Duplex 2205 Lap Joint Flanges for Corrosive Service

Category:

Duplex 2205 lap joint flanges are corrosion-resistant backing flanges used with stub ends to create an economical, easily aligned piping connection in aggressive process systems. Available in ASTM A182 F51 / UNS S32205 and related duplex grades, they are widely used in oil and gas, chemical processing, marine and water treatment lines. SASA FLANGE supplies these flanges with EN 10204 3.1 certificate, PMI testing and full heat number traceability.

  • ✓Grade: ASTM A182 F51 / UNS S32205, F60 / UNS S32209, F53 / UNS S32750, F55 / UNS S32760
  • ✓Surface: Pickled and passivated, machined finish, anti-rust protective oil on machined areas, customer-marked
  • ✓Specification: DN15 to DN1500 (1/2 inch to 60 inch), Class 150 to 1500, PN10 to PN100

Description

Product Detail

Duplex 2205 lap joint flanges are loose backing flanges designed to be used together with lap joint stub ends. This construction allows flange rotation for easier bolt alignment and simplifies maintenance in piping systems that require frequent dismantling. With high strength, excellent resistance to chloride stress corrosion cracking and strong pitting resistance, 2205 duplex lap joint flanges are widely selected for offshore, desalination, chemical, pulp and paper, and process water service.

SASA FLANGE supplies standard and customized duplex 2205 lap joint flanges in accordance with ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS and GB standards. Each order can be supported by chemical analysis, mechanical testing, dimensional inspection, PMI testing, EN 10204 3.1 certificate and full heat number traceability to ensure reliable performance in critical industrial applications.

  • ✓Product Name: Duplex 2205 Lap Joint Flange
  • ✓Material Grade: ASTM A182 F51 / UNS S32205 duplex stainless steel
  • ✓Product Type: Lap Joint Flange used with stub end
  • ✓Main Feature: High strength, excellent chloride corrosion resistance, easy alignment and maintenance
  • ✓Applications: Oil and gas, chemical processing, seawater systems, desalination, power and water treatment

Product Parameters

Product Name Duplex 2205 Lap Joint Flange
Material Grade ASTM A182 F51 / UNS S32205; optional F60, F53, F55
Material Type Duplex stainless steel forged flange
Product Form Lap Joint Flange / Loose Backing Flange for use with stub end
Size Range DN15 – DN1500 (1/2 inch – 60 inch)
Pressure Class Class 150 – 1500 / PN10 – PN100
Sealing Face Flat Face, Raised Face, special facing to suit lap joint stub end design
Surface Treatment Pickling, passivation, machined finish, protective oil on machined surfaces
Standard ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, GB/T 9119 or customer specification
Inspection Chemical Analysis, Mechanical Test, PMI Test, Dimensional Inspection, Visual Inspection
Certificate EN 10204 3.1 Material Certificate available
Processing Service Cutting, CNC Machining, Custom Drilling, Custom Size Processing

Chemical Composition

The following chemical composition is for reference for ASTM A182 F51 / UNS S32205 duplex stainless steel used in duplex 2205 lap joint flanges. Actual chemistry may vary slightly by heat and applicable standard. Final values are confirmed by the mill test certificate and verified through incoming material inspection and PMI testing before production.

Element C Si Mn P S Cr Ni Mo Other
Content % 0.030 max 1.00 max 2.00 max 0.030 max 0.020 max 22.0-23.0 4.5-6.5 3.0-3.5 N 0.14-0.20

Mechanical Properties

Mechanical properties of duplex flange materials depend on grade, solution annealing condition, section thickness and applicable specification. The values below are typical minimum requirements for forged duplex stainless steel flanges and are provided for technical reference. Final certified values are stated on the EN 10204 3.1 material certificate for each production heat.

