Description
ASTM A182 F60 Duplex 2205 Flanges – UNS S32205
Forged Duplex 2205 flange solutions combining high mechanical strength with useful resistance to chloride stress-corrosion and localized corrosion in suitable process environments.
Quick engineering answer
ASTM A182 F60 identifies forged UNS S32205 Duplex 2205 flanges, fittings and pressure parts. F60/S32205 has tighter alloy limits than the original F51/S31803 route and should be ordered by its exact ASTM and UNS designations.
Product specifications
| Material | ASTM A182 F60 Duplex 2205 stainless steel |
|---|---|
| Available forms | Weld neck and long weld neck, Blind and spectacle blind, Slip-on, threaded and socket weld, Lap joint, orifice and custom flanges |
| Dimensional standards | ASME B16.5; ASME B16.47 for applicable large diameters; EN 1092-1 or drawing-defined designs on request |
| Nominal size | NPS 1/2 through NPS 24 under ASME B16.5; applicable larger sizes under ASME B16.47 or approved drawings |
| Pressure classes | Class 150, 300, 400, 600, 900, 1500 and 2500 within the selected standard, material group and size limits |
| Facing options | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) where permitted, or drawing-specific facing |
| Bore and weld end | Machined for the ordered pipe outside diameter, wall schedule and approved weld preparation |
| Documentation | EN 10204 3.1 MTC, heat-number traceability, dimensional report and ordered inspection records |
Pressure-temperature ratings and permitted combinations depend on the governing design code, material group, flange standard edition, size and class. Confirm the complete project specification before ordering.
Material selection
Duplex performance depends on chemistry, solution heat treatment, phase balance and fabrication control. Service temperature, chloride content, pH, crevices, oxygen, velocity and welding history must be evaluated; 2205 is not automatically suitable for every seawater or sour-service condition.
Matching material note: Coordinate F60 forged flanges with the exact S32205 pipe and fitting specifications in the approved piping class. Do not assume that F51/S31803 and F60/S32205 can be substituted without documentation and engineering approval.
Quality controls available
- Solution heat-treatment traceability
- PMI and ferrite verification when ordered
- ASTM A923 or corrosion testing by project
- Dimensional, surface and NDE inspection
Typical applications
Applications are selection cues, not blanket approvals. Process media, pressure, temperature, corrosion data, fatigue, code requirements and the complete piping specification govern final suitability.
Standards and procurement hierarchy
Information required for a quotation
Provide material grade and class, flange type, standard and edition, NPS/DN, pressure class or PN rating, pipe schedule or exact bore, facing and finish, quantity, delivery destination, heat treatment, NDE, testing, certification and third-party inspection requirements.
Frequently asked questions
What is ASTM A182 F60 Duplex 2205 Flanges – UNS S32205?
ASTM A182 F60 identifies forged UNS S32205 Duplex 2205 flanges, fittings and pressure parts. F60/S32205 has tighter alloy limits than the original F51/S31803 route and should be ordered by its exact ASTM and UNS designations.
How should this flange material be specified?
State the complete material designation, flange type, dimensional standard and edition, NPS or DN, pressure class, facing, bore or pipe schedule, quantity, heat treatment, testing, certification and inspection requirements. A grade name by itself is not a complete purchase description.
Which flange types can be supplied?
Supply can include weld neck, blind, slip-on, socket-weld, threaded, lap-joint, long weld neck, orifice and drawing-specific flanges where the material, size, pressure class and governing standard permit the selected form.
Which ASME standards apply?
ASME B16.5 covers common NPS 1/2 through NPS 24 pipe flanges within its type, size and class limits. ASME B16.47 covers applicable NPS 26 through NPS 60 large-diameter steel flanges. The material specification, dimensional standard and design code perform different roles and must all be stated.
What documents are available with the order?
Typical documentation includes an EN 10204 3.1 material certificate, heat-number traceability and a dimensional report. PMI, hardness, ferrite, corrosion testing, UT, MT, PT or third-party inspection can be included when applicable and specified before manufacture.
Request a specification review and quotation
Send the complete RFQ or piping material specification. SASA FLANGE will review the grade, flange form, dimensions, bore, facing, inspection and documentation before production.
Related engineering resources
Duplex Stainless Steel Material Center F51 Duplex 2205 Weld Neck Flange









