Keterangan
Spesifikasi Produk dan Data Teknis
Paduan Ni-Cr yang dikenal karena ketahanan terhadap korosi dan stabilitas suhu tinggi
- ✓Ketahanan korosi yang baik pada suhu tinggi
- ✓Stabilitas mekanis suhu tinggi hingga 2200 °F (982°C)
- ✓Bahan berkekuatan tinggi dengan ketangguhan luar biasa pada suhu tinggi
- ✓Nilai Inconel: 600, 601, 625, 686, 718, 725, X750
- ✓Wawasan mendalam tentang Alloy 625 dan Paduan 718
- ✓Slip on flange features and benefits
- ✓Lembar data tersedia di Inconel 625 dan Inconel 718
Inconel® slip on flanges, seperti Inconel 600, 601, 625, 686, 718 & 725 slip on flanges, adalah keluarga paduan nikel-kromium-molibdenum yang digunakan karena kekuatannya yang tinggi pada suhu tinggi dan ketahanan korosi yang baik. Karena stabilitas termalnya yang tinggi, Inconel slip on flanges can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel slip on flanges enable it to withstand a wide variety of severe corrosive environments. Di lingkungan yang ringan, misalnya suasana, air laut, garam netral, dan media basa, there is almost no attack to Inconel slip on flanges. Dalam lingkungan korosif yang lebih parah, kombinasi nikel dan kromium memberikan ketahanan terhadap bahan kimia pengoksidasi, sedangkan kandungan nikel dan molibdenum yang tinggi memberikan ketahanan terhadap lingkungan non-oksidasi.
Because Inconel slip on flanges offer a good balance of corrosion resistance, stabilitas suhu, ketangguhan dan kekuatannya sering kali menjadi bahan pilihan untuk pemrosesan kimia, luar angkasa, laut, elektronik dan minyak & gas.
Nilai flensa paduan nikel Inconel yang paling umum adalah Inconel 625 dan Inconel 718. Dapatkan lebih banyak wawasan tentang dua nilai ini dengan mengakses Inconel kami 625 dan Inconel 718 ikhtisar atau dengan menghubungi pakar teknik kami.
Tersedia Jenis Flange: Flensa Buta, Flensa Sambungan Putaran, Selipkan Flensa, Flensa Las Soket, Flensa Berulir, Flensa Leher Las
Referensi Dimensi Flange
Inconel Slip on Flanges Built for Demanding slip on pipe flange Service
SASA FLANGE supplies Inconel Slip on Flanges as a family of Ni-Cr and nickel-chromium-molybdenum alloys valued for good corrosion resistance and high temperature mechanical stability.
These flanges perform from cryogenic service up to 2200°F (982°C), making each slip on pipe flange suitable for severe thermal duty.
Their high alloy content supports use in high temperature steam, power plant systems, and petrochemical cracking environments where toughness, kekuatan, and corrosion resistance must work together.
Inconel Slip on Flanges Grade Matrix and Standards Depth
SASA FLANGE offers Inconel Slip on Flanges in grades 600, 601, 625, 686, 718, 725, and X750.
Paduan 600 UNS N06600 resists carburization and oxidation through 2000°F; Paduan 601 UNS N06601 resists oxidation through 2200°F; Paduan 625 UNS N06625 is oxidation resistant to 1800°F and supports ISO 15156-3 Dan NACE MR0175-3; Paduan 718 UNS N07718 delivers creep-rupture strength to 1300°F.
Specifications cited include AMS, ASME, ASTM, EN, DIN, bahan, and UNS designations.
Inconel Slip on Flanges Across Heat, Kimia, and Power Frontiers
SASA FLANGE Inconel Slip on Flanges are selected for chemical processing where oxidizing chemicals, mereduksi asam, and severe corrosive media demand durable sealing connections.
In marine and petrochemical cracking service, the material withstands atmosphere, air laut, scrubber environments, and pitting or crevice corrosion.
Untuk sistem uap suhu tinggi, aerospace hardware, elektronik, minyak dan gas, and nuclear reactor related duty, these alloys combine elevated temperature strength, kekerasan, dan stabilitas termal.
Fast-Track Inconel Slip on Flanges from SASA FLANGE Today
Memilih SASA FLANGE for Inconel Slip on Flanges when buyers need a balanced combination of corrosion resistance, stabilitas suhu, kekuatan tinggi, and toughness in one slip on pipe flange solution.
We support made-to-order supply with 15-30 hari produksi dan ISO 9001:2015 jaminan kualitas.
For urgent fast delivery requirements covering common grades like 625 Dan 718, hubungi sales@sasaflange.com atau WhatsApp +86 13764965049 to discuss your application and sourcing schedule.
Mengapa Memilih SASA FLANGE?
