Incoloy 800 Yüksek Sıcaklık Hizmeti için Bindirmeli Bağlantı Flanşları

Kategori:

Incoloy 800 bindirme flanşları mükemmel oksidasyon için tasarlanmış nikel-demir-krom alaşımlı flanşlardır, aşındırıcı maddelerde karbürizasyon ve ısı direnci, yüksek sıcaklık boru sistemleri. Alaşımlı olarak mevcuttur 800, 800H ve 800HT kaliteleri, they are widely used in petrochemical, fırın, power and chemical plants. SASA FLANGE supplies these lap joint flanges with EN 10204 3.1 sertifika, PMI testi, dimensional inspection and full heat number traceability for reliable global project use.

  • ✓Seviye: Incoloy 800, Incoloy 800H, Incoloy 800HT, UNS N08800, N08810, N08811
  • ✓Yüzey: Doğal işlenmiş kaplama, salamura, pasifleştirilmiş, protective oil for machined areas, ihracat için işaretlendi ve paketlendi
  • ✓Şartname: DN15 - DN1500 (1/2 inç ila 60 inç), Sınıf 150 ile 2500, PN6'dan PN100'e

Tanım

Ürün Detayı

Incoloy 800 lap joint flanges are loose-type flanges used together with a stub end, kolay hizalamaya izin verir, simplified installation and convenient dismantling of piping systems. Manufactured from nickel-iron-chromium alloy, they offer excellent resistance to oxidation, carburization and many high-temperature corrosive environments. These flanges are widely used in thermal processing equipment, petrokimya hatları, kimyasal tesisler, ısı değiştiriciler, offshore systems and power generation units where both corrosion resistance and service stability are required.

SASA FLANGE supplies Incoloy 800 ASME'ye göre standart ve özelleştirilmiş boyutlarda bindirme flanşları, EN, DIN, JIS ve GB gereksinimleri. Her sipariş kimyasal analizlerle desteklenebilir, mekanik test, boyutsal muayene, PMI testi, EN 10204 3.1 uluslararası proje ve son kullanıcı spesifikasyonlarını karşılamak için sertifika ve tam ısı numarası izlenebilirliği.

  • ✓Ürün adı: Incoloy 800 Bindirme Bağlantı Flanşları
  • ✓Malzeme Sınıfı: Incoloy 800 / 800H / 800HT, UNS N08800 / N08810 / N08811
  • ✓Ürün Tipi: Lap Joint Flange used with Stub End
  • ✓Ana Özellik: Excellent high-temperature oxidation and carburization resistance with easy alignment during installation
  • ✓Uygulamalar: Petrokimya, ısıl işlem, enerji üretimi, deniz, offshore and chemical processing pipelines

Ürün Parametreleri

Ürün adı Incoloy 800 Tur eklem flanşı
Malzeme Sınıfı Incoloy 800, Incoloy 800H, Incoloy 800HT, UNS N08800, UNS N08810, UNS N08811
Malzeme Türü Nickel-Iron-Chromium Heat Resistant Alloy
Ürün Formu Forged Lap Joint Flange / Machined Lap Joint Flange
Boyut Aralığı DN15 – DN1500 (1/2 inç – 60 inç)
Basınç Sınıfı Sınıf 150 – 2500 / PN6 – PN100
Sızdırmazlık Yüzü RF, FF, RTJ, Dil ve Oluk, Erkek ve Kadın
Yüzey İşlem Doğal işlenmiş, salamura, pasifleştirilmiş, protective oil on machined surface
Standart ASME B16.5, ASME B16.47, EN 1092-1, DIN 2642, JIS B2220, GB/T 9119 veya müşteri spesifikasyonu
Denetleme Kimyasal Analiz, Mekanik Test, PMI Testi, Boyutsal Muayene, Hydrostatic Test when required
Sertifika EN 10204 3.1 Malzeme Sertifikası mevcut
İşleme Hizmeti Kesme, CNC İşleme, Özel Delme, Özel Ebat İşleme

Kimyasal Bileşim

The following chemical composition is for reference for standard Incoloy 800 material used for lap joint flanges. Actual composition may vary slightly by grade such as 800, 800H or 800HT, melting route and applicable specification. Final delivered chemistry shall conform to the relevant ASTM or EN standard and the mill test certificate.

