Description
Product Detail
Incoloy 800 lap joint flanges are loose-type flanges used together with a stub end, allowing easy alignment, simplified installation and convenient dismantling of piping systems. Manufactured from nickel-iron-chromium alloy, they offer excellent resistance to oxidation, carburization and many high-temperature corrosive environments. These flanges are widely used in thermal processing equipment, petrochemical lines, chemical plants, heat exchangers, offshore systems and power generation units where both corrosion resistance and service stability are required.
SASA FLANGE supplies Incoloy 800 lap joint flanges in standard and customized dimensions according to ASME, EN, DIN, JIS and GB requirements. Each order can be supported by chemical analysis, mechanical testing, dimensional inspection, PMI testing, EN 10204 3.1 certificate and full heat number traceability to meet international project and end-user specifications.
- ✓Product Name: Incoloy 800 Lap Joint Flanges
- ✓Material Grade: Incoloy 800 / 800H / 800HT, UNS N08800 / N08810 / N08811
- ✓Product Type: Lap Joint Flange used with Stub End
- ✓Main Feature: Excellent high-temperature oxidation and carburization resistance with easy alignment during installation
- ✓Applications: Petrochemical, heat treatment, power generation, marine, offshore and chemical processing pipelines
Product Parameters
| Product Name | Incoloy 800 Lap Joint Flange |
| Material Grade | Incoloy 800, Incoloy 800H, Incoloy 800HT, UNS N08800, UNS N08810, UNS N08811 |
| Material Type | Nickel-Iron-Chromium Heat Resistant Alloy |
| Product Form | Forged Lap Joint Flange / Machined Lap Joint Flange |
| Size Range | DN15 – DN1500 (1/2 inch – 60 inch) |
| Pressure Class | Class 150 – 2500 / PN6 – PN100 |
| Sealing Face | RF, FF, RTJ, Tongue and Groove, Male and Female |
| Surface Treatment | Natural machined, pickled, passivated, protective oil on machined surface |
| Standard | ASME B16.5, ASME B16.47, EN 1092-1, DIN 2642, JIS B2220, GB/T 9119 or customer specification |
| Inspection | Chemical Analysis, Mechanical Test, PMI Test, Dimensional Inspection, Hydrostatic Test when required |
| Certificate | EN 10204 3.1 Material Certificate available |
| Processing Service | Cutting, CNC Machining, Custom Drilling, Custom Size Processing |
Chemical Composition
The following chemical composition is for reference for standard Incoloy 800 material used for lap joint flanges. Actual composition may vary slightly by grade such as 800, 800H or 800HT, melting route and applicable specification. Final delivered chemistry shall conform to the relevant ASTM or EN standard and the mill test certificate.
| Element | C | Si | Mn | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|---|
| Content % | 0.10 max | 1.00 max | 1.50 max | 0.030 max | 0.015 max | 19.0 – 23.0 | 30.0 – 35.0 | 0.75 max | Fe balance, Al 0.15 – 0.60, Ti 0.15 – 0.60, Cu 0.75 max |
Mechanical Properties
Mechanical properties shown below are typical reference values for commonly specified Incoloy 800 grades used in flange production. Actual test results can vary depending on grade, solution annealed condition, section thickness and forging process. SASA FLANGE verifies required tensile and hardness values according to applicable material standards and project specifications.