Grade Tensile Strength Yield Strength Elongation Hardness Density
ASTM A182 F51 / UNS S32205 620 MPa min 450 MPa min 25% min 290HB max 7.80 g/cm3
ASTM A182 F53 / UNS S32750 795 MPa min 550 MPa min 15% min 310HB max 7.80 g/cm3

Common Size Table

Size Range Pressure Class Sealing Face Material Availability
DN15 – DN50 Class 150 – 600 FF / RF ASTM A182 F51 Stock / Production
DN65 – DN300 Class 150 – 900 FF / RF ASTM A182 F51 Stock / Production
DN350 – DN600 Class 150 – 1500 FF / RF ASTM A182 F51 / F53 Production
DN700 – DN1500 Class 150 – 600 FF ASTM A182 F51 Made to Order

Different Specifications Comparison

Type Description Typical Use
ASME Lap Joint Flange Loose flange used with lap joint stub end, dimensioned to ASME B16.5 or B16.47 Process piping, maintenance-intensive systems, skid packages
EN Lap Joint Flange Plate or forged loose flange matched with EN stub end under EN 1092-1 dimensions European process plants, water and chemical installations
Duplex 2205 LJ Flange Lap joint flange manufactured from ASTM A182 F51 duplex stainless steel for improved corrosion resistance Seawater, chloride-bearing media, offshore and desalination systems
Super Duplex LJ Flange Loose flange in F53 or F55 for higher pitting resistance and strength than 2205 High-chloride offshore, subsea and severe chemical environments

Equivalent Standards and International Names

Duplex 2205 lap joint flanges can be produced to major international flange standards according to project requirements. While the flange dimensional standard defines size and drilling, the material grade is generally specified separately as ASTM A182 F51 or equivalent duplex stainless steel. Equivalent names may vary by region, drawing practice and end-user specification.

Standard / Region Standard Code Typical Grade / Equivalent
USA ASME B16.5 ASTM A182 F51 / UNS S32205
Europe EN 1092-1 1.4462 duplex stainless steel
Germany DIN 2527 / 2566 Werkstoff 1.4462
Japan JIS B2220 SUS329J3L equivalent project-specified duplex
China GB/T 9119 022Cr22Ni5Mo3N / S2205 equivalent

Production Process Flow

Manufacturing of duplex 2205 lap joint flanges requires controlled raw materials, proper heat treatment and precision machining to preserve duplex phase balance and corrosion resistance. SASA FLANGE applies strict process control from billet selection to final inspection.

  • 1. Raw Material Selection
  • 2. Forging / Cutting
  • 3. Heat Treatment
  • 4. Rough Machining
  • 5. Finish Machining
  • 6. Drilling
  • 7. Surface Treatment
  • 8. Inspection
  • 9. Marking
  • 10. Packing
  • 11. Delivery
Process Step Description Quality Control Point
Raw Material Select certified forging billets or plates Material certificate and traceability
Forging Hot forging to achieve required shape Forging temperature and reduction ratio
Heat Treatment Solution annealing and rapid cooling for duplex structure Temperature and holding time control
Machining Sealing face, bolt holes, dimensions Dimensional accuracy and surface finish
Inspection Final inspection before shipment Dimension, surface, PMI, marking

Product Inspection

1. Chemical Composition Inspection

Chemical composition inspection is performed to confirm that the duplex stainless steel used for the flange meets ASTM A182 F51 requirements. Key alloying elements such as chromium, nickel, molybdenum and nitrogen are verified against the specified range to ensure corrosion resistance, mechanical strength and compliance with the mill test certificate.

2. Mechanical Properties Testing

Mechanical testing is used to verify tensile strength, yield strength, elongation and hardness of the forged flange material after heat treatment. These tests confirm the material has achieved the required duplex structure and strength level for pressure service. Test results are reviewed against applicable standards and included in the quality documentation package.

3. Dimensional Inspection

Dimensional inspection covers outside diameter, inside diameter, flange thickness, bolt circle, bolt hole size and quantity, and facing details. For lap joint flanges, fit-up with the mating stub end is also checked to ensure free rotation and proper assembly. All dimensions are verified according to ASME, EN, DIN, JIS, GB or customer drawings.

4. PMI Testing and Hydrostatic Testing

PMI testing is conducted using portable analyzers to confirm duplex 2205 material identity and prevent grade mix-up in critical projects. While flanges themselves are normally not hydrostatically tested as individual components, hydrostatic pressure testing can be arranged as part of assembled spool or project requirements. EN 10204 3.1 certificate and traceable inspection records are provided.

