Описание
Характеристики продукта и технические данные
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
- ✓Good corrosion resistance at elevated temperatures
- ✓High temperature mechanical stability up to 2200°F (982°С)
- ✓High strength material with excellent toughness at elevated temperatures
- ✓Inconel grades: 600, 601, 625, 686, 718, 725, X750
- ✓In-depth insight on Alloy 625 and Alloy 718
- ✓Slip on flange features and benefits
- ✓Datasheets available on Inconel 625 and Inconel 718
Inconel® slip on flanges, like Inconel 600, 601, 625, 686, 718 & 725 slip on flanges, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel slip on flanges can be used in service temperatures ranging from cryogenic to 2200°F (982°С). The high alloy content of Inconel slip on flanges enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel slip on flanges. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel slip on flanges offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, аэрокосмический, морской, electronics and oil & газ.
The most common grades of Inconel nickel alloy flanges are Inconel 625 and Inconel 718. Gain more insight on these two grades by accessing our Inconel 625 and Inconel 718 overviews or by contacting our engineering experts.
Доступные типы фланцев: Слепые фланцы, Фланцы внахлестку, Наденьте фланцы, Фланцы под приварку враструб, Резьбовые фланцы, Фланцы с приварной горловиной
Справочная информация по размерам фланцев
Inconel Slip on Flanges Built for Demanding slip on pipe flange Service
SASA FLANGE supplies Inconel Slip on Flanges as a family of Ni-Cr and nickel-chromium-molybdenum alloys valued for good corrosion resistance and high temperature mechanical stability.
These flanges perform from cryogenic service up to 2200°F (982°С), making each slip on pipe flange suitable for severe thermal duty.
Their high alloy content supports use in high temperature steam, power plant systems, and petrochemical cracking environments where toughness, сила, and corrosion resistance must work together.
Inconel Slip on Flanges Grade Matrix and Standards Depth
SASA FLANGE offers Inconel Slip on Flanges in grades 600, 601, 625, 686, 718, 725, and X750.
Сплав 600 UNS N06600 resists carburization and oxidation through 2000°F; Сплав 601 UNS N06601 resists oxidation through 2200°F; Сплав 625 UNS N06625 is oxidation resistant to 1800°F and supports ISO 15156-3 и NACE MR0175-3; Сплав 718 UNS N07718 delivers creep-rupture strength to 1300°F.
Specifications cited include AMS, ASME, ASTM, EN, DIN, материал, and UNS designations.
Inconel Slip on Flanges Across Heat, Химическая, and Power Frontiers
SASA FLANGE Inconel Slip on Flanges are selected for chemical processing where oxidizing chemicals, восстанавливающие кислоты, and severe corrosive media demand durable sealing connections.
In marine and petrochemical cracking service, the material withstands atmosphere, sea water, scrubber environments, and pitting or crevice corrosion.
For high temperature steam systems, aerospace hardware, электроника, нефть и газ, and nuclear reactor related duty, these alloys combine elevated temperature strength, прочность, и термическая стабильность.
Fast-Track Inconel Slip on Flanges from SASA FLANGE Today
Выбирать SASA FLANGE for Inconel Slip on Flanges when buyers need a balanced combination of corrosion resistance, temperature stability, высокая прочность, and toughness in one slip on pipe flange solution.
We support made-to-order supply with 15-30 days production and ISO 9001:2015 quality assurance.
For urgent fast delivery requirements covering common grades like 625 и 718, свяжитесь с нами по адресу sales@sasaflange.com или WhatsApp. +86 13764965049 to discuss your application and sourcing schedule.
Почему выбирают SASA FLANGE?
