وصف
مواصفات المنتج والبيانات الفنية
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
- ✓Good corrosion resistance at elevated temperatures
- ✓High temperature mechanical stability up to 2200°F (982درجة مئوية)
- ✓High strength material with excellent toughness at elevated temperatures
- ✓درجات إنكونيل: 600, 601, 625, 686, 718, 725, X750
- ✓In-depth insight on Alloy 625 and Alloy 718
- ✓الانزلاق على ميزات وفوائد الحافة
- ✓Datasheets available on Inconel 625 و إنكونيل 718
Inconel® slip on flanges, like Inconel 600, 601, 625, 686, 718 & 725 slip on flanges, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel slip on flanges can be used in service temperatures ranging from cryogenic to 2200°F (982درجة مئوية). The high alloy content of Inconel slip on flanges enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel slip on flanges. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel slip on flanges offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, الفضاء الجوي, البحرية, electronics and oil & غاز.
The most common grades of Inconel nickel alloy flanges are Inconel 625 و إنكونيل 718. Gain more insight on these two grades by accessing our Inconel 625 و إنكونيل 718 لمحات عامة أو عن طريق الاتصال بخبرائنا الهندسيين.
أنواع شفة المتاحة: الشفاه العمياء, الشفاه المشتركة اللفة, الانزلاق على الشفاه, الشفاه لحام المقبس, الشفاه مترابطة, لحام الشفاه الرقبة
مرجع أبعاد شفة
Inconel Slip on Flanges Built for Demanding slip on pipe flange Service
SASA FLANGE supplies Inconel Slip on Flanges as a family of Ni-Cr and nickel-chromium-molybdenum alloys valued for good corrosion resistance and high temperature mechanical stability.
These flanges perform from cryogenic service up to 2200°F (982درجة مئوية), making each slip on pipe flange suitable for severe thermal duty.
Their high alloy content supports use in high temperature steam, power plant systems, and petrochemical cracking environments where toughness, قوة, and corrosion resistance must work together.
Inconel Slip on Flanges Grade Matrix and Standards Depth
SASA FLANGE offers Inconel Slip on Flanges in grades 600, 601, 625, 686, 718, 725, and X750.
سبيكة 600 UNS N06600 resists carburization and oxidation through 2000°F; سبيكة 601 UNS N06601 resists oxidation through 2200°F; سبيكة 625 UNS N06625 is oxidation resistant to 1800°F and supports ISO 15156-3 و NACE MR0175-3; سبيكة 718 UNS N07718 delivers creep-rupture strength to 1300°F.
Specifications cited include AMS, ASME, ASTM, EN, DIN, مادة, and UNS designations.
Inconel Slip on Flanges Across Heat, كيميائي, and Power Frontiers
SASA FLANGE Inconel Slip on Flanges are selected for chemical processing where oxidizing chemicals, تقليل الأحماض, and severe corrosive media demand durable sealing connections.
In marine and petrochemical cracking service, the material withstands atmosphere, sea water, scrubber environments, and pitting or crevice corrosion.
For high temperature steam systems, aerospace hardware, إلكترونيات, النفط والغاز, and nuclear reactor related duty, these alloys combine elevated temperature strength, صلابة, والاستقرار الحراري.
Fast-Track Inconel Slip on Flanges from SASA FLANGE اليوم
يختار SASA FLANGE for Inconel Slip on Flanges when buyers need a balanced combination of corrosion resistance, temperature stability, قوة عالية, and toughness in one slip on pipe flange solution.
We support made-to-order supply with 15-30 days production and ISO 9001:2015 quality assurance.
For urgent fast delivery requirements covering common grades like 625 و 718, تواصل مع sales@sasaflange.com أو واتساب +86 13764965049 to discuss your application and sourcing schedule.
لماذا تختار SASA FLANGE?
فئات الضغط المتعددةPressure class data is not specified in source, while the product is presented for severe and elevated-temperature service applications. |
التفاوتات الأبعاد الدقيقةDimensional tolerance values are not specified in source, but slip on flange construction supports practical installation across industrial systems. |
مقاومة للتآكلHigh alloy content helps resist atmosphere, sea water, neutral salts, alkaline media, oxidizing chemicals, and nonoxidizing environments. |
ISO 9001 معتمدISO 15156-3 is referenced in the source for Inconel 625, supporting recognized material specification requirements. |
أسعار تنافسيةCommon grades such as Inconel 625 و إنكونيل 718 support broad industrial use across chemical, البحرية, وقطاعات الطاقة. |
الشحن العالميSuitable for international industries including aerospace, البحرية, إلكترونيات, المعالجة الكيميائية, والنفط & gas applications. |
slip on pipe flange Application Scenario
The slip on pipe flange is widely deployed across critical industrial sectors where reliable pipe sealing and pressure containment are essential. تتضمن سيناريوهات التطبيق النموذجية:
من أنابيب مصافي الضغط العالي إلى شبكات توزيع المياه البلدية, the slip on pipe flange ensures leak-free connections and long-term service reliability in demanding environments.
