Description
Product Detail
Alloy 20 lap joint flanges are loose backing flanges used together with alloy 20 stub ends to create a practical flange connection for piping systems that require frequent dismantling, alignment flexibility and strong resistance to acidic media. Compared with welding neck or slip on designs, the lap joint type reduces flange contact with process fluid while maintaining convenient assembly. It is commonly specified for chemical processing, sulfuric acid handling, pickling lines, pharmaceutical plants and marine systems.
SASA FLANGE supplies alloy 20 lap joint flanges in standard and customized sizes according to ASME, EN, DIN, JIS and GB requirements. Each order can be supported with chemical analysis, mechanical testing, dimensional inspection, PMI testing, EN 10204 3.1 certificate and full heat number traceability to meet project, EPC and end-user documentation requirements.
- ✓Product Name: Alloy 20 Lap Joint Flange
- ✓Material Grade: ASTM B462 UNS N08020 / Alloy 20
- ✓Product Type: Lap Joint Flange for use with stub end
- ✓Main Feature: Excellent resistance to sulfuric acid, chlorides and general chemical corrosion with easy bolt alignment
- ✓Applications: Chemical processing, fertilizer, pharmaceutical, offshore, pickling and acid transfer pipelines
Product Parameters
| Product Name | Alloy 20 Lap Joint Flange |
| Material Grade | ASTM B462 UNS N08020, Alloy 20 CB3, Carpenter 20 equivalent, Werkstoff 2.4660 |
| Material Type | Nickel-Iron-Chromium austenitic corrosion-resistant alloy |
| Product Form | Forged or plate machined lap joint flange used with stub end |
| Size Range | DN15 – DN600 (1/2 inch – 24 inch) |
| Pressure Class | Class 150 – 600 / PN10 – PN40 |
| Sealing Face | Flat Face, Raised Face, stub-end seating face as per lap joint design |
| Surface Treatment | Pickling, passivation, machined finish, protective oil on machined surfaces |
| Standard | ASME B16.5, EN 1092-1, DIN, JIS B2220, GB/T 9119 or customer specification |
| Inspection | Chemical Analysis, Mechanical Test, PMI Test, Dimensional Inspection, Visual Inspection |
| Certificate | EN 10204 3.1 Material Certificate available |
| Processing Service | Cutting, CNC Machining, Custom Drilling, Custom Size Processing |
Chemical Composition
The following chemical composition is for reference for standard Alloy 20 material used in flange production. Exact values may vary slightly by melting route, product form and applicable ASTM specification. Final composition is confirmed by the material test certificate and must comply with the ordered standard and project requirements.
| Element | C | Si | Mn | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|---|
| Content % | 0.07 max | 1.00 max | 2.00 max | 0.045 max | 0.035 max | 19.0 – 21.0 | 32.0 – 38.0 | 2.0 – 3.0 | Cu 3.0 – 4.0, Nb 8xC min to 1.0 max, Fe balance |
Mechanical Properties
Mechanical properties shown below are typical reference values for Alloy 20 flange material in annealed condition. Actual results may vary depending on grade specification, forging process, heat treatment and section thickness. Project acceptance values should always be verified against the applicable ASTM standard and certified inspection documents.