Kelas Tekanan BergandaPressure class data is not specified in source, while the product is presented for severe and elevated-temperature service applications. |
Toleransi Dimensi yang TepatDimensional tolerance values are not specified in source, but slip on flange construction supports practical installation across industrial systems. |
Tahan KorosiHigh alloy content helps resist atmosphere, air laut, garam netral, alkaline media, oxidizing chemicals, and nonoxidizing environments. |
ISO 9001 BersertifikatISO 15156-3 is referenced in the source for Inconel 625, supporting recognized material specification requirements. |
Harga KompetitifCommon grades such as Inconel 625 dan Inconel 718 support broad industrial use across chemical, laut, dan sektor energi. |
Pengiriman GlobalSuitable for international industries including aerospace, laut, elektronik, pemrosesan kimia, dan minyak & aplikasi gas. |
slip on pipe flange Application Scenario
The slip on pipe flange is widely deployed across critical industrial sectors where reliable pipe sealing and pressure containment are essential. Skenario aplikasi yang umum meliputi:
Dari pipa kilang bertekanan tinggi hingga jaringan distribusi air kota, the slip on pipe flange ensures leak-free connections and long-term service reliability in demanding environments.
slip on pipe flange installed in industrial piping system
Pertanyaan yang Sering Diajukan
Q: What is a slip on pipe flange used for?
A: A slip on pipe flange is used to connect pipe, katup, pompa, and fittings where easy alignment and welding are required. The pipe slips through the bore, then fillet welds are applied inside and outside for strength. Inconel slip on flanges are selected for corrosive, suhu tinggi, and cryogenic service, including oxidizing and chloride-containing environments, with alloy capability ranging from cryogenic duty up to 2200°F depending on grade.
Q: What materials are available for slip on pipe flange?
A: SASA FLANGE supplies slip on flanges in Inconel 600, 601, 625, 686, 718, 725, and X750. These nickel-chromium and nickel-chromium-molybdenum alloys cover strong corrosion, oksidasi, and high-temperature requirements. Common material designations include UNS N06600, N06601, and N06625, with EN grades 2.4816, 2.4851, Dan 2.4856. Material is produced to standards such as ASTM B166, B167, B168, B443, B446, and ASTM/ASME SB564.
Q: What pressure ratings does a slip on pipe flange support?
A: Peringkat tekanan tergantung pada dimensi flensa, kelas materi, suhu operasi, and the governing flange standard. For Inconel slip on flanges, SASA FLANGE manufactures to customer-specified pressure classes because the source data does not define a fixed class range. Temperature capability is grade-specific: Paduan 600 to 2000°F, Paduan 601 to 2200°F, Paduan 625 oxidation resistance to 1800°F, dan Paduan 718 to 1300°F.
Q: What standards does a slip on pipe flange comply with?
A: These slip on flanges are produced from Inconel materials compliant with major ASTM, ASME, AMS, EN, DIN, ISO, and NACE requirements. Covered specifications include ASTM B166, B167, B168, B443, B446, B462, B564, B574; ASME SB166, SB167, SB168, SB443, SB446, SB564; AMS 5540, 5665, 5666, 5837, 5596; EN 2.4816, 2.4851, 2.4856; ISO 15156-3; NACE MR0175-3. MTC is supplied per EN 10204 3.1.
Q: What is the lead time for custom slip on pipe flange orders?
A: Custom slip on flange orders typically require 15-30 hari, depending on Inconel grade, ukuran, machining scope, dan persyaratan pemeriksaan. Stock items are normally available in 3-7 hari. SASA FLANGE has over 15 tahun pengalaman manufaktur dan beroperasi di bawah ISO 9001:2015 quality control. Each shipment can include EN 10204 3.1 sertifikat uji materi. For urgent schedules, hubungi sales@sasaflange.com atau WhatsApp +86 13764965049.
Pengemasan dan Pengiriman
📦 Pengepakan merupakan hal yang cukup penting terutama dalam kasus pengiriman internasional dimana kiriman melewati berbagai jalur untuk mencapai tujuan akhir, jadi kami menaruh perhatian khusus pada pengemasan untuk memastikan setiap barang tiba dalam kondisi sempurna.
SASA FLANGE mengemas barang dengan berbagai cara berdasarkan jenis produk dan kebutuhan pelanggan. Pilihan kemasan standar kami meliputi:
- Kasus kayu lapis / peti – untuk flensa berat dan produk berdiameter besar
- Palet dengan bungkus menyusut – untuk pesanan massal dan ukuran standar
- Polybag individu + kotak karton – untuk flensa dan fitting kecil
- Lapisan minyak anti karat + kertas tahan air – untuk angkutan laut jarak jauh
- Penandaan dan pelabelan khusus – sesuai spesifikasi pelanggan atau persyaratan proyek
Semua kemasan memenuhi standar ekspor internasional. Instruksi pengepakan khusus diterima berdasarkan permintaan.