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | Density |
|---|---|---|---|---|---|
| Incoloy 800 (UNS N08800) | 520 MPa min | 205 MPa min | 30% min | 170 HB max | 7.94 g/cm3 |
| Incoloy 800H/800HT (UNS N08810/N08811) | 450 MPa min | 170 MPa min | 30% min | 179 HB max | 7.94 g/cm3 |
Common Size Table
| Size Range | Pressure Class | Sealing Face | Material | Availability |
|---|---|---|---|---|
| DN15 – DN50 | Class 150 – 600 | RF | Incoloy 800 / 800H | Stock / Production |
| DN65 – DN300 | Class 150 – 1500 | RF / RTJ | Incoloy 800 / 800H / 800HT | Stock / Production |
| DN350 – DN600 | Class 150 – 2500 | RF / RTJ | Incoloy 800 / 800HT | Production |
| DN700 – DN1500 | Class 150 – 900 | RF | Incoloy 800 | Made to Order |
Different Specifications Comparison
| Type | Description | Typical Use |
|---|---|---|
| ASME Lap Joint Flange | Loose flange used with lap joint stub end according to ASME dimensions | Petrochemical and process piping requiring easy dismantling |
| EN Lap Joint Flange | Flange manufactured to EN 1092-1 dimensions for use with corresponding stub ends | European industrial plants and pressure piping systems |
| Raised Face Lap Joint Flange | Machined with raised face contact profile where specified by project design | Higher pressure systems needing controlled gasket seating |
| Flat Face Lap Joint Flange | Flat seating surface suitable for full face gasket arrangements | Low to medium pressure lines and utility services |
Equivalent Standards and International Names
Incoloy 800 lap joint flanges can be produced to major international flange standards, while the material grade is generally referenced by UNS, ASTM or EN alloy designation. Equivalent naming may differ by region, but dimensional, inspection and certification requirements can be matched to the customer standard for global procurement and project compliance.
| Standard / Region | Standard Code | Typical Grade / Equivalent |
|---|---|---|
| USA | ASME B16.5 | Incoloy 800 / UNS N08800, 800H / N08810, 800HT / N08811 |
| Europe | EN 1092-1 | Alloy 800 equivalent Ni-Fe-Cr heat resistant alloy to customer material specification |
| Germany | DIN 2642 / 2673 | Werkstoff equivalent by customer request for lap joint flange and loose flange applications |
| Japan | JIS B2220 | Incoloy 800 equivalent nickel alloy material as per project requirement |
| China | GB/T 9119 | NS1101 / UNS N08800 equivalent subject to approved material specification |
Production Process Flow
SASA FLANGE controls each manufacturing stage of Incoloy 800 lap joint flanges to ensure alloy integrity, dimensional accuracy and reliable service performance in high-temperature and corrosive piping systems.
- 1. Raw Material Selection
- 2. Forging / Cutting
- 3. Heat Treatment
- 4. Rough Machining
- 5. Finish Machining
- 6. Drilling
- 7. Surface Treatment
- 8. Inspection
- 9. Marking
- 10. Packing
- 11. Delivery
| Process Step | Description | Quality Control Point |
|---|---|---|
| Raw Material | Select certified forging billets or plates | Material certificate and traceability |
| Forging | Hot forging to achieve required shape | Forging temperature and reduction ratio |
| Heat Treatment | Solution annealing or controlled heat treatment as specified | Temperature and holding time control |
| Machining | Sealing face, bolt holes, dimensions | Dimensional accuracy and surface finish |
| Inspection | Final inspection before shipment | Dimension, surface, PMI, hydrostatic |
Product Inspection
1. Chemical Composition Inspection
Chemical analysis is carried out to verify that the Incoloy 800 alloy meets specified limits for nickel, chromium, carbon, manganese, silicon and other controlled elements. This inspection confirms correct material grade before production and shipment, helping ensure high-temperature corrosion resistance and compliance with applicable ASTM, EN or customer specifications.
2. Mechanical Properties Testing
Mechanical testing verifies tensile strength, yield strength, elongation and hardness of the flange material after required heat treatment. These tests confirm the forged Incoloy 800 lap joint flange has the necessary strength and ductility for service. Test results are reviewed against applicable standards and can be included in the mill test certificate.
3. Dimensional Inspection
Dimensional inspection covers outside diameter, inside diameter, thickness, bolt circle, bolt hole size, number of holes and facing geometry. For lap joint flanges, accurate seating and matching with the stub end are critical. SASA FLANGE inspects each batch to ensure compliance with ASME, EN, DIN, JIS, GB or custom drawings.
4. PMI Testing and Hydrostatic Testing
Positive Material Identification is performed to confirm alloy grade and prevent mixed material risk, especially for nickel alloy orders. Hydrostatic pressure testing can be arranged when required by project specifications or end users. EN 10204 3.1 certificate, heat number traceability and relevant inspection reports are supplied to support quality assurance and documentation.