Öğe C Ve Mn P S CR İçinde Ay Diğer
İçerik % 0.10 maksimum 1.00 maksimum 1.50 maksimum 0.030 maksimum 0.015 maksimum 19.0 – 23.0 30.0 – 35.0 0.75 maksimum Fe dengesi, Al 0.15 – 0.60, İle ilgili 0.15 – 0.60, Cu 0.75 maksimum

Mekanik Özellikler

Mechanical properties shown below are typical reference values for commonly specified Incoloy 800 grades used in flange production. Actual test results can vary depending on grade, solution annealed condition, kesit kalınlığı ve dövme işlemi. SASA FLANGE verifies required tensile and hardness values according to applicable material standards and project specifications.

Seviye Çekme Dayanımı Akma Dayanımı Uzama Sertlik Yoğunluk
Incoloy 800 (UNS N08800) 520 MPa dk. 205 MPa dk. 30% dk. 170 YB maks 7.94 g/cm3
Incoloy 800H/800HT (UNS N08810/N08811) 450 MPa dk. 170 MPa dk. 30% dk. 179 YB maks 7.94 g/cm3

Ortak Boyut Tablosu

Boyut Aralığı Basınç Sınıfı Sızdırmazlık Yüzü Malzeme Kullanılabilirlik
DN15 – DN50 Sınıf 150 – 600 RF Incoloy 800 / 800H Stoklamak / Üretme
DN65 – DN300 Sınıf 150 – 1500 RF / RTJ Incoloy 800 / 800H / 800HT Stoklamak / Üretme
DN350 – DN600 Sınıf 150 – 2500 RF / RTJ Incoloy 800 / 800HT Üretme
DN700 – DN1500 Sınıf 150 – 900 RF Incoloy 800 Sipariş Üzerine Üretildi

Farklı Özellikler Karşılaştırması

Tip Tanım Tipik Kullanım
ASME Bindirme Bağlantı Flanşı Loose flange used with lap joint stub end according to ASME dimensions Petrochemical and process piping requiring easy dismantling
TR Bindirme Bağlantı Flanşı Flange manufactured to EN 1092-1 dimensions for use with corresponding stub ends European industrial plants and pressure piping systems
Yükseltilmiş Yüzlü Bindirme Bağlantı Flanşı Machined with raised face contact profile where specified by project design Higher pressure systems needing controlled gasket seating
Düz Yüzlü Bindirme Bağlantı Flanşı Flat seating surface suitable for full face gasket arrangements Low to medium pressure lines and utility services

Eşdeğer Standartlar ve Uluslararası İsimler

Incoloy 800 lap joint flanges can be produced to major international flange standards, while the material grade is generally referenced by UNS, ASTM or EN alloy designation. Eşdeğer adlandırma bölgeye göre farklılık gösterebilir, but dimensional, inspection and certification requirements can be matched to the customer standard for global procurement and project compliance.

Standart / Bölge Standart Kod Tipik Sınıf / Eş değer
Amerika ASME B16.5 Incoloy 800 / UNS N08800, 800H / N08810, 800HT / N08811
Avrupa EN 1092-1 Alaşım 800 equivalent Ni-Fe-Cr heat resistant alloy to customer material specification
Almanya DIN 2642 / 2673 Werkstoff equivalent by customer request for lap joint flange and loose flange applications
Japonya JIS B2220 Incoloy 800 equivalent nickel alloy material as per project requirement
Çin GB/T 9119 NS1101 / UNS N08800 equivalent subject to approved material specification

Üretim Süreci Akışı

SASA FLANGE controls each manufacturing stage of Incoloy 800 lap joint flanges to ensure alloy integrity, dimensional accuracy and reliable service performance in high-temperature and corrosive piping systems.

