Beschreibung
Produktspezifikationen und technische Daten
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
- ✓Good corrosion resistance at elevated temperatures
- ✓High temperature mechanical stability up to 2200°F (982°C)
- ✓High strength material with excellent toughness at elevated temperatures
- ✓Inconel-Sorten: 600, 601, 625, 686, 718, 725, X750
- ✓In-depth insight on Alloy 625 und Legierung 718
- ✓Slip on flange features and benefits
- ✓Datasheets available on Inconel 625 und Inconel 718
Inconel® slip on flanges, like Inconel 600, 601, 625, 686, 718 & 725 Aufsteckflansche, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel slip on flanges can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel slip on flanges enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel slip on flanges. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel slip on flanges offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, Luft- und Raumfahrt, Marine, electronics and oil & Gas.
The most common grades of Inconel nickel alloy flanges are Inconel 625 und Inconel 718. Gain more insight on these two grades by accessing our Inconel 625 und Inconel 718 Übersichten oder kontaktieren Sie unsere Engineering-Experten.
Verfügbare Flanschtypen: Blindflansche, Überlappungsflansche, Aufsteckflansche, Muffenschweißflansche, Gewindeflansche, Vorschweißflansche
Referenz zu Flanschabmessungen
Inconel Slip on Flanges Built for Demanding slip on pipe flange Service
SASA FLANGE supplies Inconel Slip on Flanges as a family of Ni-Cr and nickel-chromium-molybdenum alloys valued for good corrosion resistance and high temperature mechanical stability.
These flanges perform from cryogenic service up to 2200°F (982°C), making each slip on pipe flange suitable for severe thermal duty.
Their high alloy content supports use in high temperature steam, power plant systems, and petrochemical cracking environments where toughness, Stärke, and corrosion resistance must work together.
Inconel Slip on Flanges Grade Matrix and Standards Depth
SASA FLANGE offers Inconel Slip on Flanges in grades 600, 601, 625, 686, 718, 725, and X750.
Legierung 600 UNS N06600 resists carburization and oxidation through 2000°F; Legierung 601 UNS N06601 resists oxidation through 2200°F; Legierung 625 UNS N06625 is oxidation resistant to 1800°F and supports ISO 15156-3 Und NACE MR0175-3; Legierung 718 UNS N07718 delivers creep-rupture strength to 1300°F.
Specifications cited include AMS, ASME, ASTM, EN, DIN, Werkstoff, and UNS designations.
Inconel Slip on Flanges Across Heat, Chemisch, and Power Frontiers
SASA FLANGE Inconel Slip on Flanges are selected for chemical processing where oxidizing chemicals, reduzierende Säuren, and severe corrosive media demand durable sealing connections.
In marine and petrochemical cracking service, the material withstands atmosphere, sea water, scrubber environments, and pitting or crevice corrosion.
Für Hochtemperatur-Dampfsysteme, aerospace hardware, Elektronik, Öl und Gas, and nuclear reactor related duty, these alloys combine elevated temperature strength, Zähigkeit, und thermische Stabilität.
Fast-Track Inconel Slip on Flanges from SASA FLANGE Heute
Wählen SASA FLANGE for Inconel Slip on Flanges when buyers need a balanced combination of corrosion resistance, temperature stability, hohe Festigkeit, and toughness in one slip on pipe flange solution.
We support made-to-order supply with 15-30 Tage Produktion und ISO 9001:2015 Qualitätssicherung.
For urgent fast delivery requirements covering common grades like 625 Und 718, Kontaktieren Sie sales@sasaflange.com oder WhatsApp +86 13764965049 to discuss your application and sourcing schedule.
Warum wählen? SASA FLANGE?
Mehrere DruckklassenPressure class data is not specified in source, while the product is presented for severe and elevated-temperature service applications. |
Präzise MaßtoleranzenDimensional tolerance values are not specified in source, but slip on flange construction supports practical installation across industrial systems. |
KorrosionsbeständigHigh alloy content helps resist atmosphere, sea water, neutral salts, alkaline media, oxidizing chemicals, and nonoxidizing environments. |
ISO 9001 ZertifiziertISO 15156-3 is referenced in the source for Inconel 625, supporting recognized material specification requirements. |
Wettbewerbsfähige PreiseCommon grades such as Inconel 625 und Inconel 718 support broad industrial use across chemical, Marine, and energy sectors. |
Weltweiter VersandSuitable for international industries including aerospace, Marine, Elektronik, chemische Verarbeitung, und Öl & Gasanwendungen. |
slip on pipe flange Application Scenario
The slip on pipe flange is widely deployed across critical industrial sectors where reliable pipe sealing and pressure containment are essential. Zu den typischen Anwendungsszenarien gehören::
Von Hochdruck-Raffinerierohren bis hin zu kommunalen Wasserverteilungsnetzen, the slip on pipe flange ensures leak-free connections and long-term service reliability in demanding environments.
slip on pipe flange installed in industrial piping system
Häufig gestellte Fragen
Q: What is a slip on pipe flange used for?
