Description
ASTM A182 F91 Weld Neck Flange
Grade 91 weld neck flanges for modern high-temperature power and process piping requiring disciplined heat treatment, welding, PWHT, hardness and material control.
Quick engineering answer
An ASTM A182 F91 weld neck flange is a forged modified 9Cr-1Mo pressure component developed for elevated-temperature strength. Its performance depends on the correct normalized-and-tempered condition and controlled fabrication history.
Product specifications
| Material | ASTM A182 F91 creep-strength-enhanced ferritic alloy steel |
|---|---|
| Available forms | Raised Face (WNRF), Ring Type Joint (WNRTJ), Flat Face where permitted, Drawing-specific weld neck designs |
| Dimensional standards | ASME B16.5; ASME B16.47 for applicable large diameters; EN 1092-1 or drawing-defined designs on request |
| Nominal size | NPS 1/2 through NPS 24 under ASME B16.5; applicable larger sizes under ASME B16.47 or approved drawings |
| Pressure classes | Class 150, 300, 400, 600, 900, 1500 and 2500 within the selected standard, material group and size limits |
| Facing options | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) where permitted, or drawing-specific facing |
| Bore and weld end | Machined for the ordered pipe outside diameter, wall schedule and approved weld preparation |
| Documentation | EN 10204 3.1 MTC, heat-number traceability, dimensional report and ordered inspection records |
Pressure-temperature ratings and permitted combinations depend on the governing design code, material group, flange standard edition, size and class. Confirm the complete project specification before ordering.
Material selection
F91 is not interchangeable with F9 even though both are 9Cr material families. F91 relies on controlled vanadium, niobium and nitrogen additions plus strict heat treatment. Welding, preheat, interpass temperature, PWHT and hardness acceptance must follow the approved Grade 91 procedure.
Matching material note: Typically coordinated with ASTM A335 P91 pipe and ASTM A234 WP91 fittings. P91 is a pipe grade; the corresponding forged flange designation is ASTM A182 F91.
Quality controls available
- Traceable normalizing and tempering records
- Hardness mapping to project requirements
- PMI plus alloy segregation controls
- UT/MT and third-party surveillance when specified
Typical applications
Applications are selection cues, not blanket approvals. Process media, pressure, temperature, corrosion data, fatigue, code requirements and the complete piping specification govern final suitability.
Standards and procurement hierarchy
Information required for a quotation
Provide material grade and class, flange type, standard and edition, NPS/DN, pressure class or PN rating, pipe schedule or exact bore, facing and finish, quantity, delivery destination, heat treatment, NDE, testing, certification and third-party inspection requirements.
Frequently asked questions
What is ASTM A182 F91 Weld Neck Flange?
An ASTM A182 F91 weld neck flange is a forged modified 9Cr-1Mo pressure component developed for elevated-temperature strength. Its performance depends on the correct normalized-and-tempered condition and controlled fabrication history.
How should this flange material be specified?
State the complete material designation, flange type, dimensional standard and edition, NPS or DN, pressure class, facing, bore or pipe schedule, quantity, heat treatment, testing, certification and inspection requirements. A grade name by itself is not a complete purchase description.
Which flange types can be supplied?
Supply can include weld neck, blind, slip-on, socket-weld, threaded, lap-joint, long weld neck, orifice and drawing-specific flanges where the material, size, pressure class and governing standard permit the selected form.
Which ASME standards apply?
ASME B16.5 covers common NPS 1/2 through NPS 24 pipe flanges within its type, size and class limits. ASME B16.47 covers applicable NPS 26 through NPS 60 large-diameter steel flanges. The material specification, dimensional standard and design code perform different roles and must all be stated.
What documents are available with the order?
Typical documentation includes an EN 10204 3.1 material certificate, heat-number traceability and a dimensional report. PMI, hardness, ferrite, corrosion testing, UT, MT, PT or third-party inspection can be included when applicable and specified before manufacture.
Request a specification review and quotation
Send the complete RFQ or piping material specification. SASA FLANGE will review the grade, flange form, dimensions, bore, facing, inspection and documentation before production.
Related engineering resources
How to Match P91 Pipe with F91 Flanges Alloy Steel Material Center








