• blog
  • Berita
  • Kelas ASTM A182 F22 600 Flensa Leher Las Siap Dikirim
Foto pembuatan flensa leher las palsu
3 Agustus 2026

Kelas ASTM A182 F22 600 Flensa Leher Las Siap Dikirim

Berita ProyekDiterbitkan: 3 Agustus 2026SASA FLANGE Tim Proyek
Proyek selesai

SASA FLANGE completed a batch of ASTM A182 Kelas F22 600 weld neck flanges for elevated-temperature process piping. Final release covered material identity, keterlacakan nomor panas, kekerasan, ukuran, facing condition and export protection before shipment.

Cuplikan proyek

Status proyek Completed and released for shipment
Bahan ASTM A182 Baja paduan tempa F22
Tipe flensa leher las, wajah terangkat (WNRF)
Standar ASME B16.5
Kelas tekanan Kelas 600
Kisaran ukuran NPS 2–12; bores matched to ordered pipe schedules
Inspeksi PMI, kekerasan, ukuran, visual condition and marking
Aplikasi High-temperature refinery and petrochemical process piping

Sorotan pengiriman

Bore transitions were checked against the purchase schedule to support field fit-up.
Raised faces and weld preparations were protected immediately after acceptance.
Released items remained linked to heat numbers and EN 10204 3.1 dokumentasi.

Manufacturing and machining scope

The F22 forgings were processed under the ordered material and heat-treatment requirements before final machining. Hub profiles, bolt drilling, gasket faces and weld ends were produced to the applicable ASME B16.5 dimensional envelope. The ordered pipe schedule was treated as a controlled input because a correct Class 600 flange can still create a field mismatch if the bore or weld preparation is wrong.

During production, heat identity followed the parts through machining and inspection. Permanent marking was applied in a location that remained legible after coating and packing without affecting the sealing surface or weld end.

Release inspection before shipment

PMI confirmed the chrome-moly alloy family, while hardness readings and material records addressed the delivered condition. Dimensional checks covered outside diameter, ketebalan, geometri hub, bolt-hole pattern, membosankan, weld end and raised-face condition. These checks perform different functions and were reviewed together rather than using PMI as a substitute for mechanical or dimensional acceptance.

Following release, sealing faces received rigid protection and the flanges were separated inside the export package to prevent metal-to-metal impact.

Informasi yang dibutuhkan untuk RFQ yang sebanding

Penyelidikan serupa harus mengidentifikasi spesifikasi dan kualitas material yang tepat, mengatur standar dan edisi, NPC, kelas tekanan, tipe flensa, menghadap, jadwal bore atau pencocokan pipa, kuantitas dan tujuan. Untuk cakupan proyek-berita ini, poin referensi utamanya adalah ASTM A182 Baja paduan tempa F22, leher las, wajah terangkat (WNRF), Kelas 600 Dan NPS 2–12; bores matched to ordered pipe schedules.

Nyatakan yang diperlukan EN 10204 jenis sertifikat, keterlacakan nomor panas, luasnya PMI, batas kekerasan, laporan dimensi, Metode NDE dan standar penerimaan, poin saksi pihak ketiga, metode pengepakan dan tanggal pengiriman yang diperlukan pada tahap kutipan. Definisi awal memungkinkan manufaktur, inspeksi dan jadwal dokumen untuk ditinjau bersama.

Produksi, foto inspeksi dan pengepakan

Gambar menunjukkan relevansinya SASA FLANGE produksi, tahapan kendali mutu dan pengiriman yang digunakan untuk laporan berita proyek ini.

Finished alloy steel flanges after machining
Finished flange surfaces prepared for final release.
Dimensional inspection of finished forged components
Quality personnel verifying finished dimensions.
Export packaging for finished industrial components
Protected components prepared for export transport.
Where Are ASTM A182 F22 Flanges Commonly Used? Mengapa Perlakuan Panas Penting ASTM A182 Flensa Baja Paduan Persyaratan Pengujian Kekerasan untuk F11, Flensa F22 dan F91

Pertanyaan yang sering diajukan

Apakah Kelas 600 mean the flange is rated for 600 psi in every condition?

TIDAK. Allowable pressure depends on the material group and design temperature in the adopted ASME B16.5 rating table.

Why is the pipe schedule needed for a weld neck flange?

The schedule or exact wall thickness defines the required bore and weld-end transition for field welding.

Which documents accompanied the shipment?

The release package was prepared around EN 10204 3.1 catatan materi, heat traceability and the ordered inspection reports.

Minta penawaran untuk flensa baja paduan

Kirim nilai ASTM, standar dan edisi, NPC, kelas tekanan, tipe flensa, menghadap, jadwal lubang atau pipa, kuantitas, tujuan pengiriman dan PMI yang dibutuhkan, mati suri, kekerasan, inspeksi dan dokumentasi pihak ketiga.

Kirim RFQ AndaLihat Produk Flange

Posting Terkait

RumahProduk
Mencari