A: A slip on pipe flange is used to connect pipe, Ventile, Pumps, and fittings where easy alignment and welding are required. The pipe slips through the bore, then fillet welds are applied inside and outside for strength. Inconel slip on flanges are selected for corrosive, hohe Temperatur, and cryogenic service, including oxidizing and chloride-containing environments, with alloy capability ranging from cryogenic duty up to 2200°F depending on grade.
Q: What materials are available for slip on pipe flange?
A: SASA FLANGE supplies slip on flanges in Inconel 600, 601, 625, 686, 718, 725, and X750. These nickel-chromium and nickel-chromium-molybdenum alloys cover strong corrosion, Oxidation, and high-temperature requirements. Common material designations include UNS N06600, N06601, and N06625, with EN grades 2.4816, 2.4851, Und 2.4856. Material is produced to standards such as ASTM B166, B167, B168, B443, B446, and ASTM/ASME SB564.
Q: What pressure ratings does a slip on pipe flange support?
A: Die Druckstufe hängt von den Flanschabmessungen ab, Materialqualität, Betriebstemperatur, and the governing flange standard. For Inconel slip on flanges, SASA FLANGE manufactures to customer-specified pressure classes because the source data does not define a fixed class range. Temperature capability is grade-specific: Legierung 600 to 2000°F, Legierung 601 to 2200°F, Legierung 625 oxidation resistance to 1800°F, und Legierung 718 to 1300°F.
Q: What standards does a slip on pipe flange comply with?
A: These slip on flanges are produced from Inconel materials compliant with major ASTM, ASME, AMS, EN, DIN, ISO, and NACE requirements. Covered specifications include ASTM B166, B167, B168, B443, B446, B462, B564, B574; ASME SB166, SB167, SB168, SB443, SB446, SB564; AMS 5540, 5665, 5666, 5837, 5596; EN 2.4816, 2.4851, 2.4856; ISO 15156-3; NACE MR0175-3. MTC is supplied per EN 10204 3.1.
Q: What is the lead time for custom slip on pipe flange orders?
A: Custom slip on flange orders typically require 15-30 Tage, depending on Inconel grade, Größe, Bearbeitungsumfang, und Inspektionsanforderungen. Stock items are normally available in 3-7 Tage. SASA FLANGE has over 15 years of manufacturing experience and operates under ISO 9001:2015 quality control. Each shipment can include EN 10204 3.1 Materialprüfzeugnisse. For urgent schedules, Kontaktieren Sie sales@sasaflange.com oder WhatsApp +86 13764965049.
Verpackung und Versand
📦 Die Verpackung ist besonders bei internationalen Sendungen sehr wichtig, bei denen die Sendungen verschiedene Kanäle durchlaufen, um den endgültigen Bestimmungsort zu erreichen, Deshalb legen wir besonderen Wert auf die Verpackung, um sicherzustellen, dass jedes Stück in einwandfreiem Zustand ankommt.
SASA FLANGE verpackt Waren je nach Produkttyp und Kundenanforderungen auf vielfältige Weise. Zu unseren Standardverpackungsoptionen gehören::
- Sperrholzkisten / Kisten – für schwere Flansche und Produkte mit großem Durchmesser
- Paletten mit Schrumpffolie – für Großbestellungen und Standardgrößen
- Einzelne Polybeutel + Kartons – für kleine Flansche und Armaturen
- Anti-Rost-Ölbeschichtung + wasserfestes Papier – für die Seefracht über große Entfernungen
- Individuelle Markierung und Etikettierung – gemäß Kundenspezifikationen oder Projektanforderungen
Alle Verpackungen entsprechen internationalen Exportstandards. Spezielle Verpackungsanweisungen sind auf Anfrage gerne möglich.
