Описание
Детали продукта
Tantalum lap joint flanges are loose-type flanges designed to rotate over a matching stub end, making alignment easier during installation and maintenance. They are selected for extremely corrosive media including hot sulfuric acid, hydrochloric acid in controlled conditions, азотная кислота, bromine-bearing media and high-purity chemical service. По сравнению с цельными фланцами, lap joint designs reduce replacement cost when expensive corrosion-resistant materials such as tantalum are required only on the wetted side.
SASA FLANGE supplies tantalum lap joint flanges and tantalum-clad constructions in customized dimensions and drilling patterns to suit ASME B16.5, EN 1092-1, DIN, Системы JIS и GB. Каждый заказ может быть подкреплен химическим анализом., механические испытания, проверка размеров, Тестирование PMI, EN 10204 3.1 certificate and full heat number traceability to meet demanding international project requirements.
- ✓Название продукта: Tantalum Lap Joint Flanges
- ✓Марка материала: ASTM B521 R05200, Р05400, R05252
- ✓Тип продукта: Коленные соединения фланца / Backing Flange for Stub End Assembly
- ✓Основная особенность: Exceptional corrosion resistance with flexible flange alignment and lower total cost in lined or clad systems
- ✓Приложения: Acid service, тонкие химикаты, фармацевтика, chlor-alkali, high-purity processing, power and specialty equipment
Параметры продукта
| Название продукта | Tantalum Lap Joint Flanges |
| Марка материала | ASTM B521 R05200, Р05400, R05252; tantalum-clad CS/SS options |
| Тип материала | Pure tantalum forged/machined flange or tantalum-clad backing flange assembly |
| Форма продукта | Lap Joint Flange used with Ta stub end or lined pipe stub end |
| Диапазон размеров | Ду15 — Ду600 (1/2 дюйм — 24 дюйм) |
| Класс давления | Сорт 150 — 600 / PN10 — PN63 |
| Уплотняющая поверхность | Плоское Лицо, Raised Face on backing flange as applicable to stub end design; custom facing available |
| Обработка поверхности | Precision machined, обезжиренный, очищенный, pickled where applicable, protected for export shipment |
| Стандартный | ASME B16.5, EN 1092-1, DIN 2527, JIS B2220, ГБ/Т 9119 или спецификация клиента |
| Инспекция | Химический анализ, Механические испытания, Тест PMI, Размерный, Гидростатический |
| Сертификат | EN 10204 3.1 Имеется сертификат на материал |
| Служба обработки | Резка, обработка с ЧПУ, Индивидуальное бурение, Обработка нестандартного размера |
Химический состав
The chemical composition below is for reference for wrought tantalum grades commonly used for flange and stub end applications. Final chemistry depends on the selected ASTM grade, product form and purchase specification. Certified values are provided in the mill test certificate and verified against applicable standards and project requirements before shipment.
| Элемент | С | И | Мин. | П | С | Кр | В | Мо | Другой |
|---|---|---|---|---|---|---|---|---|---|
| ASTM B521 R05200 | 0.01 Макс | 0.01 Макс | 0.01 Макс | 0.005 Макс | 0.005 Макс | 0.01 Макс | 0.01 Макс | 0.02 Макс | Ta 99.9% мин |
Механические свойства
Mechanical properties of tantalum lap joint flanges vary with grade, cold work level, annealed condition, section thickness and manufacturing method. The values below are typical reference data for wrought tantalum materials used in flange production. Final tested results are confirmed by actual material certification and any supplementary project testing requirements.
| Оценка | Предел прочности | Предел текучести | Удлинение | Твердость | Плотность |
|---|---|---|---|---|---|
| R05200 Annealed | 207 МПа | 138 МПа | 25% мин | 90 полупансион | 16.6 г/см3 |
| R05400 Annealed | 220 МПа | 145 МПа | 20% мин | 95 полупансион | 16.6 г/см3 |
Таблица общих размеров
| Диапазон размеров | Класс давления | Уплотняющая поверхность | Материал | Доступность |
|---|---|---|---|---|
| Ду15 — Ду50 | Сорт 150 — 600 | ФФ / РФ | R05200 / Р05400 | Запас / Производство |
| Ду65 — Ду300 | Сорт 150 — 600 | ФФ / РФ | R05200 / Р05400 / clad type | Производство |
| Ду350 — Ду600 | Сорт 150 — 300 | ФФ / РФ | R05200 / clad type | Производство |
| Ду15 — Ду600 | PN10 — PN63 | Type to standard | R05200 / Р05400 / clad type | На заказ |
Сравнение различных характеристик
| Тип | Описание | Типичное использование |
|---|---|---|
| Solid Tantalum Lap Joint Flange | Machined from wrought tantalum material for maximum corrosion resistance across wetted surfaces | High-purity chemical lines, small to medium bore premium service |
| Tantalum-Clad Lap Joint Flange | Carbon steel or stainless backing flange with tantalum corrosion-resistant layer or contact surface | Cost-sensitive corrosive service with required tantalum exposure only |
| ASME Фланец внахлестку | Dimensions and drilling to ASME B16.5 for use with ASME stub ends and piping systems | Нефть и газ, chemical and export projects using inch series piping |
| EN/DIN/JIS/GB Lap Joint Flange | Metric flange drilling and dimensions manufactured to regional standards or project drawings | Европейский, японский, Chinese and mixed-standard industrial plants |
Эквивалентные стандарты и международные названия
Tantalum lap joint flanges are manufactured according to the dimensional flange standard required by the piping system, while the tantalum material grade follows recognized material specifications such as ASTM B521 or customer-approved equivalents. Regional standards mainly affect dimensions, drilling and pressure rating; material equivalence is confirmed through MTC, PMI and project documentation.