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | Density |
|---|---|---|---|---|---|
| UNS N08020 Annealed | 550 MPa min | 240 MPa min | 30% min | 217 HB max | 8.08 g/cm3 |
| Alloy 20 Forged Flange | 560 – 690 MPa | 245 – 345 MPa | 30% min | 210 HB max | 8.08 g/cm3 |
Common Size Table
| Size Range | Pressure Class | Sealing Face | Material | Availability |
|---|---|---|---|---|
| DN15 – DN50 | Class 150 – 300 | LJ with stub end seating | ASTM B462 UNS N08020 | Stock / Production |
| DN65 – DN150 | Class 150 – 600 | LJ with stub end seating | ASTM B462 UNS N08020 | Stock / Production |
| DN200 – DN300 | Class 150 – 600 | LJ with stub end seating | ASTM B462 UNS N08020 | Production |
| DN350 – DN600 | Class 150 – 300 | LJ with stub end seating | ASTM B462 UNS N08020 | Made to Order |
Different Specifications Comparison
| Type | Description | Typical Use |
|---|---|---|
| ASME Lap Joint Flange | Loose flange used with ASME stub end, commonly supplied to B16.5 dimensions | Chemical plants, skid systems, maintenance-friendly process lines |
| EN Lap Joint Flange | Loose flange produced to EN 1092-1 dimensions for use with matching collar or stub end | European process piping, water and chemical installations |
| Forged Alloy 20 LJ Flange | Made from forged Alloy 20 for improved integrity and controlled grain flow | Critical corrosive service and higher reliability requirements |
| Plate Machined Alloy 20 LJ Flange | Machined from alloy plate for selected sizes and project-specific dimensions | Low to medium pressure service and custom fabrication |
Equivalent Standards and International Names
Alloy 20 lap joint flanges can be manufactured to major international flange dimensional standards, while the material grade is specified by the applicable alloy standard. Equivalent names may differ by market, but UNS N08020 and Alloy 20 are the most widely recognized references for corrosion-resistant flange applications.
| Standard / Region | Standard Code | Typical Grade / Equivalent |
|---|---|---|
| USA | ASME B16.5 | ASTM B462 UNS N08020 / Alloy 20 |
| Europe | EN 1092-1 | Alloy 20 / 2.4660 equivalent by project specification |
| Germany | DIN 2527 / 2566 | Werkstoff 2.4660 / Alloy 20 equivalent |
| Japan | JIS B2220 | Alloy 20 equivalent on request |
| China | GB/T 9119 | UNS N08020 / Alloy 20 according to customer requirement |
Production Process Flow
SASA FLANGE controls each manufacturing stage for alloy 20 lap joint flanges to ensure corrosion performance, dimensional accuracy and reliable documentation. Material identity and machining precision are especially important for high-value nickel alloy products.
- 1. Raw Material Selection
- 2. Forging / Cutting
- 3. Heat Treatment
- 4. Rough Machining
- 5. Finish Machining
- 6. Drilling
- 7. Surface Treatment
- 8. Inspection
- 9. Marking
- 10. Packing
- 11. Delivery
| Process Step | Description | Quality Control Point |
|---|---|---|
| Raw Material | Select certified forging billets or plates | Material certificate and traceability |
| Forging | Hot forging to achieve required shape | Forging temperature and reduction ratio |
| Heat Treatment | Solution annealing or stress relief as required | Temperature and holding time control |
| Machining | Seating face, bolt holes and dimensions | Dimensional accuracy and surface finish |
| Inspection | Final inspection before shipment | Dimension, surface, PMI and marking verification |
Product Inspection
1. Chemical Composition Inspection
Chemical analysis is carried out to verify that the alloy 20 material meets the required composition range for chromium, nickel, molybdenum, copper and niobium, along with controlled carbon, sulfur and phosphorus levels. This inspection confirms the corrosion-resistant grade before machining and shipment, and results are referenced in the material certificate.
2. Mechanical Properties Testing
Mechanical testing is performed according to the applicable material standard to confirm tensile strength, yield strength, elongation and hardness values. These tests help ensure the flange material has suitable strength and ductility for fabrication and service. Test results are reviewed against ordered requirements and retained for quality documentation.
3. Dimensional Inspection
Each alloy 20 lap joint flange is checked for outside diameter, bore, thickness, bolt circle, bolt hole quantity and hole diameter according to the specified standard. The seating surface and overall flatness are also inspected to ensure proper fit-up with the stub end and accurate field assembly during installation.
4. PMI Testing and Hydrostatic Testing
PMI testing is available on each flange to verify alloy identity and prevent material mix-up in nickel alloy projects. Lap joint flanges are not pressure-containing by themselves, so hydrostatic testing is generally applied to the assembled piping system rather than the loose flange alone. EN 10204 3.1 certificate, MTC and inspection reports can be supplied.
