرارة, dimensional reports and inspection records are supplied to support quality assurance and project documentation.
تغليف المنتج
- ✓تغليف علبة خشبية: مناسبة للمنتجات ذات الضغط العالي والقطر الكبير
- ✓التعبئة البليت مع التفاف يتقلص: مناسبة للشحنات الدفعية والأحجام القياسية
- ✓طلاء زيت مضاد للصدأ + ورق مقاوم للماء: تستخدم لحماية الشحن البحري
- ✓كيس من البلاستيك الفردي + كرتون: تستخدم للتجهيزات الصغيرة والمنتجات المترابطة
- ✓وضع علامات واضحة: درجة, مقاس, فئة الضغط, رقم الحرارة ورقم أمر الشراء
التطبيقات
Inconel threaded flanges are selected for severe operating environments where excellent resistance to heat, أكسدة, chloride attack and aggressive process media is required. Their non-welded threaded connection makes them especially useful for maintenance-friendly systems, small-bore high-pressure piping and locations where hot work must be minimized during installation or repair.
| صناعة | التطبيقات النموذجية | لماذا يتم استخدام هذا المنتج |
|---|---|---|
| النفط والغاز | خطوط الأجهزة, انزلاقات الحقن الكيميائي, أنابيب المرافق البحرية, الأنظمة المساعدة للخدمة الحامضة | Provides high corrosion resistance and allows threaded installation where welding is restricted |
| المعالجة الكيميائية | خطوط معالجة الأحماض, chlorinated media service, مساعدي المفاعل, اتصالات المبادلات الحرارية | Excellent resistance to oxidizing and reducing environments with reliable sealing |
| توليد الطاقة | الأنظمة المساعدة للغلايات, steam tracing, turbine support piping, high-temperature process lines | Maintains strength and oxidation resistance at elevated temperatures |
| معالجة المياه | وحدات تحلية المياه, dosing skids, brine handling and aggressive chemical treatment systems | Resists chloride-rich media and supports long service life |
| البحرية والبحرية | Seawater utilities, أنابيب المنصة, fire-safe maintenance areas, corrosive marine atmospheres | Performs well in salt-laden environments and supports easier field replacement |
لماذا تختار SASA FLANGE?
- ✓الشركة المصنعة المهنية للحافات الملولبة للمشاريع الصناعية العالمية
- ✓حجم مخصص, فئة الضغط ودرجة المواد وفقا للرسومات
- ✓الدعم القياسي الكامل: ASME, EN, DIN, JIS, غيغابايت, GOST ومواصفات العملاء
- ✓إمكانية تتبع المواد مع التحكم في رقم الحرارة و EN 10204 3.1 شهادة المواد
- ✓التحليل الكيميائي, الاختبار الميكانيكي, اختبار مؤشر مديري المشتريات (PMI)., التفتيش الهيدروستاتيكي والأبعاد
- ✓توافر المخزون للعناصر القياسية, مهلة 3-7 أيام; إنتاج مخصص 15-30 أيام
- ✓التعبئة والتغليف للتصدير للبحر, النقل الجوي والبري
- ✓15+ سنوات من الخبرة في التوريد 50+ البلدان في جميع أنحاء العالم
التعليمات
س: What is an Inconel threaded flange?
أ: An Inconel threaded flange is a forged nickel alloy flange with an internal pipe thread, usually NPT or BSP as specified, allowing connection to threaded pipe without welding. It is used in corrosive, high-temperature or hazardous environments where Inconel’s alloy performance is needed and where maintenance convenience or reduced hot work is important.
س: What materials are available for Inconel threaded flanges?
أ: SASA FLANGE commonly supplies Inconel 600, إنكونيل 625, إنكونيل 718 and Incoloy 800/800H for threaded flange production. اختيار المواد يعتمد على درجة الحرارة, بيئة التآكل, mechanical strength requirement and project specification. Equivalent UNS or EN alloy numbers can also be supplied, subject to raw material availability and standard compliance.
س: ما هي فئة الضغط المدعومة?
أ: Inconel threaded flanges are typically available in ASME Class 150, 300, 600, 900, 1500 و 2500, depending on size and applicable standard. EN and DIN pressure ratings such as PN16, PN25, بي إن 40, PN64 and PN100 can also be produced. Final pressure class selection should match the piping design code, service temperature and wall thickness.
س: يستطيع SASA FLANGE توريد أحجام مخصصة?
أ: نعم. SASA FLANGE can manufacture custom threaded flanges according to customer drawings and project requirements, including non-standard dimensions, special drilling patterns, RTJ or RF sealing faces, special thread forms, and customized nickel alloy grades. Additional machining, وضع العلامات, packing and inspection requirements can also be arranged for EPC and maintenance projects.
س: ما هي الشهادة المقدمة?
أ: SASA FLANGE يوفر EN 10204 3.1 material certificate with heat number traceability for supplied Inconel threaded flanges. Supporting documents can include raw material MTC, تقرير فحص الأبعاد, تقرير اختبار مؤشر مديري المشتريات (PMI)., mechanical test results and other project-required records. Hydrostatic testing documentation can be arranged when specified in the purchase order or technical requirement.
اتصل بنا
If you are looking for inconel flanges or related custom flange products, يرجى الاتصال SASA FLANGE مع الحجم المطلوب الخاص بك, فئة الضغط, الصف المادي, معيار, المعالجة السطحية, متطلبات الكمية والتفتيش. سيقدم فريقنا حلولًا تقنية احترافية وعروض أسعار تنافسية في الداخل 24 ساعات.
- 📧 البريد الإلكتروني: sales@sasaflange.com
- 📱 واتساب: +86 13764965049
- ☎️ هاتف: +86 21 52236361
- 🌐 موقع الكتروني: www.sasaflange.com













