Embalaje de exportación para bridas de acero aleado

Noticias del proyectoPublicado: 3 Agosto 2026SASA FLANGE Equipo de proyecto

Proyecto completado

Export packaging was completed for alloy steel flanges covering F11, F22 and F91 grades, multiple flange types and pressure classes. The packing route combined dry surfaces, temporary rust prevention, rigid face covers, moisture control, separation and seaworthy crate bracing.

Instantánea del proyecto

Estado del proyecto	Export packing completed
Material	ASTM A182 F11, F22 and F91
Tipo de brida	W.N., ENTONCES, BL, SW and THD
Estándar	ASME B16.5 y ASME B16.47
Clase de presión	Class 150–2500
Rango de tallas	NPS 1/2–24; large-diameter NPS 26–60 when ordered
Inspección	Final visual, dimensiones, calificación, quantity and packing verification
Solicitud	Refinery, fuerza, petrochemical and oil and gas projects

Aspectos destacados de la entrega

Machined faces and RTJ grooves received rigid, non-abrasive protection.

VCI or barrier materials and desiccant were selected for the shipping route.

Blocking and bracing prevented heavy flanges from contacting each other.

Rust prevention before the crate is closed

Low-alloy steel can develop atmospheric rust when moisture, salt or condensation reaches bare machined surfaces. After final inspection, the flanges were cleaned and dried before an approved temporary rust preventive was applied to permitted areas. Gasket faces, RTJ grooves and weld ends received compatible protection that can be removed without damaging the surface.

Barrier wrap, VCI materials and desiccant were used according to the packing specification and expected transit conditions. Wet components were never sealed inside moisture-resistant wrapping.

Seaworthy protection for handling and ocean transport

Rigid covers protected raised faces and ring grooves. Individual flanges were separated, blocked and braced so their mass could not shift into adjacent components during truck, port or vessel handling. Crate members, lifting provisions and package markings were selected for the gross weight and destination requirements.

Before closure, quantities, markings and heat-number groupings were reconciled with the packing list. Receiving instructions identify the need for dry storage, periodic package inspection and preservation renewal when installation is delayed.

Información necesaria para una solicitud de cotización comparable

Una consulta comparable debe identificar la especificación y el grado exactos del material., estándar que rige y edición, NPS, clase de presión, tipo de brida, frente a, diámetro interior o tabla de tubería correspondiente, cantidad y destino. Para este proyecto-noticia alcance, Los puntos de referencia clave fueron ASTM A182 F11, F22 and F91, W.N., ENTONCES, BL, SW and THD, Class 150–2500 y NPS 1/2–24; large-diameter NPS 26–60 when ordered.

Indique lo requerido EN 10204 tipo de certificado, trazabilidad del número de calor, Extensión del PMI, límites de dureza, informe dimensional, Método NDE y estándar de aceptación., puntos de testigos de terceros, método de embalaje y fecha de entrega requerida en la etapa de cotización. La definición temprana permite la fabricación, Los cronogramas de inspección y documentación se revisarán juntos..

Producción, fotos de inspección y embalaje

Las imágenes muestran lo relevante SASA FLANGE producción, etapas de control de calidad y envío utilizadas para este informe de noticias del proyecto.

Industrial components secured in export packaging — Wrapped and separated components ready for transport.

Finished components staged in the warehouse — Dry indoor staging before packing closure.

Machined alloy flange surfaces before protection — Finished flanges inspected before preservation.

Preguntas frecuentes

Should alloy steel flange faces be painted?

Permanent paint should not be applied to sealing faces or RTJ grooves unless an approved removable system specifically allows it.

Is VCI alone enough for ocean shipment?

No single product is sufficient by itself. Dryness, barrier integrity, desiccant, duration, climate and crate design must be considered together.

What should be checked when the shipment arrives?

Check crate condition, moisture ingress, item count, markings, preservation and the condition of sealing faces and weld ends before storage.

Solicite cotización para bridas de acero aleado

Enviar el grado ASTM, estándar y edición, NPS, clase de presión, tipo de brida, frente a, tabla de diámetros o tuberías, cantidad, destino de entrega y PMI requerido, ECM, dureza, inspección y documentación de terceros.

Envíe su solicitud de cotización Ver productos de bridas