• บล็อก
  • ข่าว
  • หน้าแปลนตาบอด ASME B16.5 F11 แบบกำหนดเองเสร็จสมบูรณ์สำหรับการสมัครโรงกลั่น
Machined forged blind flange production photo
3 สิงหาคม 2026

หน้าแปลนตาบอด ASME B16.5 F11 แบบกำหนดเองเสร็จสมบูรณ์สำหรับการสมัครโรงกลั่น

ข่าวโครงการPublished: 3 สิงหาคม 2026SASA FLANGE Project Team
Project completed

A refinery project order for ASTM A182 F11 blind flanges has been completed. The standard ASME B16.5 envelope was combined with project-specific machining, หันหน้าไปทาง, marking and documentation requirements without representing modified features as standard catalogue details.

Project snapshot

Project status Completed
วัสดุ ASTM A182 F11 forged alloy steel
ประเภทหน้าแปลน หน้าแปลนตาบอด, raised face
มาตรฐาน ASME B16.5 dimensional basis
Pressure class ระดับ 300 และชั้นเรียน 600
ช่วงขนาด NPS 2–16
การตรวจสอบ พีเอ็มไอ, ความแข็ง, ขนาด, facing and marking
Application Refinery isolation points and equipment connections

Delivery highlights

Project-specific details were controlled by the approved drawing revision.
Raised faces were inspected before protective covers were installed.
Material certificates and physical markings remained linked by heat number.

Standard dimensions with controlled project features

ASME B16.5 defined the applicable size, ระดับ, drilling and principal flange dimensions. The purchase order added controlled surface finish, marking and selected machining details required by the refinery specification. These additions were checked against the approved drawing so that a project modification did not become an undocumented deviation.

Because blind flanges close a piping end or equipment nozzle, ความหนา, bolt-hole alignment and gasket-facing condition were central to the dimensional inspection plan.

Inspection and refinery release documentation

PMI supported F11 material identity, while hardness and material records supported the ordered condition. Final inspection verified thickness, outside diameter, bolt circle, hole size, face finish, marking and visual condition. Any preservation coating was kept away from the gasket contact area.

The completed release package connected the flange marking to the material certificate, inspection results and packing list for site receipt.

Information needed for a comparable RFQ

A comparable inquiry should identify the exact material specification and grade, governing standard and edition, กรมอุทยานฯ, ระดับความดัน, ประเภทหน้าแปลน, หันหน้าไปทาง, กำหนดการเจาะหรือจับคู่ท่อ, quantity and destination. For this project-news scope, the key reference points were ASTM A182 F11 forged alloy steel, หน้าแปลนตาบอด, raised face, ระดับ 300 และชั้นเรียน 600 และ NPS 2–16.

State the required EN 10204 certificate type, การติดตามหมายเลขความร้อน, PMI extent, ขีดจำกัดความแข็ง, dimensional report, NDE method and acceptance standard, third-party witness points, packing method and required delivery date at quotation stage. Early definition allows manufacturing, inspection and document schedules to be reviewed together.

การผลิต, inspection and packing photos

Images show the relevant SASA FLANGE production, quality-control and shipment stages used for this project-news report.

Finished blind flange after face machining
Blind flange geometry prepared for final inspection.
Inspector checking finished component dimensions
Dimensional verification before project release.
Industrial flanges protected for shipment
Packed flanges with transport protection.
ASTM A182 F11 vs F22 vs F91 Flanges ASME B16.5 Alloy Steel Flange Dimensions and Pressure Classes How to Read ASTM A182 Flange Markings

คำถามที่พบบ่อย

Can a modified flange still be called ASME B16.5 compliant?

Only if every applicable requirement remains satisfied. Project-specific deviations should be identified against the drawing and reviewed by the responsible engineer.

Why use F11 for refinery blind flanges?

F11 may be selected within approved chrome-moly material classes for elevated-temperature process service. Suitability depends on the complete design basis.

Which dimensions matter most on a blind flange?

Thickness, outside diameter, bolt circle, hole size, facing geometry and surface finish are typical controlled features.

Request a quotation for alloy steel flanges

Send the ASTM grade, มาตรฐานและฉบับ, กรมอุทยานฯ, ระดับความดัน, ประเภทหน้าแปลน, หันหน้าไปทาง, ตารางการเจาะหรือท่อ, ปริมาณ, delivery destination and required PMI, ใกล้ใกล้ตาย, ความแข็ง, third-party inspection and documentation.

Send Your RFQView Flange Products

โพสต์ที่เกี่ยวข้อง

บ้านสินค้า
ค้นหา