Описание
Детали продукта
AL6XN lap joint flanges are loose backing flanges designed to be used with a lap joint stub end, позволяющее легко выравнивать, dismantling and maintenance in corrosive pipeline systems. Made from super austenitic 6Mo stainless steel, they provide outstanding resistance to chloride pitting, щелевая коррозия и коррозионное растрескивание под напряжением, making them suitable for seawater, рассол, bleaching chemicals, sulfuric media and aggressive process fluids.
SASA FLANGE supplies AL6XN lap joint flanges in standard and customized sizes according to ASME, EN, DIN, JIS, GB и проектные чертежи. Every batch can be provided with chemical analysis, механические испытания, проверка размеров, Тестирование PMI, EN 10204 3.1 сертификат и полная отслеживаемость номера плавки для поддержки важнейших требований к промышленным закупкам.
- ✓Название продукта: AL6XN Lap Joint Flange
- ✓Марка материала: UNS N08367 super austenitic stainless steel
- ✓Тип продукта: Lap Joint Flange used with lap joint stub end
- ✓Основная особенность: Excellent chloride corrosion resistance with easy alignment and dismantling
- ✓Приложения: Химическая обработка, опреснение, оффшорный, целлюлоза и бумага, очистка воды, морской трубопровод
Параметры продукта
| Название продукта | AL6XN Lap Joint Flanges |
| Марка материала | UNS N08367 (АЛ6ХН), 1.4529 / equivalent 6Mo grades on request |
| Тип материала | Super austenitic stainless steel |
| Форма продукта | Кованый фланец внахлестку, machined lap joint backing flange |
| Диапазон размеров | Ду15 — Ду1500 (1/2 дюйм — 60 дюйм) |
| Класс давления | Сорт 150 — 600 / PN10 — Ру40 |
| Уплотняющая поверхность | Плоский торцевой контакт с заглушкой нахлесточного соединения, RF profile to suit stub end assembly, special facings on request |
| Обработка поверхности | Маринованный, пассивированный, обработанная отделка, protective oil on carbon steel-contact surfaces if required |
| Стандартный | ASME B16.5, ASME B16.47, EN 1092-1, DIN, JIS B2220, ГБ/Т 9119 или спецификация клиента |
| Инспекция | Химический анализ, Механические испытания, Тест PMI, Размерный, Визуальный и поверхностный осмотр |
| Сертификат | EN 10204 3.1 Имеется сертификат на материал |
| Служба обработки | Резка, обработка с ЧПУ, Индивидуальное бурение, Обработка нестандартного размера |
Химический состав
The following chemical composition is a typical reference for AL6XN material used in lap joint flanges. Actual composition may vary within standard limits depending on the mill heat and product form. Final chemistry is supplied according to the applicable material standard and the certified mill test certificate for each batch.
| Элемент | С | И | Мин. | П | С | Кр | В | Мо | Другой |
|---|---|---|---|---|---|---|---|---|---|
| Содержание % | 0.03 Макс | 1.00 Макс | 2.00 Макс | 0.040 Макс | 0.030 Макс | 20.0 — 22.0 | 23.5 — 25.5 | 6.0 — 7.0 | Н 0.18 — 0.25, Cu 0.75 Макс |
Механические свойства
Mechanical properties shown below are typical reference values for AL6XN and equivalent 6Mo super austenitic material. Actual values can vary by heat treatment condition, product thickness, forming method and standard requirement. Certified tensile and related test results are provided based on the material test certificate and project specification when required.
