Alloy 20 Lap Joint Flanges for Corrosive Service

Category:

Alloy 20 lap joint flanges are corrosion-resistant loose flanges designed to work with stub ends in aggressive chemical and process piping systems. Available in ASTM B462 UNS N08020 and equivalent Alloy 20 grades, they are widely used in sulfuric acid, fertilizer, pharmaceutical and marine applications. SASA FLANGE supplies alloy 20 lap joint flanges with EN 10204 3.1 certificate, PMI testing, dimensional inspection and full heat number traceability for reliable global project procurement.

  • ✓Grade: ASTM B462 UNS N08020, Alloy 20 CB3, Carpenter 20 equivalent, Werkstoff 2.4660
  • ✓Surface: Pickled, passivated, machined finish, protective oil on machined areas, marked and packed for export
  • ✓Specification: DN15 to DN600 (1/2 inch to 24 inch), Class 150 to 600, PN10 to PN40

Description

Product Detail

Alloy 20 lap joint flanges are loose backing flanges used together with alloy 20 stub ends to create a practical flange connection for piping systems that require frequent dismantling, alignment flexibility and strong resistance to acidic media. Compared with welding neck or slip on designs, the lap joint type reduces flange contact with process fluid while maintaining convenient assembly. It is commonly specified for chemical processing, sulfuric acid handling, pickling lines, pharmaceutical plants and marine systems.

SASA FLANGE supplies alloy 20 lap joint flanges in standard and customized sizes according to ASME, EN, DIN, JIS and GB requirements. Each order can be supported with chemical analysis, mechanical testing, dimensional inspection, PMI testing, EN 10204 3.1 certificate and full heat number traceability to meet project, EPC and end-user documentation requirements.

  • ✓Product Name: Alloy 20 Lap Joint Flange
  • ✓Material Grade: ASTM B462 UNS N08020 / Alloy 20
  • ✓Product Type: Lap Joint Flange for use with stub end
  • ✓Main Feature: Excellent resistance to sulfuric acid, chlorides and general chemical corrosion with easy bolt alignment
  • ✓Applications: Chemical processing, fertilizer, pharmaceutical, offshore, pickling and acid transfer pipelines

Product Parameters

Product Name Alloy 20 Lap Joint Flange
Material Grade ASTM B462 UNS N08020, Alloy 20 CB3, Carpenter 20 equivalent, Werkstoff 2.4660
Material Type Nickel-Iron-Chromium austenitic corrosion-resistant alloy
Product Form Forged or plate machined lap joint flange used with stub end
Size Range DN15 – DN600 (1/2 inch – 24 inch)
Pressure Class Class 150 – 600 / PN10 – PN40
Sealing Face Flat Face, Raised Face, stub-end seating face as per lap joint design
Surface Treatment Pickling, passivation, machined finish, protective oil on machined surfaces
Standard ASME B16.5, EN 1092-1, DIN, JIS B2220, GB/T 9119 or customer specification
Inspection Chemical Analysis, Mechanical Test, PMI Test, Dimensional Inspection, Visual Inspection
Certificate EN 10204 3.1 Material Certificate available
Processing Service Cutting, CNC Machining, Custom Drilling, Custom Size Processing

Chemical Composition

The following chemical composition is for reference for standard Alloy 20 material used in flange production. Exact values may vary slightly by melting route, product form and applicable ASTM specification. Final composition is confirmed by the material test certificate and must comply with the ordered standard and project requirements.

Element C Si Mn P S Cr Ni Mo Other
Content % 0.07 max 1.00 max 2.00 max 0.045 max 0.035 max 19.0 – 21.0 32.0 – 38.0 2.0 – 3.0 Cu 3.0 – 4.0, Nb 8xC min to 1.0 max, Fe balance

Mechanical Properties

Mechanical properties shown below are typical reference values for Alloy 20 flange material in annealed condition. Actual results may vary depending on grade specification, forging process, heat treatment and section thickness. Project acceptance values should always be verified against the applicable ASTM standard and certified inspection documents.

