Description
Traceable alloy butt-weld fitting
ASTM B366 Inconel 625 90 Degree Long Radius Elbow
A procurement-ready 90-degree long-radius butt-weld elbow in ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy, supplied for corrosive chemical, offshore, marine and high-integrity process service with project-defined dimensions, wall, construction and inspection.
What is a Inconel 625 90 degree long radius elbow?
A 90-degree long-radius elbow redirects a pipeline through a smooth 1.5D nominal centerline radius. It is widely used where layout space permits a longer sweep than a short-radius elbow.
Inconel 625 is the widely searched trade-name description for UNS N06625. Its nickel-chromium-molybdenum-niobium composition is considered for chloride-bearing, marine and corrosive process environments, but the specific medium and temperature must be reviewed.
Technical specification
| Product type | 90-degree long-radius butt-weld elbow |
|---|---|
| Material | ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy |
| Material family | Nickel-chromium-molybdenum alloy |
| Dimensional basis | ASME B16.9 90-degree long-radius elbow |
| Configuration | 90-degree long radius; nominal centerline radius 1.5D for standard ASME geometry |
| Nominal size | Standard ASME sizes and schedules; heavy wall and custom tangent lengths subject to review |
| Wall thickness | Standard schedules, heavy wall and project-specific wall subject to manufacturing review |
| Construction | Seamless or welded as applicable, ordered and permitted by the material class |
| End preparation | Butt-weld bevel matched to connecting pipe wall and approved welding detail |
| Heat treatment | Solution treatment and final condition as required by ASTM B366 and the ordered class |
| Documentation | EN 10204 3.1 MTC, heat traceability, PMI, dimensions and additional NDE as ordered |
Available size and wall combinations depend on alloy, forming route, construction and quantity. Confirm the exact pipe outside diameter and wall in the RFQ.
Standards and technical references
Dimensional standard
ASME B16.9 covers standard factory-made wrought butt-weld long-radius elbow dimensions, tolerances, marking and related requirements.
Material specification
ASTM B366/B366M covers factory-made wrought nickel and nickel-alloy pressure-piping fittings.
Why select Inconel 625?
UNS N06625 is considered for seawater, offshore topsides, chemical processing, pollution-control systems and other corrosive duties where the approved material class calls for Alloy 625.
| Selection point | Inconel 625 | Incoloy 825 |
|---|---|---|
| Alloy family | Ni-Cr-Mo-Nb | Ni-Fe-Cr-Mo-Cu-Ti |
| Strength | Generally higher | Moderate, service-dependent |
| Typical focus | Seawater, chloride and severe mixed environments | Acid and reducing/oxidizing process environments |
| Selection | Verify corrosion data for exact conditions | Verify corrosion data for exact conditions |
Typical applications
| Industry | Typical fitting duty | Why this material is considered |
|---|---|---|
| Offshore and marine | Directional change in process and utility piping | Seawater and chloride-bearing systems |
| Chemical processing | Equipment connection where a smooth 90-degree sweep is required | Mixed corrosive process streams |
| Environmental systems | High-integrity welded line routing with standard long-radius geometry | Scrubbers and pollution-control piping |
Application examples are selection context, not a design approval. Confirm process chemistry, pressure, temperature, weld procedure and governing code.
Manufacturing, inspection and documentation
Long-radius elbow manufacture requires control of angle, center-to-end dimension, centerline radius, wall thinning, ovality and bevel geometry. N06625 orders commonly specify PMI, solution-treatment records, surface examination and construction-class/NDE requirements.
Heat-number traceability and PMI when specified.
Angle, center-to-end, radius, OD, wall thinning, ovality and bevel checked.
PT, MT where applicable, UT, RT or third-party witnessing to the ordered scope.
MTC, heat-treatment and inspection records compiled to project requirements.
RFQ checklist
- Complete material grade and UNS where applicable
- ASME B16.9 edition or approved project drawing
- Run, outlet and branch sizes
- Schedule or exact wall thickness at every end
- Seamless or welded construction/class
- Bevel detail and matching pipe dimensions
- Quantity, destination and required delivery date
- EN 10204 3.1, PMI, dimensional and NDE requirements
Frequently asked questions
What is a Inconel 625 90 degree long radius elbow?
It is a 90-degree long-radius butt-weld elbow manufactured from ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy. For standard 90-degree long-radius elbows, the centerline radius is 1.5 times the nominal pipe size. The ordered material specification controls chemistry, mechanical properties, heat treatment and testing.
Which standard applies to this fitting?
ASME B16.9 covers standard factory-made wrought butt-weld long-radius elbow dimensions, tolerances, marking and related requirements. The material basis is ASTM B366/B366M, UNS N06625 nickel-chromium-molybdenum-niobium alloy. The purchase order must state the required edition, construction, size, wall and supplementary examinations.
Where is Inconel 625 typically selected?
UNS N06625 is considered for seawater, offshore topsides, chemical processing, pollution-control systems and other corrosive duties where the approved material class calls for Alloy 625. Material suitability still depends on fluid chemistry, pressure, temperature, fabrication, corrosion allowance and the governing piping code.
Can heavy-wall and welded construction be supplied?
Yes, subject to manufacturing review. Provide the exact outside diameter, wall thickness or schedule, construction class, end preparation, quantity and NDE requirements so feasibility can be confirmed.
What should an RFQ include?
State the complete material grade, dimensional standard or approved drawing, run and branch sizes, schedule or exact wall, seamless or welded construction, bevel detail, quantity, destination, certification and inspection scope.
Product image is representative. Surface appearance varies by alloy, manufacturing route and finish.
Request a technical quotation
Send the material, size combination, wall, quantity, drawing or standard, and inspection requirements for review.
