Description
ASTM A182 F92 High Temperature Flanges
Specialized Grade 92 forged flanges for advanced high-temperature pressure systems designed around the F92/P92 material family and a fully qualified fabrication route.
Quick engineering answer
ASTM A182 F92 high-temperature flanges are forged creep-strength-enhanced ferritic components used in pressure systems specifically designed for Grade 92 materials. They require controlled heat treatment and disciplined welding and PWHT procedures.
Product specifications
| Material | ASTM A182 F92 creep-strength-enhanced ferritic alloy steel |
|---|---|
| Available forms | Weld neck and long weld neck, Blind and spectacle blind, Slip-on, threaded and socket weld, Lap joint, orifice and custom flanges |
| Dimensional standards | ASME B16.5; ASME B16.47 for applicable large diameters; EN 1092-1 or drawing-defined designs on request |
| Nominal size | NPS 1/2 through NPS 24 under ASME B16.5; applicable larger sizes under ASME B16.47 or approved drawings |
| Pressure classes | Class 150, 300, 400, 600, 900, 1500 and 2500 within the selected standard, material group and size limits |
| Facing options | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) where permitted, or drawing-specific facing |
| Bore and weld end | Machined for the ordered pipe outside diameter, wall schedule and approved weld preparation |
| Documentation | EN 10204 3.1 MTC, heat-number traceability, dimensional report and ordered inspection records |
Pressure-temperature ratings and permitted combinations depend on the governing design code, material group, flange standard edition, size and class. Confirm the complete project specification before ordering.
Material selection
F92 should never be treated as a generic upgrade from F91. The project design must confirm code acceptance, allowable stresses, creep life, matching pipe and weld metal, fabrication procedure, hardness range and service history requirements.
Matching material note: Typically coordinated with ASTM A335 P92 pipe and ASTM A234 WP92 fittings when the approved high-temperature piping specification explicitly calls for Grade 92.
Quality controls available
- Complete heat-treatment charts and traceability
- Project-defined hardness mapping
- PMI and strict material segregation
- UT/MT, dimensions and third-party inspection
Typical applications
Applications are selection cues, not blanket approvals. Process media, pressure, temperature, corrosion data, fatigue, code requirements and the complete piping specification govern final suitability.
Standards and procurement hierarchy
Information required for a quotation
Provide material grade and class, flange type, standard and edition, NPS/DN, pressure class or PN rating, pipe schedule or exact bore, facing and finish, quantity, delivery destination, heat treatment, NDE, testing, certification and third-party inspection requirements.
Frequently asked questions
What is ASTM A182 F92 High Temperature Flanges?
ASTM A182 F92 high-temperature flanges are forged creep-strength-enhanced ferritic components used in pressure systems specifically designed for Grade 92 materials. They require controlled heat treatment and disciplined welding and PWHT procedures.
How should this flange material be specified?
State the complete material designation, flange type, dimensional standard and edition, NPS or DN, pressure class, facing, bore or pipe schedule, quantity, heat treatment, testing, certification and inspection requirements. A grade name by itself is not a complete purchase description.
Which flange types can be supplied?
Supply can include weld neck, blind, slip-on, socket-weld, threaded, lap-joint, long weld neck, orifice and drawing-specific flanges where the material, size, pressure class and governing standard permit the selected form.
Which ASME standards apply?
ASME B16.5 covers common NPS 1/2 through NPS 24 pipe flanges within its type, size and class limits. ASME B16.47 covers applicable NPS 26 through NPS 60 large-diameter steel flanges. The material specification, dimensional standard and design code perform different roles and must all be stated.
What documents are available with the order?
Typical documentation includes an EN 10204 3.1 material certificate, heat-number traceability and a dimensional report. PMI, hardness, ferrite, corrosion testing, UT, MT, PT or third-party inspection can be included when applicable and specified before manufacture.
Request a specification review and quotation
Send the complete RFQ or piping material specification. SASA FLANGE will review the grade, flange form, dimensions, bore, facing, inspection and documentation before production.
Related engineering resources









