腐食用途向けタンタル重ね継手フランジ

タンタルラップジョイントフランジは、非常に攻撃的なプロセスシステムのスタブエンドで使用される耐食性バッキングフランジです。. SASA FLANGE は、ASTM B521 R05200 などのグレードのタンタルおよびタンタル被覆重ね継手フランジ ソリューションを提供しています, 化学処理用 R05400 および R05252, 製薬, パワーおよび高純度アプリケーション. 製品は ASME で入手可能です, EN, DIN, JISおよびGB規格とEN 10204 3.1 証明書, PMI テストと完全な熱数トレーサビリティ.

  • ✓学年: ASTM B521 R05200, R05400, R05252; タンタル被覆炭素鋼およびタンタル被覆ステンレス鋼 (ご要望に応じて)
  • ✓表面: 機械加工仕上げ, 漬けてきれいにした, 該当する場合、不動態化されたバッキングフランジ, 炭素鋼の裏当て部分に保護油を塗る
  • ✓仕様: DN15~DN600 (1/2 インチから 24 インチ), クラス 150 に 600, PN10~PN63

説明

製品詳細

タンタルラップジョイントフランジは、対応するスタブ端上で回転するように設計されたルーズタイプのフランジです。, 設置やメンテナンス時の位置合わせが容易になります. They are selected for extremely corrosive media including hot sulfuric acid, hydrochloric acid in controlled conditions, 硝酸, bromine-bearing media and high-purity chemical service. Compared with integral flanges, lap joint designs reduce replacement cost when expensive corrosion-resistant materials such as tantalum are required only on the wetted side.

SASA FLANGE supplies tantalum lap joint flanges and tantalum-clad constructions in customized dimensions and drilling patterns to suit ASME B16.5, EN 1092-1, DIN, JIS and GB systems. 各注文は化学分析でサポート可能, 機械的試験, 寸法検査, PMIテスト, EN 10204 3.1 certificate and full heat number traceability to meet demanding international project requirements.

  • ✓製品名: Tantalum Lap Joint Flanges
  • ✓材質グレード: ASTM B521 R05200, R05400, R05252
  • ✓製品タイプ: ラップジョイントフランジ / スタブエンドアセンブリ用のバッキングフランジ
  • ✓主な特長: Exceptional corrosion resistance with flexible flange alignment and lower total cost in lined or clad systems
  • ✓アプリケーション: アシッドサービス, fine chemicals, 医薬品, chlor-alkali, high-purity processing, power and specialty equipment

製品パラメータ

製品名 Tantalum Lap Joint Flanges
材質グレード ASTM B521 R05200, R05400, R05252; tantalum-clad CS/SS options
材質の種類 Pure tantalum forged/machined flange or tantalum-clad backing flange assembly
製品形態 Lap Joint Flange used with Ta stub end or lined pipe stub end
サイズ範囲 DN15 – DN600 (1/2 インチ – 24 インチ)
圧力クラス クラス 150 – 600 / PN10 – PN63
シール面 平面, Raised Face on backing flange as applicable to stub end design; custom facing available
表面処理 Precision machined, 脱脂した, 掃除された, pickled where applicable, protected for export shipment
標準 ASME B16.5, EN 1092-1, DIN 2527, JIS B2220, ギガバイト/トン 9119 または顧客の仕様
検査 化学分析, 機械的試験, PMIテスト, 次元, 静水圧
証明書 EN 10204 3.1 材料証明書が利用可能
加工サービス 切断, CNC加工, カスタムドリリング, カスタムサイズ加工

化学組成

The chemical composition below is for reference for wrought tantalum grades commonly used for flange and stub end applications. Final chemistry depends on the selected ASTM grade, product form and purchase specification. Certified values are provided in the mill test certificate and verified against applicable standards and project requirements before shipment.

要素 C そして ん P S Cr で モー 他の
ASTM B521 R05200 0.01 最大 0.01 最大 0.01 最大 0.005 最大 0.005 最大 0.01 最大 0.01 最大 0.02 最大 Ta 99.9% 分

機械的性質

Mechanical properties of tantalum lap joint flanges vary with grade, cold work level, annealed condition, section thickness and manufacturing method. The values below are typical reference data for wrought tantalum materials used in flange production. Final tested results are confirmed by actual material certification and any supplementary project testing requirements.