| Стандартный / Область | Стандартный код | Типичная оценка / Эквивалент |
|---|---|---|
| США | ASME B16.5 | ASTM B521 R05200 / R05400 tantalum |
| Европа | EN 1092-1 | Ta lap joint flange to project material specification |
| Германия | DIN 2527 / 2566 | Tantalum or tantalum-clad construction per drawing |
| Япония | JIS B2220 | Tantalum flange with JIS drilling and dimensions |
| Китай | ГБ/Т 9119 | Tantalum lap joint flange to GB dimensions |
Схема производственного процесса
SASA FLANGE controls the full production route from certified tantalum raw material selection to final machining and inspection. Process discipline is especially important for reactive, high-value materials to ensure dimensional accuracy, surface integrity, traceability and reliable corrosion performance in severe service.
- 1. Выбор сырья
- 2. Ковка / Резка
- 3. Термическая обработка
- 4. Грубая обработка
- 5. Завершить обработку
- 6. Бурение
- 7. Обработка поверхности
- 8. Инспекция
- 9. Маркировка
- 10. Упаковка
- 11. Доставка
| Этап процесса | Описание | Пункт контроля качества |
|---|---|---|
| Сырье | Выбирайте сертифицированные танталовые заготовки, поковки, plates or clad blanks | Сертификат материала и отслеживаемость |
| Ковка | Hot forming or controlled cutting to achieve required flange blank shape | Forming temperature and reduction ratio |
| Термическая обработка | Stress relief or annealing where required by grade and fabrication route | Контроль температуры и времени выдержки |
| Обработка | Уплотняющая поверхность, бурить, профиль концентратора, отверстия под болты и размеры | Точность размеров и чистота поверхности |
| Инспекция | Окончательная проверка перед отправкой | Измерение, поверхность, PMI, гидростатический |
Проверка продукта
1. Проверка химического состава
Chemical composition inspection verifies the tantalum grade and impurity limits required for corrosive service. Сертификаты на сырье проверяются и, где указано, laboratory analysis is performed to confirm compliance with ASTM or customer requirements. This control is critical because small variations in interstitials and metallic impurities can affect corrosion resistance and fabrication performance.
2. Испытание механических свойств
Mechanical properties testing confirms tensile strength, предел текучести, elongation and hardness of the tantalum material used for flange production. Test results are checked against the relevant grade and supply condition, such as annealed or stress-relieved. This helps ensure the flange can withstand assembly loads, thermal cycling and service stresses without cracking or excessive deformation.
3. Проверка размеров
Проверка размеров охватывает наружный диаметр, толщина, бурить, болт круг, размер отверстия для болта, flange flatness and sealing face finish. Для фланцев внахлестку, special attention is paid to fit-up with the matching stub end and free rotation during installation. Standard-specific tolerances are verified to ASME, EN, DIN, JIS, GB or approved project drawings before release.
4. PMI-тестирование и гидростатические испытания
PMI testing is carried out to confirm the supplied material matches the specified tantalum grade or clad construction. When supplied as part of an assembled piping component, hydrostatic testing can be performed according to project requirements to verify pressure integrity. EN 10204 3.1 сертификат, inspection reports and full heat number traceability are provided for documented quality assurance.
Упаковка продукта
- ✓Упаковка из деревянного ящика: Подходит для продуктов высокого давления и большого диаметра.
- ✓Упаковка поддонов в термоусадочную пленку: Подходит для партийных поставок и стандартных размеров.
- ✓Антикоррозионное масляное покрытие + Водонепроницаемая бумага: Используется для защиты морских грузов.
- ✓Индивидуальный полиэтиленовый пакет + Картонная коробка: Используется для небольших фитингов и резьбовых изделий.
