Sour gas — a natural gas mixture containing significant amounts of hydrogen sulfide (ฮ₂ส) — presents one of the most challenging environments for any piping system. Its corrosive, พิษ, and embrittling effects demand specialized materials and equipment. When selecting components like flanges, you can’t afford to guess. You must ask the right question: What flange is suitable for sour gas environments?

This guide will walk you through everything you need to know about choosing flanges for sour service. We’ll explore material selection, NACE compliance, common flange types, and best practices for ensuring safe, long-term performance under H₂S exposure. As a trusted supplier in oil, แก๊ส, and petrochemical sectors, SASA FLANGE provides certified sour service flanges engineered for the most demanding operations.

---

Understanding Sour Gas and Its Dangers

Sour gas refers to natural gas that contains hydrogen sulfide (ฮ₂ส), typically in concentrations above 4 ppm. H₂S is not only highly toxic but also extremely มีฤทธิ์กัดกร่อน, especially when combined with moisture or CO₂. In industrial systems, it poses several threats:

• Sulphide Stress Cracking (SSC)

• Hydrogen-Induced Cracking (HIC)

• Pitting and general corrosion

• Reduced mechanical strength of metals

Due to these factors, standard materials and flange designs cannot be safely used in sour gas applications without proper qualification.

---

International Standards for Sour Service

The most critical standards governing sour gas equipment selection are:

• NACE MR0175 / ISO 15156
  Specifies material requirements for equipment in H₂S-containing environments in oil and gas production.

• ASME B16.5 / บ16.47
  Governs flange dimensions and pressure classes.

• เอพีไอ 6A
  Used for high-pressure wellhead and Christmas tree equipment, including sour service.

Flanges for sour gas environments must comply with NACE MR0175 / ISO 15156 to avoid catastrophic material failure.

---

Key Requirements for Sour Gas Flange Materials

To be safe for sour service, a flange material must:

✅ Resist Sulfide Stress Cracking (SSC)

High-strength steels are more vulnerable to SSC. ดังนั้น, materials should have limited hardness, typically ≤22 HRC for carbon steels.

✅ Have Low Yield Strength

Lower strength materials are less likely to crack under H₂S-induced stress.

✅ Be Resistant to Hydrogen Embrittlement

Materials must withstand hydrogen diffusion without cracking.

✅ Offer Good Corrosion Resistance

Especially when exposed to wet H₂S or CO₂-containing environments.

---

Recommended Materials for Sour Gas Flanges

1. ASTM A105 (NACE-Compliant)

• เหล็กกล้าคาร์บอน

• Must be normalized and have hardness ≤ 22 เหล็กแผ่นรีดร้อน

• Common for Class 150–600 flanges

2. ASTM A350 แอลเอฟ2 (Low-Temp Carbon Steel)

• Suitable for sour gas + low temperature environments

• Requires NACE-compliant heat treatment and testing

3. ASTM A694 F52 / F60 / F65

• High-strength carbon steels

• Used in high-pressure sour gas pipelines

• NACE MR0175 modifications mandatory

4. ASTM A182 F316L / F304L (Austenitic Stainless Steel)

• Excellent resistance to wet H₂S corrosion

• Naturally meets NACE requirements due to low hardness

• Preferred for offshore sour gas operations

5. ดูเพล็กซ์สแตนเลส (เช่น, UNS S31803 / S32750)

• High strength and excellent H₂S resistance

• Requires certification for NACE environments

• Used in subsea and high-pressure H₂S fields

SASA FLANGE supplies all of the above materials, certified to meet NACE MR0175, with full traceability and test documentation.

---

Best Flange Types for Sour Gas Applications

🔧 Weld Neck Flange

• Best suited for high-pressure and high-stress sour environments

• Butt-welded design offers strong, reliable joint

• Prevents stress risers near H₂S-prone areas

🔧 Blind Flange

• Used to seal off H₂S-containing process lines

• Must be carefully selected for material compatibility

🔧 Socket Weld Flange

• Acceptable for smaller bore pipes but must be properly stress-relieved

• Potential for crevice corrosion if not sealed correctly

🔧 RTJ (ข้อต่อแบบแหวน) หน้าแปลน

• Ideal for sour service in high-pressure, high-temperature environments

• Metallic ring gasket provides tight seal, less prone to gas leaks

---

Design Considerations for Sour Gas Flanges

To ensure long-term performance and safety, flanges in sour gas service should follow these engineering guidelines:

🔩 Gasket Selection

Use NACE-approved gaskets such as spiral wound with PTFE or graphite fillers. Avoid elastomers that degrade in H₂S.

🔩 Bolting Materials

Bolts and studs must also comply with NACE MR0175. Common choices include B7M or L7M bolts with reduced hardness.

🔩 Coatings and Cladding

For added protection, internal surfaces may be clad with corrosion-resistant alloys such as Inconel 625 or overlaid with stainless steel.

🔩 Testing and Documentation

Request material test reports (รถไฟฟ้าใต้ดิน) and hardness certificates. Hydrostatic and HIC/SSC testing may be required for critical projects.

---

Common Applications of Sour Gas Flanges

Sour service flanges are essential in:

• Oil and gas fields with high H₂S concentrations

• Offshore production platforms

• Gas processing and separation units

• Refineries handling sour crude

• High-pressure gas compression systems

Every component exposed to sour gas must be engineered for resistance and reliability — especially the flanges.

---

ทำไมต้องเลือก SASA FLANGE for Sour Service?

SASA FLANGE is a trusted manufacturer and global exporter of flanges certified for sour gas environments. We provide:

• Flanges compliant with NACE MR0175 / ISO 15156

• Pressure ratings up to ระดับ 2500

• วัสดุ: A105N, แอลเอฟ2, F52–F70, 316ล, ดูเพล็กซ์, และอีกมากมาย

• เต็ม EN 10204 3.1 / 3.2 test certificates and third-party inspection support

• Precision machining and surface finish to minimize stress points

With our extensive experience in supplying flanges for sour gas fields in the Middle East, Africa, and South America, SASA FLANGE helps clients meet the strictest safety and performance requirements in H₂S-rich operations.

---

บทสรุป

In sour gas environments, flange failure is not an option. H₂S is aggressive, unpredictable, and unforgiving — so your flange selection must be based on strict engineering and safety criteria. ที่ right flange for sour service is one made from NACE-compliant material, with a design that minimizes stress และก seal that prevents leaks under pressure.

เลือก เหล็กกล้าคาร์บอน, สแตนเลส, หรือ duplex alloys carefully treated to resist sulfide stress cracking and hydrogen embrittlement. Always verify standards compliance and certifications.

And most importantly, trust a partner who understands the risks. เชื่อมั่น SASA FLANGE — engineered for the extreme, certified for sour service.