Product Packaging

  • ✓Wooden Case Packaging: Suitable for high-pressure and large-diameter products
  • ✓Pallet Packing with Shrink Wrap: Suitable for batch shipments and standard sizes
  • ✓Anti-rust Oil Coating + Waterproof Paper: Used for ocean freight protection
  • ✓Individual Plastic Bag + Carton: Used for small fittings and threaded products
  • ✓Clear Marking: Grade, size, pressure class, heat number and PO number

Applications

Duplex 2205 lap joint flanges are widely used in corrosive and chloride-containing services where easy installation, flange rotation and frequent line disassembly are important. Their combination of high strength and strong corrosion resistance makes them suitable for demanding process piping across multiple industries.

Industry Typical Applications Why This Product Is Used
Oil and Gas Produced water lines, offshore utility piping, firewater and chemical injection systems High strength and good resistance to chloride stress corrosion cracking
Chemical Processing Acidic media transfer lines, process equipment connections, solvent and brine piping Corrosion resistance and easy alignment with stub end assemblies
Power Generation FGD systems, cooling water circuits, service water and condensate auxiliary lines Reliable performance in wet and corrosive operating environments
Water Treatment Desalination skids, RO units, seawater intake and brine discharge systems Excellent pitting resistance in chloride-rich water service
Marine and Offshore Seawater cooling, ballast systems, deck piping and offshore module fabrication Durable corrosion performance and simplified maintenance in confined spaces

Why Choose SASA FLANGE?

  • ✓Professional manufacturer of Lap Joint Flange for global industrial projects
  • ✓Customized size, pressure class and material grade according to drawings
  • ✓Full standard support: ASME, EN, DIN, JIS, GB, GOST and customer specifications
  • ✓Material traceability with heat number control and EN 10204 3.1 material certificate
  • ✓Chemical analysis, mechanical testing, PMI testing, hydrostatic and dimensional inspection
  • ✓Stock availability for standard items, lead time 3-7 days; custom production 15-30 days
  • ✓Export-grade packaging for sea, air and land transportation
  • ✓15+ years experience supplying 50+ countries worldwide

FAQ

Q: What is a duplex 2205 lap joint flange?

A: A duplex 2205 lap joint flange is a loose backing flange used together with a lap joint stub end. The flange rotates freely around the pipe, making bolt hole alignment easier during installation. Made from duplex stainless steel ASTM A182 F51, it combines high mechanical strength with strong resistance to chloride corrosion in demanding industrial piping systems.

Q: What materials are available for duplex lap joint flanges?

A: The most common material is ASTM A182 F51 / UNS S32205, also known as duplex 2205. For more demanding corrosion environments, SASA FLANGE can also supply F60, super duplex F53 and F55 grades. Material selection depends on chloride content, operating temperature, pressure class and project specification or end-user approved vendor list.

Q: What pressure class is supported?

A: Duplex 2205 lap joint flanges are commonly supplied in ASME Class 150, 300, 600, 900 and 1500, depending on size and standard requirements. Under European systems, PN10 to PN100 can be produced. The actual available pressure rating depends on flange dimensions, material grade, service conditions and the corresponding stub end configuration.

Q: Can SASA FLANGE supply custom sizes?

A: Yes. SASA FLANGE can manufacture custom duplex 2205 lap joint flanges according to drawings or project specifications. We support non-standard dimensions, special drilling, custom facing, matched stub end fit-up, special markings and upgraded materials such as super duplex. CNC machining and strict dimensional inspection ensure compatibility with the customer’s piping system.

Q: What certificate is provided?

A: SASA FLANGE can provide EN 10204 3.1 material certificate together with the mill test certificate, dimensional inspection report and PMI records. Mechanical test results and chemical analysis are available according to the order requirement. For project packages, additional documentation such as packing list, heat number traceability and third-party inspection support can also be arranged.

Contact Us

If you are looking for duplex 2205 flanges or related custom flange products, please contact SASA FLANGE with your required size, pressure class, material grade, standard, surface treatment, quantity and inspection requirements. Our team will provide professional technical solutions and competitive quotation within 24 hours.

  • 📧 Email: sales@sasaflange.com
  • 📱 WhatsApp: +86 13764965049
  • ☎️ Tel: +86 21 52236361
  • 🌐 Website: www.sasaflange.com

Leave Your Message

    Send your size, material, standard and quantity. We will reply within 24 hours.

    Upload Image / Drawing (optional)

    Accepted: JPG, PNG, WebP or PDF. Maximum file size: 5 MB.