| Оценка | Предел прочности | Предел текучести | Удлинение | Твердость | Плотность |
|---|---|---|---|---|---|
| UNS N08367 Solution Annealed | 650 МПа мин. | 300 МПа мин. | 35% мин | 95 HRB макс. | 8.06 г/см3 |
| Equivalent 6Mo Grade | 650 МПа мин. | 300 МПа мин. | 35% мин | 100 HRB макс. | 8.0 г/см3 |
Таблица общих размеров
| Диапазон размеров | Класс давления | Уплотняющая поверхность | Материал | Доступность |
|---|---|---|---|---|
| Ду15 — Ду50 | Сорт 150 — 300 | коленный сустав | UNS N08367 | Запас / Производство |
| Ду65 — Ду300 | Сорт 150 — 600 | коленный сустав | UNS N08367 | Запас / Производство |
| Ду350 — Ду600 | Сорт 150 — 600 | коленный сустав | UNS N08367 | Производство |
| Ду700 — Ду1500 | Сорт 150 — 300 | коленный сустав | UNS N08367 | На заказ |
Сравнение различных характеристик
| Тип | Описание | Типичное использование |
|---|---|---|
| ASME Фланец внахлестку | Loose backing flange used with a separate stub end under ASME B16.5 или размеры B16.47 | Process piping requiring frequent dismantling and easier bolt alignment |
| EN Фланец внахлестку | European dimension lap joint flange matched with collar or stub end under EN 1092-1 | Химические заводы, water treatment and export projects using PN ratings |
| Forged AL6XN LJF | Machined from forged super austenitic billet for improved integrity and reliable dimensions | Critical corrosion service and medium to high specification piping |
| Custom Drawing LJF | Специальное отверстие, drilling or outside diameter manufactured to client drawing | Replacement flanges, skid packages and OEM equipment |
Эквивалентные стандарты и международные названия
AL6XN is a proprietary trade name commonly associated with UNS N08367 super austenitic stainless steel. In international projects, equivalent dimensional standards may vary by region while the material is specified by UNS, EN number or project-approved 6Mo equivalent. Final matching standard and material designation should be confirmed against the purchase order and technical data sheet.
| Стандартный / Область | Стандартный код | Типичная оценка / Эквивалент |
|---|---|---|
| США | ASME B16.5 | UNS N08367 (АЛ6ХН) |
| Европа | EN 1092-1 | 1.4529 / X1NiCrMoCuN25-20-7 equivalent |
| Германия | DIN 2527 / 2566 | 1.4529 super austenitic stainless steel |
| Япония | JIS B2220 | 6Mo equivalent grade on request |
| Китай | ГБ/Т 9119 | UNS N08367 / 6Mo equivalent on request |
Схема производственного процесса
SASA FLANGE controls each production stage for AL6XN lap joint flanges to ensure corrosion resistance, dimensional accuracy and documentation compliance. Проверка материала, machining precision and final inspection are carefully managed for demanding industrial applications.
- 1. Выбор сырья
- 2. Ковка / Резка
- 3. Термическая обработка
- 4. Грубая обработка
- 5. Завершить обработку
- 6. Бурение
- 7. Обработка поверхности
- 8. Инспекция
- 9. Маркировка
- 10. Упаковка
- 11. Доставка
| Этап процесса | Описание | Пункт контроля качества |
|---|---|---|
| Сырье | Выбирайте сертифицированные кованые заготовки или пластины. | Сертификат материала и отслеживаемость |
| Ковка | Горячая ковка для достижения необходимой формы. | Температура ковки и степень обжатия |
| Термическая обработка | Solution annealing as required for super austenitic stainless steel | Контроль температуры и времени выдержки |
| Обработка | Seating area, bolt holes and dimensions finished by CNC machining | Точность размеров и чистота поверхности |
| Инспекция | Окончательная проверка перед отправкой | Измерение, поверхность, PMI, маркировка и проверка документов |
Проверка продукта
1. Проверка химического состава
Chemical composition inspection is carried out to verify that the AL6XN material meets the required limits for chromium, никель, молибден, nitrogen and other alloying elements. This is essential for corrosion resistance in chloride-bearing environments. Test results are reviewed against the applicable standard and corresponding mill test certificate before production release.
2. Испытание механических свойств
Mechanical testing is performed to confirm tensile strength, предел текучести, elongation and hardness values for the supplied material condition. These tests help ensure the flange can withstand assembly loads and service stresses. Для заказов проектов, test records can be linked to the heat number and provided as part of the quality dossier.
3. Проверка размеров
Each lap joint flange is checked for outside diameter, размер отверстия, толщина, болт круг, диаметр отверстия, number of holes and facing geometry according to the applicable standard. Dimensional inspection is important for proper fit-up with stub ends, gaskets and mating flanges, reducing installation problems at site and ensuring interchangeability.
4. PMI-тестирование и гидростатические испытания
PMI testing is conducted to confirm the alloy identity of AL6XN material and prevent grade mix-up during manufacturing and packing. While hydrostatic testing is generally applied to assembled piping components rather than loose flanges, related inspection support can be provided for project requirements. EN 10204 3.1 сертификат, PMI reports and inspection records are available on request.
Упаковка продукта
- ✓Упаковка из деревянного ящика: Подходит для продуктов высокого давления и большого диаметра.
- ✓Упаковка поддонов в термоусадочную пленку: Подходит для партийных поставок и стандартных размеров.
- ✓Антикоррозионное масляное покрытие + Водонепроницаемая бумага: Используется для защиты морских грузов.