  • 1. Hammadde Seçimi
  • 2. Dövme / Kesme
  • 3. Isıl işlem
  • 4. Kaba İşleme
  • 5. Son İşleme
  • 6. Sondaj
  • 7. Yüzey İşlem
  • 8. Denetleme
  • 9. İşaretleme
  • 10. Ambalaj
  • 11. Teslimat
Süreç Adımı Tanım Kalite Kontrol Noktası
Hammadde Sertifikalı dövme kütüklerini veya plakalarını seçin Malzeme sertifikası ve izlenebilirlik
Dövme İstenilen şekli elde etmek için sıcak dövme Dövme sıcaklığı ve indirgeme oranı
Isıl işlem Solution annealing or controlled heat treatment as specified Sıcaklık ve bekletme süresi kontrolü
İşleme Sızdırmazlık yüzü, cıvata delikleri, boyutlar Boyutsal doğruluk ve yüzey kalitesi
Denetleme Sevkiyat öncesi son muayene Boyut, yüzey, PMI, hidrostatik

Ürün Denetimi

1. Kimyasal Bileşim Denetimi

Chemical analysis is carried out to verify that the Incoloy 800 alloy meets specified limits for nickel, krom, karbon, manganez, silicon and other controlled elements. This inspection confirms correct material grade before production and shipment, helping ensure high-temperature corrosion resistance and compliance with applicable ASTM, EN or customer specifications.

2. Mekanik Özellikler Testi

Mekanik testler çekme mukavemetini doğrular, akma dayanımı, Gerekli ısıl işlem sonrasında flanş malzemesinin uzaması ve sertliği. These tests confirm the forged Incoloy 800 lap joint flange has the necessary strength and ductility for service. Test results are reviewed against applicable standards and can be included in the mill test certificate.

3. Boyutsal Muayene

Boyutsal inceleme dış çapı kapsar, iç çap, kalınlık, cıvata dairesi, cıvata deliği boyutu, number of holes and facing geometry. Bindirme bağlantı flanşları için, accurate seating and matching with the stub end are critical. SASA FLANGE inspects each batch to ensure compliance with ASME, EN, DIN, JIS, GB or custom drawings.

4. PMI Testi ve Hidrostatik Test

Positive Material Identification is performed to confirm alloy grade and prevent mixed material risk, especially for nickel alloy orders. Hydrostatic pressure testing can be arranged when required by project specifications or end users. EN 10204 3.1 sertifika, heat number traceability and relevant inspection reports are supplied to support quality assurance and documentation.

Ürün Ambalajı

  • ✓Ahşap Sandık Ambalajı: Yüksek basınçlı ve büyük çaplı ürünler için uygundur
  • ✓Shrink Wrap ile Palet Ambalajı: Toplu gönderiler ve standart boyutlar için uygundur
  • ✓Pas önleyici Yağ Kaplama + Su geçirmez Kağıt: Okyanus taşımacılığı koruması için kullanılır
  • ✓Bireysel Plastik Poşet + karton: Küçük bağlantı parçaları ve dişli ürünler için kullanılır
  • ✓İşaretlemeyi Temizle: Seviye, boyut, basınç sınıfı, ısı numarası ve PO numarası

Uygulamalar

Incoloy 800 lap joint flanges are selected for piping systems operating in high-temperature, oxidizing and moderately corrosive environments. Gevşek flanş tasarımları kurulumu ve bakımı kolaylaştırır, while the alloy provides long-term performance where conventional stainless steel may not be sufficient. They are commonly specified in process industries requiring heat resistance, corrosion control and reliable traceable materials.

Endüstri Tipik Uygulamalar Bu Ürün Neden Kullanılıyor?
Petrol ve Gaz Heater lines, hot process piping, refinery transfer systems Provides oxidation resistance and easier maintenance with lap joint assembly
Kimyasal İşleme Acid service support lines, reaktörler, ısı değiştiriciler, proses boruları Nickel alloy resists aggressive media and elevated operating temperatures
Güç Üretimi Kazan yardımcı hatları, high-temperature utility piping, emission control systems Maintains strength and service stability under thermal cycling conditions
Su Arıtma Special chemical dosing systems and high-chloride auxiliary process lines Offers improved corrosion resistance where standard alloys are inadequate
Denizcilik ve Açık Deniz Offshore module piping, exhaust-related systems, corrosive service utilities Good resistance to harsh environments with convenient flange alignment and replacement

Neden Seçmelisiniz? SASA FLANGE?