Product Packaging
- ✓Wooden Case Packaging: Suitable for high-pressure and large-diameter products
- ✓Pallet Packing with Shrink Wrap: Suitable for batch shipments and standard sizes
- ✓Anti-rust Oil Coating + Waterproof Paper: Used for ocean freight protection
- ✓Individual Plastic Bag + Carton: Used for small fittings and threaded products
- ✓Clear Marking: Grade, size, pressure class, heat number and PO number
Applications
Incoloy 800 lap joint flanges are selected for piping systems operating in high-temperature, oxidizing and moderately corrosive environments. Their loose flange design simplifies installation and maintenance, while the alloy provides long-term performance where conventional stainless steel may not be sufficient. They are commonly specified in process industries requiring heat resistance, corrosion control and reliable traceable materials.
| Industry | Typical Applications | Why This Product Is Used |
|---|---|---|
| Oil and Gas | Heater lines, hot process piping, refinery transfer systems | Provides oxidation resistance and easier maintenance with lap joint assembly |
| Chemical Processing | Acid service support lines, reactors, heat exchangers, process piping | Nickel alloy resists aggressive media and elevated operating temperatures |
| Power Generation | Boiler auxiliary lines, high-temperature utility piping, emission control systems | Maintains strength and service stability under thermal cycling conditions |
| Water Treatment | Special chemical dosing systems and high-chloride auxiliary process lines | Offers improved corrosion resistance where standard alloys are inadequate |
| Marine and Offshore | Offshore module piping, exhaust-related systems, corrosive service utilities | Good resistance to harsh environments with convenient flange alignment and replacement |
Why Choose SASA FLANGE?
- ✓Professional manufacturer of Lap Joint Flange for global industrial projects
- ✓Customized size, pressure class and material grade according to drawings
- ✓Full standard support: ASME, EN, DIN, JIS, GB, GOST and customer specifications
- ✓Material traceability with heat number control and EN 10204 3.1 material certificate
- ✓Chemical analysis, mechanical testing, PMI testing, hydrostatic and dimensional inspection
- ✓Stock availability for standard items, lead time 3-7 days; custom production 15-30 days
- ✓Export-grade packaging for sea, air and land transportation
- ✓15+ years experience supplying 50+ countries worldwide
FAQ
Q: What is an Incoloy 800 lap joint flange?
A: An Incoloy 800 lap joint flange is a loose backing flange used together with a stub end in piping systems. It is made from a nickel-iron-chromium alloy known for high-temperature oxidation and carburization resistance. This flange design allows easier bolt alignment, faster installation and simpler maintenance compared with many fixed-face flange arrangements.
Q: What materials are available for Incoloy 800 lap joint flanges?
A: SASA FLANGE can supply lap joint flanges in Incoloy 800, Incoloy 800H and Incoloy 800HT, corresponding to UNS N08800, N08810 and N08811. Depending on project requirements, we can also discuss other nickel alloy grades for similar service conditions. Material selection is based on temperature, corrosion environment, pressure class and end-user specification.
Q: What pressure class is supported?
A: Incoloy 800 lap joint flanges are commonly supplied from ASME Class 150 up to Class 2500, depending on size, design standard and project requirements. EN and DIN pressure ratings such as PN6 to PN100 are also available. The actual supported range depends on dimensional standard, alloy form and whether the flange is standard or specially machined.
Q: Can SASA FLANGE supply custom sizes?
A: Yes. SASA FLANGE supplies both standard and custom Incoloy 800 lap joint flanges based on drawings or technical specifications. We can provide special drilling, non-standard outside diameter, custom bore, facing type, matching stub end dimensions and project-specific markings. Customized production is suitable for replacement parts, OEM requirements and special industrial systems.
Q: What certificate is provided?
A: We can provide EN 10204 3.1 material certificate together with mill test reports, heat number traceability and dimensional inspection records. PMI testing reports are available for alloy confirmation, and hydrostatic or additional NDT documentation can be arranged if required. Documentation packages are prepared to match project, EPC, trader or end-user quality requirements.
Contact Us
If you are looking for incoloy 800 flanges or related custom flange products, please contact SASA FLANGE with your required size, pressure class, material grade, standard, surface treatment, quantity and inspection requirements. Our team will provide professional technical solutions and competitive quotation within 24 hours.
- 📧 Email: sales@sasaflange.com
- 📱 WhatsApp: +86 13764965049
- ☎️ Tel: +86 21 52236361
- 🌐 Website: www.sasaflange.com