slip on pipe flange installed in industrial piping system
الأسئلة المتداولة
س: What is a slip on pipe flange used for?
أ: A slip on pipe flange is used to connect pipe, الصمامات, مضخات, and fittings where easy alignment and welding are required. The pipe slips through the bore, then fillet welds are applied inside and outside for strength. Inconel slip on flanges are selected for corrosive, ارتفاع درجة الحرارة, and cryogenic service, including oxidizing and chloride-containing environments, with alloy capability ranging from cryogenic duty up to 2200°F depending on grade.
س: What materials are available for slip on pipe flange?
أ: SASA FLANGE supplies slip on flanges in Inconel 600, 601, 625, 686, 718, 725, and X750. These nickel-chromium and nickel-chromium-molybdenum alloys cover strong corrosion, أكسدة, and high-temperature requirements. Common material designations include UNS N06600, N06601, and N06625, with EN grades 2.4816, 2.4851, و 2.4856. Material is produced to standards such as ASTM B166, B167, B168, B443, B446, and ASTM/ASME SB564.
س: What pressure ratings does a slip on pipe flange support?
أ: Pressure rating depends on flange dimensions, الصف المادي, درجة حرارة التشغيل, and the governing flange standard. For Inconel slip on flanges, SASA FLANGE manufactures to customer-specified pressure classes because the source data does not define a fixed class range. Temperature capability is grade-specific: سبيكة 600 to 2000°F, سبيكة 601 to 2200°F, سبيكة 625 oxidation resistance to 1800°F, and Alloy 718 to 1300°F.
س: What standards does a slip on pipe flange comply with?
أ: These slip on flanges are produced from Inconel materials compliant with major ASTM, ASME, مقياس الدعم الكلي, EN, DIN, ISO, and NACE requirements. Covered specifications include ASTM B166, B167, B168, B443, B446, B462, B564, B574; ASME SB166, SB167, SB168, SB443, SB446, SB564; مقياس الدعم الكلي 5540, 5665, 5666, 5837, 5596; EN 2.4816, 2.4851, 2.4856; ISO 15156-3; NACE MR0175-3. MTC is supplied per EN 10204 3.1.
س: What is the lead time for custom slip on pipe flange orders?
أ: Custom slip on flange orders typically require 15-30 أيام, depending on Inconel grade, مقاس, نطاق التصنيع, ومتطلبات التفتيش. Stock items are normally available in 3-7 أيام. SASA FLANGE has over 15 years of manufacturing experience and operates under ISO 9001:2015 quality control. Each shipment can include EN 10204 3.1 شهادات اختبار المواد. For urgent schedules, تواصل مع sales@sasaflange.com أو واتساب +86 13764965049.
التعبئة والتغليف والشحن
📦 التعبئة مهمة للغاية خاصة في حالة الشحنات الدولية التي تمر فيها الإرساليات عبر قنوات مختلفة للوصول إلى الوجهة النهائية, لذلك فإننا نولي اهتمامًا خاصًا بالتغليف لضمان وصول كل قطعة في حالة ممتازة.
SASA FLANGE يقوم بتعبئة البضائع بعدة طرق بناءً على نوع المنتج ومتطلبات العميل. تتضمن خيارات التغليف القياسية لدينا:
- حالات الخشب الرقائقي / الصناديق – للفلنجات الثقيلة والمنتجات ذات القطر الكبير
- المنصات مع غلاف يتقلص – للطلبات بالجملة والأحجام القياسية
- أكياس بولي فردية + صناديق كرتونية – للفلنجات الصغيرة والتجهيزات
- طلاء زيتي مضاد للصدأ + ورق مقاوم للماء - للشحن البحري لمسافات طويلة
- وضع العلامات ووضع العلامات المخصصة - حسب مواصفات العميل أو متطلبات المشروع
جميع العبوات تلبي معايير التصدير الدولية. تعليمات التعبئة الخاصة موضع ترحيب عند الطلب.