学年 抗張力 降伏強さ 伸長 硬度 密度
R05200 Annealed 207 MPa 138 MPa 25% 分 90 HB 16.6 g/cm3
R05400 Annealed 220 MPa 145 MPa 20% 分 95 HB 16.6 g/cm3

共通サイズ表

サイズ範囲 圧力クラス シール面 材料 可用性
DN15 – DN50 クラス 150 – 600 FF / RF R05200 / R05400 ストック / 生産
DN65 – DN300 クラス 150 – 600 FF / RF R05200 / R05400 / clad type 生産
DN350 – DN600 クラス 150 – 300 FF / RF R05200 / clad type 生産
DN15 – DN600 PN10 – PN63 Type to standard R05200 / R05400 / clad type オーダーメイド

各種仕様比較

タイプ 説明 一般的な使用方法
Solid Tantalum Lap Joint Flange Machined from wrought tantalum material for maximum corrosion resistance across wetted surfaces High-purity chemical lines, small to medium bore premium service
Tantalum-Clad Lap Joint Flange Carbon steel or stainless backing flange with tantalum corrosion-resistant layer or contact surface Cost-sensitive corrosive service with required tantalum exposure only
ASME 重ね継手フランジ Dimensions and drilling to ASME B16.5 for use with ASME stub ends and piping systems 石油とガス, chemical and export projects using inch series piping
EN/DIN/JIS/GB Lap Joint Flange メートル法のフランジの穴あけと地域の規格またはプロジェクトの図面に従って製造された寸法 ヨーロッパ人, 日本語, 中国および混合規格の工業プラント

同等の規格と国際名

タンタルラップジョイントフランジは、配管システムに必要な寸法フランジ規格に従って製造されています, 一方、タンタル材料グレードは、次のような認識された材料仕様に従います。 ASTM B521 または顧客が承認した同等品. 地域の規格は主に寸法に影響します, 穴あけと圧力定格; 物質的同等性はMTCを通じて確認されています, PMI とプロジェクトのドキュメント.

標準 / 地域 標準コード 代表的なグレード / 同等
アメリカ合衆国 ASME B16.5 ASTM B521 R05200 / R05400 タンタル
ヨーロッパ EN 1092-1 重ね継手フランジとプロジェクト材料の仕様
ドイツ DIN 2527 / 2566 図面に従ってタンタルまたはタンタル被覆構造
日本 JIS B2220 JIS 穴あけ加工付きタンタルフランジと寸法
中国 ギガバイト/トン 9119 タンタル重ね継手フランジの GB 寸法

生産工程の流れ

SASA FLANGE controls the full production route from certified tantalum raw material selection to final machining and inspection. Process discipline is especially important for reactive, high-value materials to ensure dimensional accuracy, 表面の完全性, traceability and reliable corrosion performance in severe service.

  • 1. 原材料の選択
  • 2. 鍛造 / 切断
  • 3. 熱処理
  • 4. 荒加工
  • 5. 仕上げ加工
  • 6. 掘削
  • 7. 表面処理
  • 8. 検査
  • 9. マーキング
  • 10. パッキング
  • 11. 配達
プロセスステップ 説明 品質管理ポイント
原材料 認定されたタンタルビレットを選択してください, 鍛造品, plates or clad blanks 材料証明書とトレーサビリティ
鍛造 Hot forming or controlled cutting to achieve required flange blank shape Forming temperature and reduction ratio
熱処理 Stress relief or annealing where required by grade and fabrication route 温度と保持時間の制御
機械加工 シール面, ボア, ハブプロファイル, ボルト穴と寸法 寸法精度と表面仕上げ
検査 出荷前の最終検査 寸法, 表面, PMI, 静水圧

製品検査

1. 化学成分検査

Chemical composition inspection verifies the tantalum grade and impurity limits required for corrosive service. 原材料証明書が審査され、, 指定された場所, laboratory analysis is performed to confirm compliance with ASTM or customer requirements. This control is critical because small variations in interstitials and metallic impurities can affect corrosion resistance and fabrication performance.

2. 機械的特性試験

Mechanical properties testing confirms tensile strength, 降伏強さ, elongation and hardness of the tantalum material used for flange production. Test results are checked against the relevant grade and supply condition, such as annealed or stress-relieved. This helps ensure the flange can withstand assembly loads, thermal cycling and service stresses without cracking or excessive deformation.

3. 寸法検査

外径をカバーする寸法検査, 厚さ, ボア, ボルトサークル, ボルト穴のサイズ, flange flatness and sealing face finish. 重ね継手フランジ用, special attention is paid to fit-up with the matching stub end and free rotation during installation. Standard-specific tolerances are verified to ASME, EN, DIN, JIS, GB or approved project drawings before release.

4. PMI試験と静水圧試験

PMI testing is carried out to confirm the supplied material matches the specified tantalum grade or clad construction. When supplied as part of an assembled piping component, hydrostatic testing can be performed according to project requirements to verify pressure integrity. EN 10204 3.1 証明書, inspection reports and full heat number traceability are provided for documented quality assurance.

製品の梱包

  • ✓木製ケース包装: 高圧・大口径製品に最適
  • ✓シュリンクラップによるパレット梱包: バッチ出荷や標準サイズに適しています
  • ✓防錆油塗装 + 耐水紙: 海上貨物の保護に使用されます
  • ✓個別のビニール袋 + カートン: 小型継手やねじ製品に使用されます。
  • ✓クリアマーキング: 学年, サイズ, 圧力クラス, ヒート番号とPO番号

アプリケーション

Tantalum lap joint flanges are used where exceptional corrosion resistance and flexible maintenance are required. They are especially suitable for systems handling strong acids, halogen-bearing fluids and high-purity media, where the wetted corrosion-resistant component is combined with an economical backing flange design for easier alignment and reduced lifecycle cost.