  • ✓Global endüstriyel projelere yönelik Bindirme Bağlantı Flanşının profesyonel üreticisi
  • ✓Özelleştirilmiş boyut, çizimlere göre basınç sınıfı ve malzeme kalitesi
  • ✓Tam standart destek: ASME, EN, DIN, JIS, Büyük Britanya, GOST ve müşteri spesifikasyonları
  • ✓Isı numarası kontrolü ile malzeme izlenebilirliği ve EN 10204 3.1 malzeme sertifikası
  • ✓Kimyasal analiz, mekanik test, PMI testi, hidrostatik ve boyutsal muayene
  • ✓Standart ürünler için stok durumu, kurşun zamanı 3-7 günler; özel üretim 15-30 günler
  • ✓Deniz için ihracat kalitesinde ambalaj, hava ve kara taşımacılığı
  • ✓15+ tedarik konusunda uzun yıllara dayanan deneyim 50+ dünya çapındaki ülkeler

SSS

Q: Incoloy Nedir? 800 bindirme flanşı?

A: Bir Incoloy 800 lap joint flange is a loose backing flange used together with a stub end in piping systems. It is made from a nickel-iron-chromium alloy known for high-temperature oxidation and carburization resistance. This flange design allows easier bolt alignment, faster installation and simpler maintenance compared with many fixed-face flange arrangements.

Q: What materials are available for Incoloy 800 bindirme flanşları?

A: SASA FLANGE can supply lap joint flanges in Incoloy 800, Incoloy 800H and Incoloy 800HT, karşılık gelen UNS N08800, N08810 and N08811. Proje gereksinimlerine bağlı olarak, we can also discuss other nickel alloy grades for similar service conditions. Material selection is based on temperature, korozyon ortamı, pressure class and end-user specification.

Q: Hangi basınç sınıfı destekleniyor?

A: Incoloy 800 lap joint flanges are commonly supplied from ASME Class 150 Sınıfa kadar 2500, boyutuna bağlı olarak, design standard and project requirements. EN and DIN pressure ratings such as PN6 to PN100 are also available. The actual supported range depends on dimensional standard, alloy form and whether the flange is standard or specially machined.

Q: Olabilmek SASA FLANGE özel boyutlar sağlayın?

A: Evet. SASA FLANGE supplies both standard and custom Incoloy 800 lap joint flanges based on drawings or technical specifications. We can provide special drilling, standart dışı dış çap, custom bore, bakan tip, matching stub end dimensions and project-specific markings. Customized production is suitable for replacement parts, OEM requirements and special industrial systems.

Q: Hangi sertifika veriliyor?

A: sağlayabiliriz EN 10204 3.1 değirmen test raporları ile birlikte malzeme sertifikası, heat number traceability and dimensional inspection records. PMI testing reports are available for alloy confirmation, and hydrostatic or additional NDT documentation can be arranged if required. Documentation packages are prepared to match project, EPC, trader or end-user quality requirements.

Bize Ulaşın

If you are looking for incoloy 800 flanşlar veya ilgili özel flanş ürünleri, lütfen iletişime geçin SASA FLANGE İstediğiniz boyutta, basınç sınıfı, malzeme kalitesi, standart, yüzey işleme, miktar ve muayene gereksinimleri. Ekibimiz profesyonel teknik çözümler ve rekabetçi fiyat teklifi sunacaktır. 24 saat.

  • 📧 E-posta: Sales@saflange.com
  • 📱WhatsApp: +86 13764965049
  • ☎️ Tel: +86 21 52236361
  • 🌐 Web sitesi: www.sasaflange.com

Mesajınızı Bırakın

    Bedeninizi gönderin, malzeme, standart ve miktar. İçinde cevap vereceğiz 24 saat.

    Resim Yükle / Çizim (isteğe bağlı)

    Kabul edildi: JPEG, PNG, WebP veya PDF. Maksimum dosya boyutu: 5 MB.