For buyers, the practical question is not simply “S32750 or S32760?” It is whether the complete flange specification identifies the correct UNS grade, ASTM grade, boyutlar, basınç sınıfı, karşı karşıya, service conditions and quality requirements. This guide turns the material comparison into a procurement decision.

S32750 vs S32760 at a Glance

The Main Chemistry Difference: Copper and Tungsten

Both grades achieve a high chromium, molybdenum and nitrogen balance associated with super duplex stainless steel. The clearest compositional distinction is that S32760 includes controlled copper and tungsten additions. Published producer data for S32760 commonly show both elements in the approximate 0.5–1.0% range. S32750 data do not identify tungsten as a deliberate alloying addition, while copper is limited rather than used as the defining difference.

Those differences can influence corrosion behaviour in specific environments, but composition alone does not prove that one flange will outperform the other in the buyer’s process. Pitting resistance equivalent numbers are useful screening indicators; they do not capture every effect of temperature, yarıklar, mevduat, yüzey durumu, welding, phase balance or process contaminants.

What ASTM A182 F53 and F55 Mean for Flanges

ASTM A182/A182M covers forged or rolled alloy and stainless steel pipe flanges, dövme bağlantı parçaları, valves and parts for designated service. In this product-form route, F53 identifies UNS S32750 and F55 identifies UNS S32760. The material grade is only one part of the flange description.

A complete order also needs the dimensional standard—such as ASME B16.5 veya ASME B16.47 where applicable—plus nominal pipe size, basınç sınıfı, flanş tipi, karşı karşıya, bore or matching pipe schedule, tolerances and project-specific examination. A material designation does not by itself establish flange dimensions or a pressure-temperature rating.

Review the S32750 and S32760 super duplex flange range for the product route, then confirm the exact F53 or F55 grade on the RFQ.

How to Choose F53 or F55 for a Flange Project

If the piping package already specifies F53, choosing F55 only because it appears “more alloyed” can create an unapproved deviation. If the package specifies F55, offering F53 without a formal technical review has the same problem. The correct commercial response is to identify the deviation clearly and obtain approval before supply.

Pressure Class Is Separate from Material Grade

F53 and F55 describe material grades under ASTM A182; they are not pressure classes. A Class 150, 300, 600, 900, 1500 veya 2500 designation belongs to the applicable flange dimensional and pressure-temperature system. The allowable rating depends on the exact material group, temperature and governing standard edition.

Therefore, “F55 flange” is incomplete. A usable requirement might identify an ASTM A182 F55 weld-neck flange, the dimensional standard, boyut, sınıf, facing and bore. For an instrument connection, the purchaser may need a specialised product such as an ASTM A182 F55 S32760 weld-neck orifice flange, with tapping and orientation requirements defined separately.

RFQ Checklist for S32750 or S32760 Flanges

1. Seviye: UNS S32750 / ASTM A182 F53 or UNS S32760 / ASTM A182 F55.
2. Flange type: weld neck, bağcıksız, kör, socket weld, dişli, lap-joint arrangement, orifice or another defined type.
3. Boyutlar: ASME B16.5, ASME B16.47, EN 1092-1 or the applicable project standard and edition.
4. Size and rating: NPS/DN, Class/PN, bore or pipe schedule, and facing.
5. Miktar: item count and any matching companion-flange requirement.
6. Service data: design and operating temperature/pressure plus the actual process chemistry.
7. Inspection and testing: only the required PMI, ÖYD, ferrite, corrosion, impact or hardness provisions.
8. Dokümantasyon: required MTC type, izlenebilirlik, inspection plan and approved deviations.
9. Commercial details: destination, requested schedule, packing and any approved manufacturer list.

For broader grade context, use the Duplex Stainless Steel Material Center. Kullanılabilirlik, sertifikasyon, testing and delivery must be confirmed against the exact item list; they should not be inferred from a general material article.

Sıkça Sorulan Sorular

Are S32750 and S32760 the same material?

HAYIR. They are separate UNS grades in the super duplex family. Their general alloy levels are similar, but S32760 includes deliberate copper and tungsten additions and has a different specification identity.

öyle mi ASTM A182 F53 equivalent to S32750?

For forged products within ASTM A182, F53 is the grade designation associated with UNS S32750. Always state both the material specification and the grade because the UNS number alone does not define every product requirement.

öyle mi ASTM A182 F55 equivalent to S32760?

For the ASTM A182 forged-product route, F55 is associated with UNS S32760. Confirm the adopted specification edition and project supplements on the purchase order.

Is S32760 better than S32750?

Not universally. S32760 has copper and tungsten additions, but suitability depends on the actual service, product condition, fabrication and qualification requirements. A higher or different alloy content is not automatic approval for substitution.

Can F53 and F55 flanges be interchanged?

Only after formal technical and purchasing approval. The change can affect the material specification, welding, corrosion review, qualification documents and project compliance.

Yapmak 2507 always mean S32750?

“2507” is commonly used for S32750, but it is not enough for a controlled purchase order. Durum UNS S32750 and the applicable product specification and grade, such as ASTM A182 F53 for a forged flange.