Flanges are vital components used to connect pipes, клапаны, насосы, and other equipment in various industrial systems. Чтобы обеспечить безопасность, совместимость, и производительность, flanges are designed and manufactured according to internationally recognized standards such as ASME B16.5, EN 1092-1, DIN, JIS, и другие.

Understanding flange standards requires familiarity with several key parameters. Среди них, three critical parameters determine the functionality and interchangeability of flanges: номинальное давление, тип лица, и размерный допуск. These parameters not only affect the mechanical integrity of the flange but also dictate how well it mates with piping systems.

В этой статье, we will explore these three important parameters in detail and explain why they are essential for manufacturers, инженеры, и специалисты по закупкам.

Company Logo: Сасафланж

---

Parameter 1: Номинальное давление (Class or PN)

What is Pressure Rating?

The pressure rating of a flange indicates the maximum pressure it can withstand under specified temperature conditions. It is a critical factor in ensuring the safety and durability of a piping system.

Depending on the standard used, pressure ratings are represented differently:

• АСМЭ/АНСИ: Сорт 150, 300, 600, 900, 1500, и 2500

• ОДИН/ВАШ: ПН 6, ПН 10, ПН 16, ПН 25, ПН 40, ПН 64, и т. д..

Why Pressure Rating Matters

Choosing the correct pressure class ensures the flange can resist system pressure without deformation, утечка, or failure. If the pressure rating is too low, it can result in catastrophic consequences including pipe rupture, environmental contamination, or injury.

Factors Influencing Pressure Rating

• Марка материала: Нержавеющая сталь, углеродистая сталь, and duplex have different pressure capacities.

• Температура: Higher temperatures lower the effective pressure resistance.

• Дизайн: Толщина, разболтовка, and face type influence pressure class.

Pressure Rating Example

Класс 150 flange made from stainless steel may handle a maximum of 19.6 bar at 100°F, but this drops significantly as temperature increases. Сходным образом, a PN40 flange is rated for 40 бар under ambient conditions, but the actual performance depends on the material and temperature.

sasaflange provides pressure-tested flanges across all classes and PN levels, in compliance with ASME and EN specifications.

---

Parameter 2: Тип фланца

What is Flange Face Type?

The flange face is the sealing surface that comes in contact with a gasket to form a leak-proof seal. There are several types of flange faces, each suited for different applications and pressure ratings.

Common Face Types

1. Поднятое лицо (РФ)

   • Most common face type

   • Raised ring around the bore

   • Compatible with flat or spiral wound gaskets

   • Found in ASME and EN flanges

2. Плоское Лицо (ФФ)

   • Вся поверхность фланца плоская

   • Used in low-pressure systems and with cast iron

   • Gasket must cover the full face

3. Кольцевое соединение типа (РТЖ)

   • Grooved face with metal ring gasket

   • Высокое давление, высокотемпературные системы

   • Requires precise machining

4. Язык и паз / Мужчина и Женщина

   • Specialized face types for alignment-sensitive systems

   • Often used in heat exchangers

Why Face Type Matters

• Ensures leak-tight sealing под давлением

• Affects gasket selection and installation

• Influences assembly time and cost

• Incompatible face types can lead to misalignment or leakage

sasaflange supplies flanges with all major face types, machined to high precision for dependable gasket performance and system reliability.

---

Parameter 3: Dimensional Tolerances

What Are Dimensional Tolerances?

Dimensional tolerance refers to the allowable deviation from nominal measurements in a flange’s size. К ним относятся:

• Внешний диаметр (ИЗ)

• Диаметр окружности болта (двоично-десятичный код)

• Number and position of bolt holes

• Bore diameter

• Hub dimensions

• Толщина

• Face height

Standards define acceptable limits for each dimension to ensure flanges from different manufacturers can mate correctly.

Importance of Dimensional Tolerances

• Взаимозаменяемость: Components from different suppliers must fit perfectly

• Sealing integrity: Incorrect bolt alignment can damage gaskets

• Безопасность: Mismatched flanges can leak or fail under pressure

• Простота установки: Precision speeds up alignment and bolting

Dimensional Control in Practice

Сасафланец, all flanges are CNC machined and go through strict dimensional inspections. Precision tools such as calipers, coordinate measuring machines (ШМ), and laser scanners are used to verify:

• Flange OD and thickness

• Bolt hole pitch circle diameter and spacing

• Bore alignment with mating pipe

• Face flatness and perpendicularity

All dimensions conform to tolerances outlined in ASME B16.5, ASME B16.47, и RU 1092-1.

---

Interrelation Between the Parameters

These three parameters are interdependent. Например:

• A higher номинальное давление often requires a поднятое лицо или Лицо RTJ to handle gasket stress.

• Tighter dimensional tolerances are critical for РТЖ flanges to ensure a perfect metal-to-metal seal.

• Different face types require specific bolt circle dimensions and gasket sizes.

Failing to consider one parameter can undermine the performance of the other two. That’s why professional suppliers like sasaflange emphasize holistic flange engineering rather than treating each factor in isolation.

---

How to Specify a Flange Correctly

When sourcing a flange, it is essential to specify all three parameters accurately:

1. Номинальное давление: Based on system pressure and temperature

2. Face type: Depending on gasket type and sealing performance required

3. Dimensional standard and tolerance: To ensure compatibility with existing equipment

Example specification:

• ASME B16.5, Сорт 300, 4-inch Weld Neck Flange, RF Face, Нержавеющая сталь 316L

sasaflange helps customers define these parameters during the design and procurement process to ensure smooth project execution.

---

Заключение

Understanding the three most important parameters in flange standards—номинальное давление, тип лица, и размерный допуск—is critical for safe, эффективный, and reliable piping system operation.

These parameters not only ensure that flanges perform under pressure but also allow for compatibility between components sourced from different manufacturers and countries.

sasaflange specializes in the production and supply of standard and custom stainless steel flanges. Со строгим контролем качества, точность размеров, and full documentation support, we help clients meet the toughest project requirements across the globe.