合金鋼フランジの輸出梱包

プロジェクトニュース発行済み: 3 8月 2026SASA FLANGE プロジェクトチーム

プロジェクトが完了しました

Export packaging was completed for alloy steel flanges covering F11, F22 and F91 grades, multiple flange types and pressure classes. The packing route combined dry surfaces, temporary rust prevention, rigid face covers, moisture control, separation and seaworthy crate bracing.

プロジェクトのスナップショット

プロジェクトのステータス	Export packing completed
材料	ASTM A182 F11, F22 and F91
フランジタイプ	WN, それで, BL, SW and THD
標準	ASME B16.5 そして ASME B16.47
圧力クラス	クラス 150 ～ 2500
サイズ範囲	NPS 1/2–24; large-diameter NPS 26–60 when ordered
検査	Final visual, 寸法, マーキング, quantity and packing verification
応用	製油所, power, petrochemical and oil and gas projects

配信のハイライト

Machined faces and RTJ grooves received rigid, non-abrasive protection.

VCI or barrier materials and desiccant were selected for the shipping route.

Blocking and bracing prevented heavy flanges from contacting each other.

Rust prevention before the crate is closed

Low-alloy steel can develop atmospheric rust when moisture, salt or condensation reaches bare machined surfaces. After final inspection, the flanges were cleaned and dried before an approved temporary rust preventive was applied to permitted areas. Gasket faces, RTJ grooves and weld ends received compatible protection that can be removed without damaging the surface.

Barrier wrap, VCI materials and desiccant were used according to the packing specification and expected transit conditions. Wet components were never sealed inside moisture-resistant wrapping.

Seaworthy protection for handling and ocean transport

Rigid covers protected raised faces and ring grooves. Individual flanges were separated, blocked and braced so their mass could not shift into adjacent components during truck, port or vessel handling. Crate members, lifting provisions and package markings were selected for the gross weight and destination requirements.

Before closure, quantities, markings and heat-number groupings were reconciled with the packing list. Receiving instructions identify the need for dry storage, periodic package inspection and preservation renewal when installation is delayed.

比較可能な RFQ に必要な情報

同等の調査により、正確な材料仕様とグレードが特定されるはずです, 管理規格とエディション, NPS, 圧力クラス, フランジタイプ, 直面している, ボアまたは一致するパイプスケジュール, 数量と送り先. このプロジェクトのニュース範囲について, 重要な参照点は次のとおりです ASTM A182 F11, F22 and F91, WN, それで, BL, SW and THD, クラス 150 ～ 2500 そして NPS 1/2–24; large-diameter NPS 26–60 when ordered.

必要事項を記載してください EN 10204 証明書の種類, 熱価トレーサビリティ, PMIの程度, 硬度限界, 寸法レポート, 臨死体験の方法と判定基準, 第三者の証人ポイント, 見積段階での梱包方法と納期希望. 早期の定義により製造が可能になる, 検査と書類のスケジュールを一緒にレビューする.

生産, 検査と梱包の写真

画像は関連するものを示しています SASA FLANGE 生産, このプロジェクトで使用された品質管理と出荷段階 - ニュースレポート.

Industrial components secured in export packaging — Wrapped and separated components ready for transport.

Finished components staged in the warehouse — Dry indoor staging before packing closure.

Machined alloy flange surfaces before protection — Finished flanges inspected before preservation.

よくある質問

Should alloy steel flange faces be painted?

Permanent paint should not be applied to sealing faces or RTJ grooves unless an approved removable system specifically allows it.

Is VCI alone enough for ocean shipment?

No single product is sufficient by itself. Dryness, barrier integrity, desiccant, duration, climate and crate design must be considered together.

What should be checked when the shipment arrives?

Check crate condition, moisture ingress, item count, markings, preservation and the condition of sealing faces and weld ends before storage.

合金鋼フランジの見積もりを依頼する

ASTM グレードを送信する, スタンダードとエディション, NPS, 圧力クラス, フランジタイプ, 直面している, ボアまたはパイプのスケジュール, 量, 配送先と必要なPMI, 臨死体験, 硬度, 第三者による検査と文書化.

見積依頼を送信するフランジ製品を見る