Grade Tensile Strength Yield Strength Elongation Hardness Density
UNS N08020 Annealed 550 MPa min 240 MPa min 30% min 217 HB max 8.08 g/cm3
Alloy 20 Forged Flange 560 – 690 MPa 245 – 345 MPa 30% min 210 HB max 8.08 g/cm3

Common Size Table

Size Range Pressure Class Sealing Face Material Availability
DN15 – DN50 Class 150 – 300 LJ with stub end seating ASTM B462 UNS N08020 Stock / Production
DN65 – DN150 Class 150 – 600 LJ with stub end seating ASTM B462 UNS N08020 Stock / Production
DN200 – DN300 Class 150 – 600 LJ with stub end seating ASTM B462 UNS N08020 Production
DN350 – DN600 Class 150 – 300 LJ with stub end seating ASTM B462 UNS N08020 Made to Order

Different Specifications Comparison

Type Description Typical Use
ASME Lap Joint Flange Loose flange used with ASME stub end, commonly supplied to B16.5 dimensions Chemical plants, skid systems, maintenance-friendly process lines
EN Lap Joint Flange Loose flange produced to EN 1092-1 dimensions for use with matching collar or stub end European process piping, water and chemical installations
Forged Alloy 20 LJ Flange Made from forged Alloy 20 for improved integrity and controlled grain flow Critical corrosive service and higher reliability requirements
Plate Machined Alloy 20 LJ Flange Machined from alloy plate for selected sizes and project-specific dimensions Low to medium pressure service and custom fabrication

Equivalent Standards and International Names

Alloy 20 lap joint flanges can be manufactured to major international flange dimensional standards, while the material grade is specified by the applicable alloy standard. Equivalent names may differ by market, but UNS N08020 and Alloy 20 are the most widely recognized references for corrosion-resistant flange applications.

Standard / Region Standard Code Typical Grade / Equivalent
USA ASME B16.5 ASTM B462 UNS N08020 / Alloy 20
Europe EN 1092-1 Alloy 20 / 2.4660 equivalent by project specification
Germany DIN 2527 / 2566 Werkstoff 2.4660 / Alloy 20 equivalent
Japan JIS B2220 Alloy 20 equivalent on request
China GB/T 9119 UNS N08020 / Alloy 20 according to customer requirement

Production Process Flow

SASA FLANGE controls each manufacturing stage for alloy 20 lap joint flanges to ensure corrosion performance, dimensional accuracy and reliable documentation. Material identity and machining precision are especially important for high-value nickel alloy products.

  • 1. Raw Material Selection
  • 2. Forging / Cutting
  • 3. Heat Treatment
  • 4. Rough Machining
  • 5. Finish Machining
  • 6. Drilling
  • 7. Surface Treatment
  • 8. Inspection
  • 9. Marking
  • 10. Packing
  • 11. Delivery
Process Step Description Quality Control Point
Raw Material Select certified forging billets or plates Material certificate and traceability
Forging Hot forging to achieve required shape Forging temperature and reduction ratio
Heat Treatment Solution annealing or stress relief as required Temperature and holding time control
Machining Seating face, bolt holes and dimensions Dimensional accuracy and surface finish
Inspection Final inspection before shipment Dimension, surface, PMI and marking verification

Product Inspection

1. Chemical Composition Inspection

Chemical analysis is carried out to verify that the alloy 20 material meets the required composition range for chromium, nickel, molybdenum, copper and niobium, along with controlled carbon, sulfur and phosphorus levels. This inspection confirms the corrosion-resistant grade before machining and shipment, and results are referenced in the material certificate.

2. Mechanical Properties Testing

Mechanical testing is performed according to the applicable material standard to confirm tensile strength, yield strength, elongation and hardness values. These tests help ensure the flange material has suitable strength and ductility for fabrication and service. Test results are reviewed against ordered requirements and retained for quality documentation.

3. Dimensional Inspection

Each alloy 20 lap joint flange is checked for outside diameter, bore, thickness, bolt circle, bolt hole quantity and hole diameter according to the specified standard. The seating surface and overall flatness are also inspected to ensure proper fit-up with the stub end and accurate field assembly during installation.

4. PMI Testing and Hydrostatic Testing

PMI testing is available on each flange to verify alloy identity and prevent material mix-up in nickel alloy projects. Lap joint flanges are not pressure-containing by themselves, so hydrostatic testing is generally applied to the assembled piping system rather than the loose flange alone. EN 10204 3.1 certificate, MTC and inspection reports can be supplied.