- ✓Индивидуальный полиэтиленовый пакет + Картонная коробка: Используется для небольших фитингов и резьбовых изделий.
- ✓Четкая маркировка: Оценка, размер, класс давления, номер плавки и номер заказа
Приложения
AL6XN lap joint flanges are widely used in aggressive chloride and chemically corrosive service where conventional stainless steel may fail. Their loose flange design simplifies installation and maintenance, while the super austenitic alloy provides long-term resistance in severe industrial environments.
| Промышленность | Типичные применения | Почему используется этот продукт |
|---|---|---|
| Нефть и газ | Линии пластовой воды, seawater injection systems, морские инженерные трубопроводы | High resistance to chloride pitting and crevice corrosion in saline environments |
| Химическая обработка | Линии перекачки кислоты, bleach chemical piping, reactor and tank connections | Excellent corrosion resistance and easy flange alignment during maintenance |
| Производство электроэнергии | системы ДДГ, condensate and corrosive auxiliary lines | Suitable for wet, chloride-bearing service and long-term reliability |
| Очистка воды | Опреснительные установки, трубопровод для рассола, RO skids and dosing systems | Performs well in seawater, brine and high-chloride process media |
| Морской и оффшорный | Shipboard seawater systems, offshore modules and deck piping | Combines corrosion resistance with easier dismantling in confined installations |
Почему выбирают SASA FLANGE?
- ✓Профессиональный производитель фланцев внахлестку для глобальных промышленных проектов.
- ✓Индивидуальный размер, класс давления и марка материала согласно чертежам
- ✓Полная стандартная поддержка: ASME, EN, DIN, JIS, ГБ, ГОСТ и спецификации заказчика
- ✓Отслеживание материалов с контролем номера плавки и EN 10204 3.1 сертификат материала
- ✓Химический анализ, механические испытания, Тестирование PMI, гидростатический и размерный контроль
- ✓Наличие на складе стандартных позиций, Время выполнения 3-7 дни; изготовление на заказ 15-30 дни
- ✓Экспортная упаковка для моря., воздушный и наземный транспорт
- ✓15+ многолетний опыт поставок 50+ страны мира
Часто задаваемые вопросы
вопрос: What is an AL6XN lap joint flange?
А: An AL6XN lap joint flange is a loose backing flange manufactured from UNS N08367 super austenitic stainless steel and used together with a lap joint stub end. It allows flange rotation for easier bolt alignment and faster maintenance. It is selected for corrosive services where strong resistance to chlorides, pitting and crevice corrosion is required.
вопрос: What materials are available for AL6XN lap joint flanges?
А: Основной материал – UNS N08367, commonly known as AL6XN. Для международных проектов, equivalent super austenitic 6Mo grades such as EN 1.4529 may also be supplied depending on specification and approval. SASA FLANGE can also provide matching stub ends in compatible corrosion-resistant materials to complete the lap joint flange assembly.
вопрос: Какой класс давления поддерживается?
А: AL6XN lap joint flanges are commonly supplied in ASME Class 150, 300 и 600, with PN10, PN16, PN25 and PN40 options for EN and DIN projects. Higher dimensions can be manufactured depending on design and material availability. The final pressure rating should match the selected standard, wall thickness and associated stub end configuration.
вопрос: Может SASA FLANGE поставляем нестандартные размеры?
А: Да. SASA FLANGE can manufacture custom AL6XN lap joint flanges according to customer drawings or project standards. We support special bore sizes, нестандартное сверление болтов, customized outside diameters, special matching dimensions for stub ends and additional machining requirements. This service is suitable for replacement projects, OEM equipment and skid-mounted systems.
вопрос: Какой сертификат предоставляется?
А: SASA FLANGE может предоставить EN 10204 3.1 сертификат материала, сертификат испытаний мельницы, chemical composition report, результаты механических испытаний, dimensional inspection records and PMI test report for AL6XN lap joint flanges. Additional third-party inspection support can also be arranged when required by the project. Full heat number traceability is maintained from raw material to finished product.
Связаться с нами
If you are looking for al6xn flanges or related custom flange products, пожалуйста, свяжитесь SASA FLANGE с вашим необходимым размером, класс давления, сорт материала, стандартный, обработка поверхности, требования к количеству и проверке. Наша команда предоставит профессиональные технические решения и конкурентоспособные предложения в течение 24 часы.
- 📧 Электронная почта: sales@sasaflange.com
- 📱Ватсап: +86 13764965049
- ☎️Тел.: +86 21 52236361
- 🌐 Сайт: www.sasaflange.com







