Description
ASTM A182 F22 Class 3 Weld Neck Flange
High-integrity weld neck flanges for refinery, hydrogen-related project reviews, power and thermal-process piping designed around ASTM A182 F22 Class 3.
Quick engineering answer
An ASTM A182 F22 Class 3 weld neck flange is a forged 2.25Cr-1Mo alloy-steel flange for elevated-temperature pressure piping. The long tapered hub and full-penetration butt weld support demanding pressure, thermal and cyclic duties.
Product specifications
| Material | ASTM A182 F22 Class 3 chromium-molybdenum alloy steel |
|---|---|
| Available forms | Raised Face (WNRF), Ring Type Joint (WNRTJ), Flat Face where permitted, Drawing-specific weld neck designs |
| Dimensional standards | ASME B16.5; ASME B16.47 for applicable large diameters; EN 1092-1 or drawing-defined designs on request |
| Nominal size | NPS 1/2 through NPS 24 under ASME B16.5; applicable larger sizes under ASME B16.47 or approved drawings |
| Pressure classes | Class 150, 300, 400, 600, 900, 1500 and 2500 within the selected standard, material group and size limits |
| Facing options | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) where permitted, or drawing-specific facing |
| Bore and weld end | Machined for the ordered pipe outside diameter, wall schedule and approved weld preparation |
| Documentation | EN 10204 3.1 MTC, heat-number traceability, dimensional report and ordered inspection records |
Pressure-temperature ratings and permitted combinations depend on the governing design code, material group, flange standard edition, size and class. Confirm the complete project specification before ordering.
Material selection
F22 Class 3 is widely specified in high-temperature process systems, but it must not be selected by temperature alone. Design allowables, hydrogen-service controls, hardness, heat treatment, weld procedure, PWHT and adjoining P22/WP22 components require coordinated engineering review.
Matching material note: Commonly coordinated with ASTM A335 P22 pipe and ASTM A234 WP22 fittings when the approved piping class uses the 2.25Cr-1Mo material family.
Quality controls available
- Class 3 heat-treatment verification
- Hardness testing and PMI
- UT or MT to the ordered scope
- EN 10204 3.1 MTC and full traceability
Typical applications
Applications are selection cues, not blanket approvals. Process media, pressure, temperature, corrosion data, fatigue, code requirements and the complete piping specification govern final suitability.
Standards and procurement hierarchy
Information required for a quotation
Provide material grade and class, flange type, standard and edition, NPS/DN, pressure class or PN rating, pipe schedule or exact bore, facing and finish, quantity, delivery destination, heat treatment, NDE, testing, certification and third-party inspection requirements.
Frequently asked questions
What is ASTM A182 F22 Class 3 Weld Neck Flange?
An ASTM A182 F22 Class 3 weld neck flange is a forged 2.25Cr-1Mo alloy-steel flange for elevated-temperature pressure piping. The long tapered hub and full-penetration butt weld support demanding pressure, thermal and cyclic duties.
How should this flange material be specified?
State the complete material designation, flange type, dimensional standard and edition, NPS or DN, pressure class, facing, bore or pipe schedule, quantity, heat treatment, testing, certification and inspection requirements. A grade name by itself is not a complete purchase description.
Which flange types can be supplied?
Supply can include weld neck, blind, slip-on, socket-weld, threaded, lap-joint, long weld neck, orifice and drawing-specific flanges where the material, size, pressure class and governing standard permit the selected form.
Which ASME standards apply?
ASME B16.5 covers common NPS 1/2 through NPS 24 pipe flanges within its type, size and class limits. ASME B16.47 covers applicable NPS 26 through NPS 60 large-diameter steel flanges. The material specification, dimensional standard and design code perform different roles and must all be stated.
What documents are available with the order?
Typical documentation includes an EN 10204 3.1 material certificate, heat-number traceability and a dimensional report. PMI, hardness, ferrite, corrosion testing, UT, MT, PT or third-party inspection can be included when applicable and specified before manufacture.
Request a specification review and quotation
Send the complete RFQ or piping material specification. SASA FLANGE will review the grade, flange form, dimensions, bore, facing, inspection and documentation before production.
Related engineering resources
F22 Weld Neck Flanges for Refinery Piping Alloy Steel Material Center