業界 代表的な用途 この製品が使用される理由
石油とガス Specialty chemical injection skids, 酸処理ユニットおよび海洋腐食クリティカルパッケージシステム 腐食性の化学物質に対する高い耐性を提供しながら、メンテナンス時のフランジ位置合わせを容易にします。
化学処理 硫酸サービス, 硝酸系, 臭素関連メディア, 反応器と移送ライン タンタルは多くの厳しい化学環境において優れた耐食性を発揮します
発電 FGD副産物の処理, 特殊な投与ラインおよび実験室またはパイロットプロセス回路 プロセス化学物質の腐食性が高く、機器の信頼性が不可欠な場合に使用されます。
水処理 高純度分注システム, 膜化学洗浄スキッドおよび特殊酸化ライン 強力な化学洗浄や処理媒体でのクリーンなサービスと耐久性をサポート
海洋および海洋 コンパクトな腐食プロセスモジュール, 分析システムと特殊な海洋化学ユニット Lap joint construction simplifies installation in confined spaces and reduces replacement cost

選ぶ理由 SASA FLANGE?

  • ✓世界的な産業プロジェクト向けのラップジョイントフランジの専門メーカー
  • ✓カスタマイズされたサイズ, 図面による圧力クラスと材料グレード
  • ✓完全な標準サポート: ASME, EN, DIN, JIS, GB, GOSTと顧客の仕様
  • ✓熱数制御による材料トレーサビリティと EN 10204 3.1 材料証明書
  • ✓化学分析, 機械的試験, PMIテスト, 静圧検査および寸法検査
  • ✓標準品の在庫状況, リードタイム 3-7 日; カスタム生産 15-30 日
  • ✓海上向け輸出グレードの梱包, 航空輸送と陸上輸送
  • ✓15+ 長年の供給経験 50+ 世界中の国

よくある質問

Q: What is a tantalum lap joint flange?

あ: A tantalum lap joint flange is a rotating backing flange used together with a stub end, where the wetted corrosion-resistant component is typically tantalum or tantalum-lined. The design allows easier bolt hole alignment and lower replacement cost compared with solid integral flanges, making it suitable for highly corrosive chemical and high-purity process systems.

Q: What materials are available for tantalum lap joint flanges?

あ: SASA FLANGE can supply solid tantalum grades such as ASTM B521 R05200, R05400 and R05252, アプリケーション要件に応じて. For more economical solutions, tantalum-clad carbon steel or tantalum-clad stainless steel constructions are also available. 材料の選択はプロセス化学に依存します, 動作温度, 必要な圧力クラスとタンタル暴露の程度.

Q: サポートされている圧力クラス?

あ: タンタル重ね継手フランジの通常の供給範囲は ASME クラスです 150, 300 そして 600, サイズと設計基準に応じてメートル法 PN10 から PN63 まで. タンタルは通常、特殊な腐食サービスで使用されるため, 最終的な圧力定格は、バッキングフランジの構造にも依存する場合があります, 温度と関連するスタブ端の設計.

Q: できる SASA FLANGE カスタムサイズを供給する?

あ: はい. SASA FLANGE カスタム寸法を提供します, 穴あけパターン, ボアサイズ, タンタルラップジョイントフランジアセンブリのフェーシングの詳細と特別な嵌合配置. ASMEに合わせて製造可能です, EN, DIN, JIS, GBまたは顧客の図面, 特別なスタブエンドの取り付けを含む, プロセス機器メーカーおよび EPC プロジェクト向けの混合標準掘削およびカスタマイズされたクラッドまたは固体タンタル ソリューション.

Q: どのような証明書が提供されるか?

あ: 標準ドキュメントには以下が含まれます EN 10204 3.1 熱番号トレーサビリティ付きの材料証明書. 注文範囲に応じて, SASA FLANGE 化学分析レポートも提供できます, 機械的テストの結果, PMI検査記録, 組み立てられたコンポーネントの寸法検査レポートと水圧試験記録. このドキュメントは、世界中のバイヤーがプロジェクトの QA/QC およびエンドユーザーの承認要件を満たすのに役立ちます。.

お問い合わせ

タンタル重ね継手フランジまたは関連するカスタム フランジ製品をお探しの場合, 連絡してください SASA FLANGE 必要なサイズで, 圧力クラス, 材質グレード, 標準, 表面処理, 数量と検査要件. 私たちのチームは専門的な技術ソリューションと競争力のある見積もりを提供します。 24 時間.

  • 📧メール: sales@sasaflange.com
  • 📱WhatsApp: +86 13764965049
  • ☎️電話番号: +86 21 52236361
  • 🌐 ウェブサイト: www.sasaflange.com

メッセージを残してください

    サイズを送信してください, 材料, 規格と数量. 以内にご返信させていただきます 24 時間.

    画像をアップロードする / 描画 (オプション)

    承認されました: JPG, PNG, WebP または PDF. 最大ファイルサイズ: 5 MB.