Product Packaging
- ✓Wooden Case Packaging: Suitable for high-pressure and large-diameter products
- ✓Pallet Packing with Shrink Wrap: Suitable for batch shipments and standard sizes
- ✓Anti-rust Oil Coating + Waterproof Paper: Used for ocean freight protection
- ✓Individual Plastic Bag + Carton: Used for small fittings and threaded products
- ✓Clear Marking: Grade, size, pressure class, heat number and PO number
Applications
Alloy 20 lap joint flanges are widely used in piping systems handling corrosive fluids where flange alignment, dismantling convenience and material reliability are important. Their excellent resistance to sulfuric acid and many aggressive chemicals makes them suitable for process industries that demand long service life and dependable traceability.
| Industry | Typical Applications | Why This Product Is Used |
|---|---|---|
| Oil and Gas | Produced water systems, chemical injection lines, offshore utility piping | Provides corrosion resistance and easier flange alignment during maintenance |
| Chemical Processing | Sulfuric acid lines, reactors, storage transfer piping, pickling systems | Alloy 20 offers strong resistance to acidic media and chloride-related attack |
| Power Generation | FGD systems, chemical dosing lines, auxiliary corrosive service piping | Supports reliable service in aggressive wet chemical environments |
| Water Treatment | Dosing skids, acid regeneration systems, specialty treatment units | Suitable where chemicals and repeated dismantling are involved |
| Marine and Offshore | Corrosive service modules, platform process skids, maintenance-access piping | Loose flange design simplifies installation and replacement in restricted spaces |
Why Choose SASA FLANGE?
- ✓Professional manufacturer of Lap Joint Flange for global industrial projects
- ✓Customized size, pressure class and material grade according to drawings
- ✓Full standard support: ASME, EN, DIN, JIS, GB, GOST and customer specifications
- ✓Material traceability with heat number control and EN 10204 3.1 material certificate
- ✓Chemical analysis, mechanical testing, PMI testing, hydrostatic and dimensional inspection
- ✓Stock availability for standard items, lead time 3-7 days; custom production 15-30 days
- ✓Export-grade packaging for sea, air and land transportation
- ✓15+ years experience supplying 50+ countries worldwide
FAQ
Q: What is an alloy 20 lap joint flange?
A: An alloy 20 lap joint flange is a loose backing flange used together with an alloy 20 stub end. The flange does not contact the process medium directly in the same way as an integral flange face, which helps reduce cost in some designs while allowing easy alignment, quick dismantling and good corrosion performance in aggressive chemical piping systems.
Q: What materials are available for alloy 20 lap joint flanges?
A: The main material is ASTM B462 UNS N08020, also known as Alloy 20 or Carpenter 20 equivalent. Depending on project requirements, SASA FLANGE can also offer matching stub ends and related corrosion-resistant flange products in stainless steel, duplex stainless steel, nickel alloys and other special materials with full traceability and certified documentation.
Q: What pressure class is supported?
A: For alloy 20 lap joint flanges, the common supply range is ASME Class 150, 300 and 600, with selected EN and DIN pressure ratings such as PN10, PN16, PN25 and PN40. Higher-pressure designs are reviewed according to size, standard, material availability and the mating stub end configuration required by the piping system.
Q: Can SASA FLANGE supply custom sizes?
A: Yes. SASA FLANGE can supply custom alloy 20 lap joint flanges based on drawings or project specifications, including non-standard drilling, special bore sizes, customized dimensions, special facing requirements and matched stub ends. We support ASME, EN, DIN, JIS and GB dimensions as well as OEM machining for skid fabricators, EPC contractors and end users.
Q: What certificate is provided?
A: SASA FLANGE can provide EN 10204 3.1 material certificate, mill test certificate, heat number traceability, dimensional inspection reports and PMI records for alloy 20 lap joint flanges. Additional documentation can be arranged according to order requirements. For assembled pressure systems, hydrostatic test records are generally issued at piping or system level rather than for the loose flange itself.
Contact Us
If you are looking for alloy 20 flanges or related custom flange products, please contact SASA FLANGE with your required size, pressure class, material grade, standard, surface treatment, quantity and inspection requirements. Our team will provide professional technical solutions and competitive quotation within 24 hours.
- 📧 Email: sales@sasaflange.com
- 📱 WhatsApp: +86 13764965049
- ☎️ Tel: +86 21 52236361
- 🌐 Website: www.sasaflange.com