Несколько классов давленияPressure class data is not specified in source, while the product is presented for severe and elevated-temperature service applications. |
Точные размерные допускиDimensional tolerance values are not specified in source, but slip on flange construction supports practical installation across industrial systems. |
КоррозионностойкийHigh alloy content helps resist atmosphere, sea water, neutral salts, alkaline media, oxidizing chemicals, and nonoxidizing environments. |
ISO 9001 ПроверенныйISO 15156-3 is referenced in the source for Inconel 625, supporting recognized material specification requirements. |
Конкурентные ценыCommon grades such as Inconel 625 and Inconel 718 support broad industrial use across chemical, морской, и энергетический сектор. |
Глобальная доставкаSuitable for international industries including aerospace, морской, электроника, химическая обработка, и нефть & gas applications. |
slip on pipe flange Application Scenario
The slip on pipe flange is widely deployed across critical industrial sectors where reliable pipe sealing and pressure containment are essential. Типичные сценарии применения включают в себя:
От нефтеперерабатывающих трубопроводов высокого давления до городских сетей водоснабжения, the slip on pipe flange ensures leak-free connections and long-term service reliability in demanding environments.
slip on pipe flange installed in industrial piping system
Часто задаваемые вопросы
вопрос: What is a slip on pipe flange used for?
А: A slip on pipe flange is used to connect pipe, клапаны, насосы, and fittings where easy alignment and welding are required. The pipe slips through the bore, then fillet welds are applied inside and outside for strength. Inconel slip on flanges are selected for corrosive, высокотемпературный, and cryogenic service, including oxidizing and chloride-containing environments, with alloy capability ranging from cryogenic duty up to 2200°F depending on grade.
вопрос: What materials are available for slip on pipe flange?
А: SASA FLANGE supplies slip on flanges in Inconel 600, 601, 625, 686, 718, 725, and X750. These nickel-chromium and nickel-chromium-molybdenum alloys cover strong corrosion, окисление, and high-temperature requirements. Common material designations include UNS N06600, N06601, and N06625, with EN grades 2.4816, 2.4851, и 2.4856. Material is produced to standards such as ASTM B166, B167, B168, B443, B446, and ASTM/ASME SB564.
вопрос: What pressure ratings does a slip on pipe flange support?
А: Pressure rating depends on flange dimensions, сорт материала, рабочая температура, and the governing flange standard. For Inconel slip on flanges, SASA FLANGE manufactures to customer-specified pressure classes because the source data does not define a fixed class range. Temperature capability is grade-specific: Сплав 600 to 2000°F, Сплав 601 to 2200°F, Сплав 625 oxidation resistance to 1800°F, and Alloy 718 to 1300°F.
вопрос: What standards does a slip on pipe flange comply with?
А: These slip on flanges are produced from Inconel materials compliant with major ASTM, ASME, AMS, EN, DIN, ISO, and NACE requirements. Covered specifications include ASTM B166, B167, B168, B443, B446, B462, B564, B574; ASME SB166, SB167, SB168, SB443, SB446, SB564; AMS 5540, 5665, 5666, 5837, 5596; EN 2.4816, 2.4851, 2.4856; ISO 15156-3; NACE MR0175-3. MTC is supplied per EN 10204 3.1.
вопрос: What is the lead time for custom slip on pipe flange orders?
А: Custom slip on flange orders typically require 15-30 дни, depending on Inconel grade, размер, machining scope, и требования к проверке. Stock items are normally available in 3-7 дни. SASA FLANGE закончился 15 многолетний опыт производства и работает под ISO 9001:2015 контроль качества. Each shipment can include EN 10204 3.1 material test certificates. For urgent schedules, свяжитесь с нами по адресу sales@sasaflange.com или WhatsApp. +86 13764965049.
Упаковка и доставка
📦 Упаковка очень важна, особенно в случае международных отправлений, при которых грузы проходят через различные каналы, чтобы добраться до конечного пункта назначения., поэтому мы уделяем особое внимание упаковке, чтобы каждая деталь была доставлена в идеальном состоянии..
SASA FLANGE упаковывает товары различными способами в зависимости от типа продукта и требований клиента. Наши стандартные варианты упаковки включают в себя:
- Фанерные ящики / ящики – для тяжелых фланцев и изделий большого диаметра
- Поддоны с термоусадочной пленкой – для оптовых заказов и стандартных размеров
- Индивидуальные полиэтиленовые пакеты + картонные коробки – для небольших фланцев и фитингов
- Антикоррозионное масляное покрытие + водонепроницаемая бумага – для морских перевозок на дальние расстояния
- Индивидуальная маркировка и маркировка – по спецификациям заказчика или требованиям проекта
Вся упаковка соответствует международным экспортным стандартам.. Специальные инструкции по упаковке приветствуются по запросу..