Product Packaging

  • ✓Wooden Case Packaging: Suitable for high-pressure and large-diameter products
  • ✓Pallet Packing with Shrink Wrap: Suitable for batch shipments and standard sizes
  • ✓Anti-rust Oil Coating + Waterproof Paper: Used for ocean freight protection
  • ✓Individual Plastic Bag + Carton: Used for small fittings and threaded products
  • ✓Clear Marking: Grade, size, pressure class, heat number and PO number

Applications

Alloy 20 lap joint flanges are widely used in piping systems handling corrosive fluids where flange alignment, dismantling convenience and material reliability are important. Their excellent resistance to sulfuric acid and many aggressive chemicals makes them suitable for process industries that demand long service life and dependable traceability.

Industry Typical Applications Why This Product Is Used
Oil and Gas Produced water systems, chemical injection lines, offshore utility piping Provides corrosion resistance and easier flange alignment during maintenance
Chemical Processing Sulfuric acid lines, reactors, storage transfer piping, pickling systems Alloy 20 offers strong resistance to acidic media and chloride-related attack
Power Generation FGD systems, chemical dosing lines, auxiliary corrosive service piping Supports reliable service in aggressive wet chemical environments
Water Treatment Dosing skids, acid regeneration systems, specialty treatment units Suitable where chemicals and repeated dismantling are involved
Marine and Offshore Corrosive service modules, platform process skids, maintenance-access piping Loose flange design simplifies installation and replacement in restricted spaces

Why Choose SASA FLANGE?

  • ✓Professional manufacturer of Lap Joint Flange for global industrial projects
  • ✓Customized size, pressure class and material grade according to drawings
  • ✓Full standard support: ASME, EN, DIN, JIS, GB, GOST and customer specifications
  • ✓Material traceability with heat number control and EN 10204 3.1 material certificate
  • ✓Chemical analysis, mechanical testing, PMI testing, hydrostatic and dimensional inspection
  • ✓Stock availability for standard items, lead time 3-7 days; custom production 15-30 days
  • ✓Export-grade packaging for sea, air and land transportation
  • ✓15+ years experience supplying 50+ countries worldwide

FAQ

Q: What is an alloy 20 lap joint flange?

A: An alloy 20 lap joint flange is a loose backing flange used together with an alloy 20 stub end. The flange does not contact the process medium directly in the same way as an integral flange face, which helps reduce cost in some designs while allowing easy alignment, quick dismantling and good corrosion performance in aggressive chemical piping systems.

Q: What materials are available for alloy 20 lap joint flanges?

A: The main material is ASTM B462 UNS N08020, also known as Alloy 20 or Carpenter 20 equivalent. Depending on project requirements, SASA FLANGE can also offer matching stub ends and related corrosion-resistant flange products in stainless steel, duplex stainless steel, nickel alloys and other special materials with full traceability and certified documentation.

Q: What pressure class is supported?

A: For alloy 20 lap joint flanges, the common supply range is ASME Class 150, 300 and 600, with selected EN and DIN pressure ratings such as PN10, PN16, PN25 and PN40. Higher-pressure designs are reviewed according to size, standard, material availability and the mating stub end configuration required by the piping system.

Q: Can SASA FLANGE supply custom sizes?

A: Yes. SASA FLANGE can supply custom alloy 20 lap joint flanges based on drawings or project specifications, including non-standard drilling, special bore sizes, customized dimensions, special facing requirements and matched stub ends. We support ASME, EN, DIN, JIS and GB dimensions as well as OEM machining for skid fabricators, EPC contractors and end users.

Q: What certificate is provided?

A: SASA FLANGE can provide EN 10204 3.1 material certificate, mill test certificate, heat number traceability, dimensional inspection reports and PMI records for alloy 20 lap joint flanges. Additional documentation can be arranged according to order requirements. For assembled pressure systems, hydrostatic test records are generally issued at piping or system level rather than for the loose flange itself.

Contact Us

If you are looking for alloy 20 flanges or related custom flange products, please contact SASA FLANGE with your required size, pressure class, material grade, standard, surface treatment, quantity and inspection requirements. Our team will provide professional technical solutions and competitive quotation within 24 hours.

  • 📧 Email: sales@sasaflange.com
  • 📱 WhatsApp: +86 13764965049
  • ☎️ Tel: +86 21 52236361
  • 🌐 Website: www.sasaflange.com

Leave Your Message

    Send your size, material, standard and quantity. We will reply within 24 hours.

    Upload Image / Drawing (optional)

    Accepted: JPG, PNG, WebP or PDF. Maximum file size: 5 MB.