- ✓Четкая маркировка: Оценка, размер, класс давления, номер плавки и номер заказа
Приложения
Tantalum lap joint flanges are used where exceptional corrosion resistance and flexible maintenance are required. They are especially suitable for systems handling strong acids, halogen-bearing fluids and high-purity media, where the wetted corrosion-resistant component is combined with an economical backing flange design for easier alignment and reduced lifecycle cost.
| Промышленность | Типичные применения | Почему используется этот продукт |
|---|---|---|
| Нефть и газ | Specialty chemical injection skids, acid handling units and offshore corrosion-critical package systems | Provides high resistance to aggressive chemicals while allowing easier flange alignment during maintenance |
| Химическая обработка | Sulfuric acid service, nitric acid systems, bromine-related media, reactors and transfer lines | Tantalum offers outstanding corrosion resistance in many severe chemical environments |
| Производство электроэнергии | FGD byproduct processing, specialty dosing lines and laboratory or pilot process circuits | Used where process chemistry is highly corrosive and equipment reliability is essential |
| Очистка воды | High-purity dosing systems, membrane chemical cleaning skids and specialty oxidation lines | Supports clean service and durability in aggressive chemical cleaning or treatment media |
| Морской и оффшорный | Compact corrosive process modules, analyzer systems and specialty offshore chemical units | Lap joint construction simplifies installation in confined spaces and reduces replacement cost |
Почему выбирают SASA FLANGE?
- ✓Профессиональный производитель фланцев внахлестку для глобальных промышленных проектов.
- ✓Индивидуальный размер, класс давления и марка материала согласно чертежам
- ✓Полная стандартная поддержка: ASME, EN, DIN, JIS, ГБ, ГОСТ и спецификации заказчика
- ✓Отслеживание материалов с контролем номера плавки и EN 10204 3.1 сертификат материала
- ✓Химический анализ, механические испытания, Тестирование PMI, гидростатический и размерный контроль
- ✓Наличие на складе стандартных позиций, Время выполнения 3-7 дни; изготовление на заказ 15-30 дни
- ✓Экспортная упаковка для моря., воздушный и наземный транспорт
- ✓15+ многолетний опыт поставок 50+ страны мира
Часто задаваемые вопросы
вопрос: What is a tantalum lap joint flange?
А: A tantalum lap joint flange is a rotating backing flange used together with a stub end, where the wetted corrosion-resistant component is typically tantalum or tantalum-lined. The design allows easier bolt hole alignment and lower replacement cost compared with solid integral flanges, making it suitable for highly corrosive chemical and high-purity process systems.
вопрос: What materials are available for tantalum lap joint flanges?
А: SASA FLANGE can supply solid tantalum grades such as ASTM B521 R05200, R05400 and R05252, в зависимости от требований приложения. For more economical solutions, tantalum-clad carbon steel or tantalum-clad stainless steel constructions are also available. Выбор материала зависит от химического процесса., рабочая температура, pressure class and the extent of tantalum exposure required.
вопрос: Какой класс давления поддерживается?
А: Typical supply range for tantalum lap joint flanges is ASME Class 150, 300 и 600, as well as metric PN10 to PN63 depending on size and design standard. Because tantalum is usually used in specialized corrosive service, the final pressure rating may also depend on backing flange construction, temperature and the associated stub end design.
вопрос: Может SASA FLANGE поставляем нестандартные размеры?
А: Да. SASA FLANGE supplies custom dimensions, схемы сверления, bore sizes, facing details and special mating arrangements for tantalum lap joint flange assemblies. We can manufacture to ASME, EN, DIN, JIS, ГБ или чертежи заказчика, including special stub end fit-up, mixed-standard drilling and tailored clad or solid tantalum solutions for process equipment manufacturers and EPC projects.
вопрос: Какой сертификат предоставляется?
А: Стандартная документация включает в себя EN 10204 3.1 сертификат на материал с возможностью отслеживания номера плавки. Depending on order scope, SASA FLANGE can also provide chemical analysis reports, результаты механических испытаний, PMI inspection records, dimensional inspection reports and hydrostatic test records for assembled components. This documentation helps global buyers meet project QA/QC and end-user approval requirements.
Связаться с нами
If you are looking for tantalum lap joint flanges or related custom flange products, пожалуйста, свяжитесь SASA FLANGE с вашим необходимым размером, класс давления, сорт материала, стандартный, обработка поверхности, требования к количеству и проверке. Наша команда предоставит профессиональные технические решения и конкурентоспособные предложения в течение 24 часы.
- 📧 Электронная почта: sales@sasaflange.com
- 📱Ватсап: +86 13764965049
- ☎️Тел.: +86 21 52236361
- 🌐 Сайт: www.sasaflange.com











